Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2981-3000 of 3257
-
Growth Characteristics of a Fatigue Crack Approaching and Growing Beneath an Adhesively Bonded Doubler
(The American Society of Mechanical Engineers (ASME), 1978)The title problem was investigated experimentally and numerically. Aluminum adherends and two adhesives, AF-55 and AF-127, were utilized in the investigation. Each specimen had a crack introduced ... -
The Effect of Material Constitutive Models on Stress Wave Propagation Calculations
(The American Society of Mechanical Engineers (ASME), 1978)Material models which have been successfully used for describing experimental observations of stress wave propagation in metals, polymers, composites, and porous materials are used in a series ... -
Cyclic Plasticity for Nonproportional Paths: Part 1—Cyclic Hardening, Erasure of Memory, and Subsequent Strain Hardening Experiments
(The American Society of Mechanical Engineers (ASME), 1978)Extensive experiments were conducted on annealed copper under cyclic nonproportional strain histories. After cyclically stabilizing the material by uniaxial cycling, out-of-phase axial-shear strain ... -
Fatigue Crack Growth of Bondline Cracks in Structural Bonded Joints
(The American Society of Mechanical Engineers (ASME), 1978)Adhesive bondline crack growth data are presented from fatigue tests of structural bonded single-lap joints with initial bondline flaws. Crack growth was successfully monitored both ultrasonically ... -
Development of Random Fatigue Data for Adhesively Bonded and Weldbonded Structures Subjected to Dynamic Excitation
(The American Society of Mechanical Engineers (ASME), 1978)Prediction methods are being developed to determine the sonic fatigue life of various weldbonded and adhesively bonded aircraft structures when exposed to high intensity acoustic excitation. This ... -
The Influence of Material Variability on the Predicted Environmental Behavior of Composite Materials
(The American Society of Mechanical Engineers (ASME), 1978)The stresses and strains induced in a composite material when subjected to mechanical loads are shown to be strongly influenced by prior exposure to both temperature changes (e.g., cooldown ... -
Failure Analysis of an Adhesively Bonded Graphite Composite/Steel Scarf Joint
(The American Society of Mechanical Engineers (ASME), 1978)Recent studies on the use of graphite fiber-organic matrix composites in Naval and commercial high performance ships have demonstrated the potential for significant weight savings and corresponding ... -
A Parametric Study of Fatigue Crack Growth Behavior in Adhesively Bonded Metallic Structures
(The American Society of Mechanical Engineers (ASME), 1978)Problems of adherend cracks inadhesively bonded structures are considered in this paper. Two different methods of analysis, namely the finite element method and the integral equation approach, ... -
Spectrum Crack Growth in Adhesively Bonded Structure
(The American Society of Mechanical Engineers (ASME), 1978)A method is presented by which crack growth of damage tolerance type flaws can be predicted in adhesively bonded structure subjected to spectrum loading. The method accounts for a laminate ... -
Conference Report: Material Substitution: Availability, Energy and Environmental Factors
(The American Society of Mechanical Engineers (ASME), 1978) -
Fracture Analysis of Adhesively Bonded Cracked Panels
(The American Society of Mechanical Engineers (ASME), 1978)An analysis procedure is presented for predicting crack tip stress intensity factors, adhesive stiffener stresses and strains, and the residual strength of adhesively bonded stiffened panels ... -
The Effect of Adhesive Layers on the Fracture of Laminated Structures
(The American Society of Mechanical Engineers (ASME), 1978)In this paper the effect of the thickness and the elastic properties of the adhesive layers in laminated structures is considered. The structure is assumed to consist of two sets of periodically ... -
Fatigue Crack Propagation in 8- and 22-Layer 7075-T6 Aluminum Alloy Laminates
(The American Society of Mechanical Engineers (ASME), 1978)Rates of fatigue crack propagation have been determined for adhesively bonded 7075-T6 laminates having a crack divider geometry. Two lamina thicknesses were used, the resulting laminates having ... -
Constitutive Modeling of Elevated Temperature Stress Relaxation in Austenitic Stainless Steels
(The American Society of Mechanical Engineers (ASME), 1978) -
Developing Failure Criteria for Adhesive Joints Under Complex Loading
(The American Society of Mechanical Engineers (ASME), 1978)This paper describes an investigation of the failure behavior of bonded joints under a wide range of in-plane loading. Combinations of tension, shear, and bending loads were applied to bonded ... -
Adhesive Bond Stresses and Strains at Discontinuities and Cracks in Bonded Structures
(The American Society of Mechanical Engineers (ASME), 1978)This paper presents analysis procedures to be used for analyzing adhesively bonded structures containing cracks or discontinuities in the metal elements. The analyses are performed for a range ... -
Comparison of Dynamic Tear and Charpy-V-Notch Impact Properties of Plate Steels
(The American Society of Mechanical Engineers (ASME), 1978)The increasing interest in the Dynamic Tear (DT) test for use in measuring the fracture resistance of steels in both quality control and research testing, invites a comparison to the commonly ... -
Thermographic Determination of Fatigue Damage
(The American Society of Mechanical Engineers (ASME), 1978)The energy released due to hysteresis effects in cyclically loaded materials can be used to predict where fatigue cracks are likely to initiate and to determine the stage of fatigue life. In ... -
The Effect of Plastic Strain Followed by Aging on the Torsion Fatigue Resistance of Quenched and Tempered 4340 Steel
(The American Society of Mechanical Engineers (ASME), 1978) -
The Room Temperature and Elevated Temperature Fracture Toughness Response of Alloy A-286
(The American Society of Mechanical Engineers (ASME), 1978)The elastic-plastic fracture toughness (JIc ) response of precipitation strengthened Alloy A-286 has been evaluated by the multi-specimen R-curve technique at room temperature, 700 K (800°F) ...