Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2641-2660 of 3257
-
Corrosion Fatigue Crack Propagation Behavior of a C-Mn-Cb Steel
(The American Society of Mechanical Engineers (ASME), 1984)The fatigue crack propagation properties of a C-Mn-Cb plate steel (SA633 Grade C) in a 3.5 percent NaCl solution have been evaluated for loading frequencies of 10, 1.0, and 0.1 Hertz. To ... -
A Critical Review of Mechanical Failure Criteria
(The American Society of Mechanical Engineers (ASME), 1984)Failure criteria for a wide range of situations where the main consideration is flow or fracture are reviewed. Some of the concepts are well known and in wide use while others are of ... -
Seizure Mechanism in Cold Extrusion and Forging
(The American Society of Mechanical Engineers (ASME), 1984)To examine the seizure mechanism in cold extrusion and forging, a bifurcating extrusion type friction testing machine has been manufactured by the authors. This friction testing method was devised ... -
Mean Stress Effects in Biaxial Fatigue of Inconel 718
(The American Society of Mechanical Engineers (ASME), 1984)Biaxial fatigue tests were conducted on Inconel 718 thin-walled tubular specimens to quantify the effect of mean stress. The specimens were loaded in combined tension and torsion in strain ... -
New Experiments on the Temperature Distribution in Drilling
(The American Society of Mechanical Engineers (ASME), 1984)Using metallographic and microhardness techniques, temperature distributions have been determined in twist drills. The methods rely on the fact that certain high speed steel materials exhibit ... -
Erratum: “Prediction of Fatigue Threshold of Notched Components” (Journal of Engineering Materials and Technology, 1984, 106, pp. 192–199)
(The American Society of Mechanical Engineers (ASME), 1984) -
Evaluation of Engineering Surfaces by Diffraction Pattern Analysis
(The American Society of Mechanical Engineers (ASME), 1984)This paper highlights a new, noncontact technique to assess the differences in surface characteristics of components machined by shaping, milling, turning, grinding processes. The method suggested ... -
The Contact Problem Studied by Pseudocaustics Formed at the Vicinity of the Contact Zone
(The American Society of Mechanical Engineers (ASME), 1984)The method of caustics is applied to formulate the normal and tangential stresses developed in the contact zone of two elastic bodies, and also for one elastic and the other plastic. The ... -
Creep Rupture of Metals—An Analytical Model
(The American Society of Mechanical Engineers (ASME), 1984)Introducing a special vectorial internal variable quantifying the density, distribution and orientation of planar microcracks and assuming the existence of a potential in the space of affinities ... -
A Large Deformation Plasticity Model With Rate Sensitivity and Thermal Softening
(The American Society of Mechanical Engineers (ASME), 1984)In this paper, a previously published small deformation constitutive model with rate sensitive plasticity and thermal softening is extended to large deformation. The extended model appears suitable ... -
Creep Experiments Under Nonproportional Loadings With Stress Reversals for 2618 Aluminum
(The American Society of Mechanical Engineers (ASME), 1984)Experiments on creep of 2618-T61 aluminum under nonproportional loading steps combined with shear stress reversals, are reported. Compared to previous work, the stress levels, under which ... -
Constitutive Modeling of Dissipative Solids for Postcritical Behavior and Fracture
(The American Society of Mechanical Engineers (ASME), 1984)The paper aims at the description of the postcritical behavior and fracture of dissipative solids during tensile test. The ductile fracture is understood as the final stage of the necking ... -
Variable Temperature Creep and Creep Recovery of 304 Stainless Steel
(The American Society of Mechanical Engineers (ASME), 1984)Creep and creep recovery data are reported for pure tension of 304 stainless steel under variable temperature between 593°C and 649°C. Varying temperature experiments involved multiple ... -
Continuum Foundations of Endochronic Plasticity
(The American Society of Mechanical Engineers (ASME), 1984)In this paper a number of issues are addressed. The proper measure of intrinsic time is shown to be the norm of the increment of the plastic strain tensor, if the memory path is a line ... -
Improved Constitutive Equations for Modeling Strain Softening—Part II: Predictions for Aluminum
(The American Society of Mechanical Engineers (ASME), 1984)The capabilities of a new deformation model, MATMOD-4V, are demonstrated by comparison of computer predictions against independent data for high purity aluminum. In particular, model predictions ... -
Improved Constitutive Equations for Modeling Strain Softening—Part I: Conceptual Development
(The American Society of Mechanical Engineers (ASME), 1984)A microstructurally based model of nonelastic deformation is proposed which is capable of predicting strain softening as well as a wide range of other deformation behaviors. The model, an ... -
The Hardening and Rate-Dependent Behavior of Fully Annealed AISI Type 304 Stainless Steel Under Biaxial In-Phase and Out-of-Phase Strain Cycling at Room Temperature
(The American Society of Mechanical Engineers (ASME), 1984)Thin-walled tubes were subjected to fully reversed strain-controlled axial (A), torsional (T), in-phase (I) and out-of-phase (O) loading. A computer controlled MTS axial-torsion servocontrolled ... -
An Experimental Investigation of Yield Surfaces and Loading Surfaces of Pure Aluminum With Stress-Controlled and Strain-Controlled Paths of Loading
(The American Society of Mechanical Engineers (ASME), 1984)Tension-torsion tests with a computer controlled servohydraulic testing machine are reported. Yield surfaces were obtained during a load controlled path, which includes combined stress creep, as ... -
Power-Formula Viscoplasticity, Its Modification and Some Applications
(The American Society of Mechanical Engineers (ASME), 1984)A power viscoplastic constitutive equation was first proposed by Bodner and Partom in 1972. This specific formula has its origin in the physical phenomenon of dislocation dynamics and due to ... -
Analysis of Stress Response to Various Strain-Paths in Axial-Torsional Deformation of Metals
(The American Society of Mechanical Engineers (ASME), 1984)The stress response to various axial-torsional strain paths is discussed. The modified endochronic plasticity theory, which is formulated based on plastic-strain is used for theoretical analysis. ...