A Multimodule Planar Air Bearing Testbed for CubeSat Scale SpacecraftSource: Journal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 004::page 45001DOI: 10.1115/1.4023767Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the past several years, small satellites have taken on an increasingly important role as affordable technology demonstrators and are now being viewed as viable lowcost platforms for traditional spacecraft mission objectives. As such, the CubeSat standard (1 kg in a 10 cm cube) has been widely adopted for universityled development efforts even as it is embraced by traditional spacecraft developers, such as NASA. As CubeSats begin to take on roles traditionally filled by much larger spacecraft, the infrastructure for dynamics and controls testing must also transition to accommodate the different size and cost scaling associated with CubeSats. While airbearingbased testbeds are commonly used to enable a variety of traditional ground testing and development for spacecraft, few existing designs are suitable for development of CubeSatscale technologies, particularly involving multibody dynamics. This work describes Cornell University's FloatCube testbed, which provides a planar reducedfriction environment for multibody dynamics and controls technology development for spacecraft less than 6 kg and a 15 cm cube. The multimodule testbed consists of four freefloating airbearing platforms with onboard gas supplies that allow the platforms to float over a glass surface without external attachments. Each of these platforms, or FloatCubes, can host CubeSatsized payloads at widely ranging levels of development, from prototype components to fullscale systems. The FloatCube testbed has already hosted several successful experiments, proving its ability to provide an affordable reducedfriction environment to CubeSatscale projects. This paper provides information on the system design, cost, performance, operating procedures, and applications of this unique, and increasingly relevant, testbed.
|
Show full item record
| contributor author | Wilson, William R. | |
| contributor author | Jones, Laura L. | |
| contributor author | Peck, Mason A. | |
| date accessioned | 2017-05-09T00:57:27Z | |
| date available | 2017-05-09T00:57:27Z | |
| date issued | 2013 | |
| identifier issn | 0022-0434 | |
| identifier other | ds_135_4_045001.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/151339 | |
| description abstract | In the past several years, small satellites have taken on an increasingly important role as affordable technology demonstrators and are now being viewed as viable lowcost platforms for traditional spacecraft mission objectives. As such, the CubeSat standard (1 kg in a 10 cm cube) has been widely adopted for universityled development efforts even as it is embraced by traditional spacecraft developers, such as NASA. As CubeSats begin to take on roles traditionally filled by much larger spacecraft, the infrastructure for dynamics and controls testing must also transition to accommodate the different size and cost scaling associated with CubeSats. While airbearingbased testbeds are commonly used to enable a variety of traditional ground testing and development for spacecraft, few existing designs are suitable for development of CubeSatscale technologies, particularly involving multibody dynamics. This work describes Cornell University's FloatCube testbed, which provides a planar reducedfriction environment for multibody dynamics and controls technology development for spacecraft less than 6 kg and a 15 cm cube. The multimodule testbed consists of four freefloating airbearing platforms with onboard gas supplies that allow the platforms to float over a glass surface without external attachments. Each of these platforms, or FloatCubes, can host CubeSatsized payloads at widely ranging levels of development, from prototype components to fullscale systems. The FloatCube testbed has already hosted several successful experiments, proving its ability to provide an affordable reducedfriction environment to CubeSatscale projects. This paper provides information on the system design, cost, performance, operating procedures, and applications of this unique, and increasingly relevant, testbed. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A Multimodule Planar Air Bearing Testbed for CubeSat Scale Spacecraft | |
| type | Journal Paper | |
| journal volume | 135 | |
| journal issue | 4 | |
| journal title | Journal of Dynamic Systems, Measurement, and Control | |
| identifier doi | 10.1115/1.4023767 | |
| journal fristpage | 45001 | |
| journal lastpage | 45001 | |
| identifier eissn | 1528-9028 | |
| tree | Journal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 004 | |
| contenttype | Fulltext |