Journal of Engineering Materials and Technology: Recent submissions
Now showing items 961-980 of 3257
-
Parametric Finite-Volume Micromechanics of Uniaxial Continuously-Reinforced Periodic Materials With Elastic Phases
(The American Society of Mechanical Engineers (ASME), 2008)The finite-volume direct averaging micromechanics (FVDAM) theory for periodic heterogeneous materials is extended by incorporating parametric mapping into the theory’s analytical framework. The ... -
The Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes
(The American Society of Mechanical Engineers (ASME), 2008)The cold expansion method is one of the most popular techniques in the fatigue enhancement processes, and it has been widely used as a means of improving the fatigue resistance for aircraft ... -
Fatigue of AL6XN Stainless Steel
(The American Society of Mechanical Engineers (ASME), 2008)Tension-compression, torsion, and axial-torsion fatigue experiments were conducted on the AL6XN alloy to experimentally investigate the cyclic plasticity behavior and the fatigue behavior. The ... -
Numerical Modeling of Second-Phase Particle Effects on Localized Deformation
(The American Society of Mechanical Engineers (ASME), 2008)A new finite element analysis based on rate dependent crystal plasticity theory has been developed to investigate the effects of second-phase particles on the initiation and propagation of ... -
High-Resolution Methods for Characterizing Mesoscale Dislocation Structures
(The American Society of Mechanical Engineers (ASME), 2008)It has become apparent through experimentation at the micro- and nanolevels that the crystalline defects known as dislocations have significant effects on a material’s properties. Accordingly, a ... -
Stress Gradient Induced Strain Localization in Metals: High Resolution Strain Cross Sectioning via Synchrotron X-Ray Diffraction
(The American Society of Mechanical Engineers (ASME), 2008)Strain localization in the presence of a stress gradient is a phenomenon common to many systems described by continuum mechanics. Variations of this complex phenomenon lead to interesting nonlinear ... -
Dispersion Characterization of Nanoclay in Molded Epoxy Disks by Combined Image Analysis and Wavelength Dispersive Spectrometry
(The American Society of Mechanical Engineers (ASME), 2008)The state of nanoclay dispersion in a molded epoxy disk and its effects on the thermomechanical properties of the resulting nanocomposite are analyzed. A commercially available nanoclay, ... -
Multiscale Thermodynamic Basis of Plastic Potential Theory
(The American Society of Mechanical Engineers (ASME), 2008)In this paper, the multiscale thermodynamic basis of the plastic potential theory is addressed within the irreversible thermodynamic framework with internal variables by (1971, “ Inelastic ... -
A Model for the Determination of Residual Fatigue Life of a Nickel-Based Superalloy
(The American Society of Mechanical Engineers (ASME), 2008)In this paper, both the dissipation of the plastic-strain energy and the exhaustion of the static toughness during high-temperature low-cycle fatigue of GH4145/SQ superalloy were investigated. ... -
Properties of Friction-Stir Welded Aluminum Alloys 6111 and 5083
(The American Society of Mechanical Engineers (ASME), 2008)Friction-stir welding (FSW) promises joints with low porosity, fine microstructures, minimum phase transformation, and low oxidation compared with conventional welding techniques. It is capable of ... -
Reducing Residual Stress in 7050 Aluminum Alloy Die Forgings by Heat Treatment
(The American Society of Mechanical Engineers (ASME), 2008)Aerospace aluminum alloy forgings can have the residual stresses arising from heat treatment reduced by modification to the quench cooling rates and subsequent aging treatments. A series of ... -
Constitutive Modeling and Finite Element Analysis of the Formability of TRIP Steels
(The American Society of Mechanical Engineers (ASME), 2008)The semiphysics constitutive model developed by (2006, “ From Micro to Macroscopic Description of Martensitic Transformation in Steels: A Viscoplastic Model,” Philos. Mag., in press;Philos. Mag. ... -
Detection and Monitoring of Corrosion in Structural Carbon Steels Using Electromagnetic Sensors
(The American Society of Mechanical Engineers (ASME), 2008)An electromagnetic sensor was assessed as a possible instrument for nondestructive detection and monitoring of corrosion in structural carbon steels. In this study, the magnetic response of three ... -
Metallurgical Phenomena Modeling in Friction Stir Welding of Aluminium Alloys: Analytical Versus Neural Network Based Approaches
(The American Society of Mechanical Engineers (ASME), 2008)In this paper, the metallurgical phenomena occurring in friction stir welding processes of AA6082-T6 and AA7075-T6 aluminum alloys are investigated. In particular, to predict the local values of ... -
Flow and Mold Filling Modeling and Simulation to Enhance Resin Transfer Molding Processes
(The American Society of Mechanical Engineers (ASME), 2008)Among the multiple stages of the resin transfer molding (RTM) processes, flow and mold filling of injected resin correspond to the most complex and crucial stage. During the latter, air bubble ... -
Failure of Cylindrical Brittle Deposits Impacted by a Supersonic Air Jet
(The American Society of Mechanical Engineers (ASME), 2008)The failure of a cylindrical brittle material impacted by a supersonic air jet is investigated. Gypsum was cast around steel tubes to simulate the deposit formed on tube surfaces in industrial ... -
Constitutive Behavior of AA5754 Sheet Materials at Large Strains
(The American Society of Mechanical Engineers (ASME), 2008)The constitutive behavior of both direct-chill cast (DC) and continuous cast (CC) AA5754 sheet materials has been investigated up to large strains using a modified shear test. The modified shear ... -
Orientation and Path Dependence of Formability in the Stress- and the Extended Stress-Based Forming Limit Curves
(The American Society of Mechanical Engineers (ASME), 2008)This article analyzes the formability data sets for aluminum killed steel (, and , 1978, “ Effects of Strain Path Changes on the Formability of Sheet Metals,” Metall. Trans. A., 9, pp. ... -
Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels
(The American Society of Mechanical Engineers (ASME), 2008)Laser welding of advanced high strength steels for fabrication of tailor welded blanks is of increasing interest for continued improvements in vehicle performance and safety without an increase ... -
Analysis of Space Shuttle External Tank Spray-On Foam Insulation With Internal Pore Pressure
(The American Society of Mechanical Engineers (ASME), 2008)The polymer spray-on foam insulation used on NASA’s Space Shuttle external fuel tank is analyzed via the high-fidelity generalized method of cells micromechanical model. This model has been ...