Show simple item record

contributor authorWilson, William R.
contributor authorJones, Laura L.
contributor authorPeck, Mason A.
date accessioned2017-05-09T00:57:27Z
date available2017-05-09T00:57:27Z
date issued2013
identifier issn0022-0434
identifier otherds_135_4_045001.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151339
description abstractIn the past several years, small satellites have taken on an increasingly important role as affordable technology demonstrators and are now being viewed as viable lowcost platforms for traditional spacecraft mission objectives. As such, the CubeSat standard (1 kg in a 10 cm cube) has been widely adopted for universityled development efforts even as it is embraced by traditional spacecraft developers, such as NASA. As CubeSats begin to take on roles traditionally filled by much larger spacecraft, the infrastructure for dynamics and controls testing must also transition to accommodate the different size and cost scaling associated with CubeSats. While airbearingbased testbeds are commonly used to enable a variety of traditional ground testing and development for spacecraft, few existing designs are suitable for development of CubeSatscale technologies, particularly involving multibody dynamics. This work describes Cornell University's FloatCube testbed, which provides a planar reducedfriction environment for multibody dynamics and controls technology development for spacecraft less than 6 kg and a 15 cm cube. The multimodule testbed consists of four freefloating airbearing platforms with onboard gas supplies that allow the platforms to float over a glass surface without external attachments. Each of these platforms, or FloatCubes, can host CubeSatsized payloads at widely ranging levels of development, from prototype components to fullscale systems. The FloatCube testbed has already hosted several successful experiments, proving its ability to provide an affordable reducedfriction environment to CubeSatscale projects. This paper provides information on the system design, cost, performance, operating procedures, and applications of this unique, and increasingly relevant, testbed.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Multimodule Planar Air Bearing Testbed for CubeSat Scale Spacecraft
typeJournal Paper
journal volume135
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4023767
journal fristpage45001
journal lastpage45001
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record