Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2661-2680 of 3257
-
The Anisotropic Deformation of Yield Surfaces
(The American Society of Mechanical Engineers (ASME), 1984)Extensive experimental evidence indicates that yield surfaces exhibit significant anisotropic hardening. Subsequent yield surfaces are both translated and deformed in stress space. A viscoplasticity ... -
A Thermo-Viscoplastic Constitutive Equation Based on Hyperbolic-Shape Thermo-Activated Barriers
(The American Society of Mechanical Engineers (ASME), 1984)A thermo-viscoplastic constitutive equation is proposed on the basis of thermoactivated mechanism with a spectrum of hyperbolic-shape barriers, suitable for a wide range of strain rate and ... -
Plastic Response of Polycrystalline Metals Subjected to Complex Deformation History
(The American Society of Mechanical Engineers (ASME), 1984)We attempt to formulate the elasto-plastic constitutive equations which reflect the basic features of the microscopic mechanism of plastic deformation and at the same time remains sufficiently ... -
Microscale Plastic Inhomogeneities and Macroscopic Behavior of Single and Multiphase Materials
(The American Society of Mechanical Engineers (ASME), 1984) -
A Self-Consistent Analysis of the Stiffening Effect of Rigid Inclusions on a Power-Law Material
(The American Society of Mechanical Engineers (ASME), 1984)An approximate constitutive relation is derived for a power-law viscous material stiffened by rigid spherical inclusions using a differential self-consistent analysis. This approach consists of two ... -
A Physical Theory of Plasticity and Creep
(The American Society of Mechanical Engineers (ASME), 1984)In 1971, Lin showed a physical theory of plasticity which seems to represent the actual mechanism of plasticity better than other theories. Since then, much work has been done to improve this ... -
On the Microstructural Origin of Certain Inelastic Models
(The American Society of Mechanical Engineers (ASME), 1984)A unifying program modeling the evolution of microstructures and their effects on the macroscopic response of materials is outlined. The new physical assumption introduced is the distinction among ... -
Modeling of the Plastic Behavior of Inhomogeneous Media
(The American Society of Mechanical Engineers (ASME), 1984)The general method which work for the case of linear properties are taken as a pattern for the derivation of the local total strain rate field of an inhomogeneous material (such as a ... -
A Micromechanical Basis for Constitutive Equations With Internal State Variables
(The American Society of Mechanical Engineers (ASME), 1984)A micromechanical model based on the glide and interaction of dislocations is developed to rationalize some of the phenomenological features of inelastic deformation. An origin for an internal ... -
Transition of Plastic Behavior From Single Crystal to Polycrystal Under Pure Tension, and the Effect of Multislip
(The American Society of Mechanical Engineers (ASME), 1984)Based on a series representation the tensile stress-strain relation of a polycrystal is derived explicitly in terms of the plasticity of its constituent grains. This derivation assumes Taylor’s ... -
Material Response and Continuum Relations; or From Microscales to Macroscales
(The American Society of Mechanical Engineers (ASME), 1984)Brief qualitative assessments are presented of a few approaches to macroscopic stress-strain relations for structural metals, alloys, and composites and some remarks are made about fracture. ... -
Behavior of Soft Spheres During Impact by High-Speed Photography
(The American Society of Mechanical Engineers (ASME), 1983)Previously, it has been verified experimentally for durations of impact that the Hertz theory (the quasi-statical theory) holds during impact of spheres without any exception. However, no measurement ... -
Wave Propagation in the Split Hopkinson Pressure Bar
(The American Society of Mechanical Engineers (ASME), 1983)Elastic wave propagation in the split Hopkinson pressure bar (SHPB) is discussed with an emphasis on the origin and nature of the oscillations that often trail the leading edge of the pressure ... -
Effect of Materials on the Mechanism of Electric Discharge Machining (E.D.M.)
(The American Society of Mechanical Engineers (ASME), 1983)Electric Discharge Machining process is investigated both theoretically and experimentally to determine the effects of electrode materials on the machining performance. For this purpose a single ... -
A Study of the Friction and Wear of Cartridge and Free-Cutting Brass
(The American Society of Mechanical Engineers (ASME), 1983)Friction and wear experiments on brasses with and without lead particles are presented and compared. Quantitative results are given for the dimensions of the wear tracks and of the subsurface ... -
A Numerical Assessment of the Tolerance of Manual Pressure Vessel Cladding Repairs
(The American Society of Mechanical Engineers (ASME), 1983)A numerical method for the prediction of the distribution of heat affected zone (HAZ) microstructures for dissimilar metal combinations involving austenitic and nickel base electrodes is described. ... -
A Comparative Investigation of the Sliding Wear of Some FCC Metals
(The American Society of Mechanical Engineers (ASME), 1983)Experimental investigations of the friction and wear of four copper alloys and pure nickel are presented. Measurements of the shape and dimensions of the wear tracks and of the extent of ... -
Microstructural Development and Cracking Behavior of AISI 304 Stainless Steel Tested in Time Dependent Fatigue Modes
(The American Society of Mechanical Engineers (ASME), 1983)Transmission and scanning electron microscopy were used to study the substructural development, crack initiation and crack propagation of AISI 304 stainless steel tested in low-cycle fatigue with ... -
Effect of Prestrain at Elevated Temperature on the Fracture Behavior of High Strength Steels
(The American Society of Mechanical Engineers (ASME), 1983)It is well known that fracture initiation behavior is influenced by weld thermal straining. In the present report, attention is focused on the influence of weld thermal straining on the fracture ... -
Evaluation of Fracture Toughness (JIC) Using Single Specimen Fracture Test Augmented by Finite Element Analysis
(The American Society of Mechanical Engineers (ASME), 1983)Fracture toughness is evaluated using the combination of results from a single compact tension fracture test and computationally developed key-curves. The key-curves—a family of load-deflection ...