Journal of Pressure Vessel Technology: Recent submissions
Now showing items 4101-4120 of 4506
-
Near-Contact Explosive Forming
(The American Society of Mechanical Engineers (ASME), 1981)The method of near-contact explosive forming with controlled media is defined and described. Economical examples of the shaping of flat or curved plates with four flat edges, expansion of tubes ... -
An Analytical Assessment of the Effects of Residual Stresses and Fracture Properties on Service Performance of Various Weld Repair Processes
(The American Society of Mechanical Engineers (ASME), 1981)This paper discusses analytical work done to assess the relative importance of residual stresses and fracture mechanics material properties on the service performance of various weld repair ... -
A Plastic Fracture Mechanics Prediction of Fracture Instability in a Circumferentially Cracked Pipe in Bending—Part I: J-Integral Analysis
(The American Society of Mechanical Engineers (ASME), 1981)A method of evaluating the J-integral for a circumferentially cracked pipe in bending is proposed. The method allows a J-resistance curve to be evaluated directly from the load-displacement ... -
Corrosion Fatigue Crack-Growth Behavior of HY-130 Steel and Weldments
(The American Society of Mechanical Engineers (ASME), 1981)Fatigue crack propagation was studied in HY-130 steel base plate, as-deposited shielded metal-arc weld metal, and gas metal-arc weld metal using compact specimens. The effects of seawater, cathodic ... -
Experimental Determination of the Propagation Pressure of Circular Pipes
(The American Society of Mechanical Engineers (ASME), 1981)Local geometric imperfections on pipes under external pressure can lead to local buckling which under the “right” conditions can cause the initiation of a propagating buckle. This buckle, driven ... -
Evaluation of Thermal Conductivity in Layered Vessels
(The American Society of Mechanical Engineers (ASME), 1981)Thermal conductivity in layered vessels is evaluated experimentally from full-scale models. The effects of various parameters, such as wrapping tightness, pressure variation, heating versus cooling, ... -
Transient Cavitation in Fluid-Structure Interactions
(The American Society of Mechanical Engineers (ASME), 1981)A generalized column separation model is extended to predict transient cavitation associated with fluid-structure interactions. The essential feature of the combined fluid-structure interaction ... -
Failure of Safety Valves Due to Flow-Induced Vibration
(The American Society of Mechanical Engineers (ASME), 1980)Flow-induced sonic vibration in boiler safety valve nozzles led to premature valve wear and failure. The valves were mounted just downstream of a 1 1/2 D pipe elbow, in contravention of ... -
Stress Intensity Factor for Corner Cracks of Pressurized Tees
(The American Society of Mechanical Engineers (ASME), 1980)A method based on local stress concentration is employed to estimate stress intensity factors for corner cracks at the crotch corner of pressurized tees. The method yields results which are ... -
Some Further Comments on Limit Pressures for the Cylinder-Cylinder Intersection
(The American Society of Mechanical Engineers (ASME), 1980) -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1980) -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1980) -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1980) -
Buckling Under Normal Pressure of Cylindrical Shells With Various End Conditions
(The American Society of Mechanical Engineers (ASME), 1980)A simplified method of analysis, capable of predicting the buckling pressure of cylindrical shells with varying degrees of end restraint is presented and compared to published results. The case ... -
Design of Radial Nozzles in Cylindrical Shells for Internal Pressure
(The American Society of Mechanical Engineers (ASME), 1980)A design method is presented that allows a designer to predict the maximum allowable working pressure of an opening reinforcement using an allowable stress basis. Primary application of the ... -
Pressure Transient Analysis in Piping Systems Including the Effects of Plastic Deformation and Cavitation
(The American Society of Mechanical Engineers (ASME), 1980)Computational methods for analyzing pressure transients in the intermediate heat transport system of a sodium-cooled breeder reactor are being developed at Argonne National Laboratory. The pressure ... -
Closed-End Cylindrical Shell Under Line Load Along a Generator
(The American Society of Mechanical Engineers (ASME), 1980)This paper presents a numerical technique for elastic analysis of a thin circular cylindrical shell with end plates under uniform line load along a generator. This technique is based upon the ... -
Response of Water-Filled Thin-Walled Pipes to Pressure Pulses: Experiments and Analysis
(The American Society of Mechanical Engineers (ASME), 1980)Experiments are performed to verify modeling techniques used in fluid-structure interaction codes that predict the response of liquid-filled piping systems to strong pressure pulses. Pressure pulses ... -
The Effect of Corner Radius on Plate-Cylinder Intersections
(The American Society of Mechanical Engineers (ASME), 1980)Curves are presented for the stress concentration factors due to inside corner radii between cylinders and flat-head closures. The analysis is based on a finite element study of pressure loaded ... -
Design, Manufacture and Safety Aspects of Forged Vessels for High-Pressure Services
(The American Society of Mechanical Engineers (ASME), 1980)Steels at present included in Sections III and VIII of the ASME Boiler and Pressure Vessel Code severely limit its application for high-pressure design. An extension of the well-known AISI ...