Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2961-2980 of 3257
-
Effects of Stress Ratio and Hold-Time on Fatigue Crack Growth in Alloy 718
(The American Society of Mechanical Engineers (ASME), 1979)Crack growth rate da/dN in Alloy 718 at 650°C, compared on the conventional ΔK basis, increased with increase in R (Kmin /Kmax ) and also generally with inclusion of hold time at Kmax ... -
Creep Failure Criteria for High Temperature Alloys
(The American Society of Mechanical Engineers (ASME), 1979)The evolution of creep failure criteria is discussed from the early considerations of strain limits to avoid excessive deformation to the current concepts where rupture is used as the basic ... -
Combining Phenomenology and Physics in Describing the High Temperature Mechanical Behavior of Crystalline Solids
(The American Society of Mechanical Engineers (ASME), 1979)It is now possible to predict quantitatively the high temperature mechanical behavior of pure metals, solid solution alloys and dispersion hardened alloys, based on an understanding of a number ... -
An Engineering Approach for Cumulative Damage in Metals Under Creep Loading
(The American Society of Mechanical Engineers (ASME), 1979)A concept of cumulative damage is developed for an evaluation of the damage incurred under creep loading at high temperature. The damage is essentially stress-dependent and is a non-linear ... -
Rate Equations for Elevated Temperature Creep
(The American Society of Mechanical Engineers (ASME), 1979)Creep deformation is characterized in terms of temperature, the applied load and the resultant steady-state creep rate. A correlation is often sought to describe accelerated test data and to ... -
Creep of Metals and Plastics Under Combined Stresses, A Review
(The American Society of Mechanical Engineers (ASME), 1979)Prior research on creep of metals and plastics under combined stresses is reviewed. Recent and current research in this area are described. Emphasis of the review is on experimental investigations ... -
Techniques Developed for Elevated Temperature Fracture Toughness Testing of Irradiated Materials in Thin Sections
(The American Society of Mechanical Engineers (ASME), 1979)Large changes in strength and ductility of metals after irradiation are known to occur. The fracture toughness of irradiated metals, which is related to the combined strength and ductility of ... -
The Development of High Temperature Design Methods Based on Reference Stresses and Bounding Theorems
(The American Society of Mechanical Engineers (ASME), 1979)The paper summarizes some recent developments in the analysis of structures by use of bounding theorems and reference stress techniques. In many instances these techniques may be used by design ... -
An Investigation of Multi-Axial Creep Characteristics of Metals
(The American Society of Mechanical Engineers (ASME), 1979)Conventionally, uniaxial creep test data provide the designer of engineering components at elevated temperature with an assessment of the creep behavior of the metal with which he is concerned. ... -
Statistical Methods for Creep, Fatigue and Fracture Data Analysis
(The American Society of Mechanical Engineers (ASME), 1979)Statistical methods can play an important role in the proper collection and analysis of creep, fatigue and fracture data. This article deals with what statistics has to offer in this area. ... -
Developments in Parametric Methods for Handling Creep and Creep-Rupture Data
(The American Society of Mechanical Engineers (ASME), 1979)The development of parametric methods for handling creep and creep-rupture data is briefly reviewed. The applicability of such methods to handling creep strain and creep strain rate data is ... -
Viscoplasticity Based on Total Strain. The Modelling of Creep With Special Considerations of Initial Strain and Aging
(The American Society of Mechanical Engineers (ASME), 1979)A previously proposed theory is specialized for the uniaxial state of stress and its prediction for creep and relaxation is analyzed in detail. Constant true stress and constant load creep ... -
Effects of Nonlinear Stress-Strain Rate Relation on Deformation and Fracture of Materials in Creep Range
(The American Society of Mechanical Engineers (ASME), 1979)Fundamental and practical investigations on high-temperature strength of materials have made significant contributions to industrial development for the last twenty-five years. However, an additional ... -
Remaining Creep or Stress-Rupture Life Under Nonsteady Temperature and Stress
(The American Society of Mechanical Engineers (ASME), 1979)This paper presents a historical review of the assessment of remaining creep life for components operating under stress at elevated temperatures. Topics considered in this review include the ... -
A Quarter-Century of Progress in the Development of Correlation and Extrapolation Methods for Creep Rupture Data
(The American Society of Mechanical Engineers (ASME), 1979)A brief review is presented of developments in analysis of creep-rupture data, including Time-Temperature Parameters, the Minimum Commitment Method, and Successive Regression. The role of Dr. ... -
Robert M. Goldhoff 1920-1978
(The American Society of Mechanical Engineers (ASME), 1979) -
Creep Damage and the Remaining Life Concept
(The American Society of Mechanical Engineers (ASME), 1979)Creep damage is described in terms of both density changes, which measure the nucleation and growth of grain boundary voids, and also changes in mechanical properties. In both cases the damage ... -
Guest Editorial
(The American Society of Mechanical Engineers (ASME), 1978) -
Editorial
(The American Society of Mechanical Engineers (ASME), 1978) -
Cyclic Plasticity for Nonproportional Paths: Part 2—Comparison With Predictions of Three Incremental Plasticity Models
(The American Society of Mechanical Engineers (ASME), 1978)Experiments that demonstrate the basic quantitative and qualitative aspects of the cyclic plasticity of metals are presented in Part 1. Three incremental plasticity kinematic hardening models of ...