Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 7701-7720 of 7723
-
The Design of Modeled Cam Systems—Part I: Dynamic Synthesis and Chart Design For the Two-Degree-of-Freedom Model
(The American Society of Mechanical Engineers (ASME), 1975)An extension of the dynamic synthesis philosophy given earlier [1] for cam follower systems is made in terms of a two-degree-of-freedom model. Three additional dimensionless parameters η, λ, γ ... -
Design Synthesis of Safety Devices on a Logging Trailer: Part 1
(The American Society of Mechanical Engineers (ASME), 1975)A safety device is proposed which enables the driver to dump the loaded trailer in case of emergency. The proposed device is supposed to perform the following operations in sequence. (1) It ... -
An Experimental and Analytical Study of Connection Forces in High-Speed Mechanisms
(The American Society of Mechanical Engineers (ASME), 1975)The increases in the dynamic forces within the connections of high-speed mechanical systems due to connection clearances and mechanism elasticity are of great interest to design engineers. These ... -
Discussion: “Theory for the Effect of Windage on the Lubricant Flow in the Tooth Spaces of Spur Gears” (Akin, L. S., and Mross, J. J., 1975, ASME J. Eng. Ind., 97, pp. 1266–1272)
(The American Society of Mechanical Engineers (ASME), 1975) -
Discussion: “A Foundation for a Unified Theory of Analysis of Spatial Mechanisms” (Duffy, J., and Rooney, J., 1975, ASME J. Eng. Ind., 97, pp. 1159–1164)
(The American Society of Mechanical Engineers (ASME), 1975) -
Discussion: “On the Mechanics of Wire Drawing” (Yang, C. T., 1961, ASME J. Eng. Ind., 83, pp. 523–529)
(The American Society of Mechanical Engineers (ASME), 1961) -
Discussion: “Thermal-Stress Analysis of Irregular Shapes” (Bijlaard, P. P., and Dohrmann, R. J., 1961, ASME J. Eng. Ind., 83, pp. 467–474)
(The American Society of Mechanical Engineers (ASME), 1961) -
Discussion: “Critical Speeds of Two Bearing Machines With Overhung Weight” (Wojnowski, Reyton F., and Faucett, Thomas R., 1961, ASME J. Eng. Ind., 83, pp. 377–379)
(The American Society of Mechanical Engineers (ASME), 1961) -
Discussion: “An Experimental Investigation of the Electrolytic Grinding Process” (Cole, Reno R., 1961, ASME J. Eng. Ind., 83, pp. 194–201)
(The American Society of Mechanical Engineers (ASME), 1961) -
The Free Expansion of Dry and Moist Air
(The American Society of Mechanical Engineers (ASME), 1961)If a gas is permitted to expand freely from a vessel of constant volume, the gas remaining in the vessel is generally considered to undergo reversible adiabatic expansion. For such a case, ... -
Design of Flapper Valves
(The American Society of Mechanical Engineers (ASME), 1961)The principle of minimum potential energy is used to derive the elastic characteristics for a particular type flapper valve (Fig. 1a). The results show that to obtain adequate predictions of ... -
Studies of the Design of Steel Castings and Steel Weldments as Related to Methods of Their Manufacture
(The American Society of Mechanical Engineers (ASME), 1961) -
The Vibration of Shaft Ropes With Time-Variable Length, Treated by Means of Riemann’s Method
(The American Society of Mechanical Engineers (ASME), 1961)Longitudinal vibrations in the ropes of a mining hoist, introduced by application of the emergency brake, are complicated by the change in rope length during the braking action. The usual ... -
Analysis of Buckling Column Spring With Pivoted Ends and Uniform Rectangular Cross Section
(The American Society of Mechanical Engineers (ASME), 1961)Design formulas and working charts are derived for predicting load-deflection characteristics and maximum bending stresses in initially straight buckling column springs, of uniform cross section, ... -
Analysis and Design of Tangent Elasticity Vibration Isolators
(The American Society of Mechanical Engineers (ASME), 1961)General solutions are obtained for the natural frequency and deflection of hardening vibration isolators that fall into the “tangent elasticity” class of nonlinearity for the case of small ... -
On the Use of Clearance in Viscous Dampers to Limit High Frequency Force Transmission
(The American Society of Mechanical Engineers (ASME), 1961)The steady-state vibration of a single degree of freedom system with clearance in the viscous damper is investigated. The results show that the clearance damper combines the low resonant force ... -
An Analysis of the Yielded Compound Cylinder
(The American Society of Mechanical Engineers (ASME), 1961)An analysis is made of the partially plastic range, restricted to plane strain, of the compound cylinder, made by shrinking together many concentric cylinders. An example is given using, for ... -
Stresses in Thin-Walled Pressure Vessels With Ellipsoidal Heads
(The American Society of Mechanical Engineers (ASME), 1961)A finite difference approximation to the Love-Meissner equations for the ellipsoidal shell was used to calculate stresses in thin-walled pressure vessels with ellipsoidal heads. Calculations were ... -
A Systems Analysis of Fast Manned Flights to Venus and Mars—Part II: Storage of Liquid and Solid Hydrogen on Nuclear-Powered Interplanetary Vehicles
(The American Society of Mechanical Engineers (ASME), 1961) -
A Systems Analysis of Fast Manned Flights to Venus and Mars—Part I: Mission Philosophy, Life Support, Scientific Reconnaissance, and Prototype Vehicle Layout
(The American Society of Mechanical Engineers (ASME), 1961)