Journal of Pressure Vessel Technology: Recent submissions
Now showing items 4121-4140 of 4506
-
Quasi-Eulerian Finite Element Formulation for Fluid-Structure Interaction
(The American Society of Mechanical Engineers (ASME), 1980)A quasi-Eulerian formulation is developed for fluid-structure interaction analysis in which the fluid nodes are allowed to move independent of the material thus facilitating the treatment of ... -
Morrison and Parry Seals for Water Pressures up to 345 MPa
(The American Society of Mechanical Engineers (ASME), 1980)The use of water in high-pressure jet cutting and machining requires seals capable of sealing reciprocating and rotating shafts with minimal leakage. Both Morrison and Parry seals are studied ... -
Plastic Buckling of Cylindrical Shells Under Axial Compression
(The American Society of Mechanical Engineers (ASME), 1980)Analytical and experimental results are presented for the axisymmetric plastic buckling of axially compressed cylinders made from strain hardening materials. Buckling loads predicted by two simple ... -
Fuel Porosity and Crack Effects on Transient Overpower Analysis
(The American Society of Mechanical Engineers (ASME), 1980)Void volume within an FBR fuel pin is shown to have a substantial effect on predictions of cladding strain and lifetime for transient overpower accident analysis. This void volume is made up ... -
Surface Crack in a Clamped Circular Plate Subjected to Uniform Lateral Pressure
(The American Society of Mechanical Engineers (ASME), 1980)The bending of a clamped circular plate containing a surface crack along its edge is discussed. An approximate method of solution, which is based on the classical plate theory, is proposed ... -
Dynamic Propagation of Circumferential Cracks in Two Pipes With Large-Scale Yielding
(The American Society of Mechanical Engineers (ASME), 1980)The dynamic motions of circumferentially oriented, through cracks in two axially pre-stressed pipes were analyzed by a finite-difference shell code in the presence of large-scale yielding. Lacking ... -
The Effect of Thickness Variations on the Behavior of Smooth Curved Pipes Under External Bending
(The American Society of Mechanical Engineers (ASME), 1980)By various manufacturing techniques straight pipes with initially circular cross sections can be processed into smooth bends but usually with noncircular cross sections and with variations in ... -
Global Bending Response Analysis of Elastic and Viscoplastic Nuclear Shipping Cask Structures Subjected to Impact Loading
(The American Society of Mechanical Engineers (ASME), 1980)Within the framework of lumped mass upgraded beam theory in which rotatory and elastic shear deformation effects are considered, the title analysis is made for the case of large realistic ... -
Kinetics of Void Development in Fracturing A533B Tensile Bars
(The American Society of Mechanical Engineers (ASME), 1980)The phenomenology of fracture in A533B pressure vessel steel was established by examining fractured and partially fractured round bar tensile and Charpy specimens. In the upper shelf region ... -
Erratum: “Verification of Specimens for Low-Cycle Fatigue and Cyclic Plasticity Testing” (Journal of Pressure Vessel Technology, 1979, 101, pp. 321–327)
(The American Society of Mechanical Engineers (ASME), 1980) -
Dynamic Finite Element Analysis of Cracked Bodies
(The American Society of Mechanical Engineers (ASME), 1980)Application of the finite element method to problems involving finite cracked bodies subjected to impact loadings is discussed. Mass matrices for a particularly simple, well-established singular ... -
On the “Slip-On” Buckle Arrestor for Offshore Pipelines
(The American Society of Mechanical Engineers (ASME), 1980)If a pipeline buckles in the presence of sufficiently large external pressure a propagating buckle is initiated. The buckle propagates along the pipeline until it encounters a region of adverse ... -
Time History Input Development for the Seismic Analysis of Piping Systems
(The American Society of Mechanical Engineers (ASME), 1980)In a nonlinear time history analysis of piping systems, the system response is generally highly coupled for all dynamic degrees-of-freedom. Therefore, the seismic time history input components, ... -
Fluid-Structure Interactions in Pressure-Suppression Pools: Small-Scale Experiments and Analysis
(The American Society of Mechanical Engineers (ASME), 1980)Experiments were conducted in a laboratory scale system to investigate fluid structure interaction effects on hydrodynamically induced boundary pressure histories. A single flexible member—a clamped ... -
A Finite Element Model for Elastic and Slip Responses of Fusion Magnets
(The American Society of Mechanical Engineers (ASME), 1980)A finite element model to simulate the elastic and slip responses of fusion magnets under operating loads is proposed. To represent the elastic actions, a material homogenization procedure based ... -
Estimation of Stress Intensity Factors for Embedded Irregular Cracks Subjected to Arbitrary Normal Stress Fields
(The American Society of Mechanical Engineers (ASME), 1980)An integral is developed for calculating opening mode stress intensity factor at any point on the front of an irregular planar crack embedded in an infinite solid and subjected to an arbitrary ... -
The Plastic Modulus Method for Experimental Limit Loads
(The American Society of Mechanical Engineers (ASME), 1980)A theory is proposed such that slopes of tangents drawn to plastic portions of load-displacement curves for the determination of limit loads can be estimated using the elastic portion of ... -
Stresses and Displacements at the Intersection of Two Right Cylindrical Shells Subject to a Nonequilibrated Loading
(The American Society of Mechanical Engineers (ASME), 1980)Cylindrical shells having pipe attachments and branches are extensively used in many industrial installations. Boilers, reactors, and cylindrical tanks are obvious examples. In this investigation ... -
An Approximate Method for the Determination of the Response Frequency of Pipe Whip
(The American Society of Mechanical Engineers (ASME), 1980)This paper is concerned with the effect of fluid flow on the static and dynamic characteristics of a simply supported pipe having a hole through the pipe wall to permit a fluid flow. In ... -
A Theoretical Model for Self-Excited Vibrations in Hydraulic Gates, Valves and Seals
(The American Society of Mechanical Engineers (ASME), 1980)A general theoretical model is presented for the jet flow mechanism of self-excited vibrations of flow control devices operating at small openings. The coupled nonlinear differential equations ...