Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2581-2600 of 3257
-
Engineering with Rigid PVC
(The American Society of Mechanical Engineers (ASME), 1985) -
Prevention of Fracture of Cracked Steel Bars Using Laser: Part I—Laser Hardening
(The American Society of Mechanical Engineers (ASME), 1985)This paper investigates the effect of laser hardening on cracked steel specimens. After laser hardening around precracked shafts of SAE 1015 steel, rotary bending fatigue strength was determined. ... -
Computer-Aided Design of Polymers and Composites
(The American Society of Mechanical Engineers (ASME), 1985) -
Susceptibility of a Dual Phase Steel to Hydrogen Embrittlement
(The American Society of Mechanical Engineers (ASME), 1985)Dual phase steels are used in many applications for which electroplating is required. Hydrogen absorption and consequent loss of strength and ductility is therefore possible. Tensile tests and ... -
A Study on Fatigue Life Distribution of Butt-Welded Joints
(The American Society of Mechanical Engineers (ASME), 1985)To examine the statistical fatigue life properties of welded joints, fatigue tests were performed on a number of butt-welded specimens, in parallel with similar tests conducted on small specimens ... -
The Effect of Foam Filling Upon the Energy Absorption of Spot Welded Sheet Metal Tubes
(The American Society of Mechanical Engineers (ASME), 1985)The effect of shell material properties and foam density on the energy absorption of spot welded, square section sheet steel tubes was studied. It was found that as the sheet material tensile ... -
Effect of Coal Liquefaction Solvents on Fatigue Crack Initiation in 2 1/4 Cr-1 Mo Steel and 316L Stainless Steel
(The American Society of Mechanical Engineers (ASME), 1985)Blunt notch fatigue crack initiation tests were carried out on 2.25 Cr – 1 Mo steel and 316L stainless steel in room temperature air and in the process solvent from the Wilsonville, Alabama ... -
Fracture Toughness of Irradiated HT-9 Weld Metal
(The American Society of Mechanical Engineers (ASME), 1985)Fracture toughness tests were performed at 93, 205, 316, and 427°C using electropotential techniques on HT-9 weld material irradiated to a fluence of 2.35 × 1022 n/cm2 (E> 0.1 MeV) ... -
In-Service Degradation of Toughness of Steam Turbine Rotors
(The American Society of Mechanical Engineers (ASME), 1985)The toughness of steam turbine rotors degrades with time of service exposure in the range of 340°–540°C. There is a need to estimate the toughness degradation that has occurred in ... -
An Experimental Study of the Structure of Constitutive Equations for Nonproportional Cyclic Plasticity
(The American Society of Mechanical Engineers (ASME), 1985)Three type 304 stainless steel specimens of the same geometry were subjected to complex, cyclic axial-torsional histories characterized by varying degrees of non-proportionality of straining. All ... -
Deformations and Stresses in Butt-Welding of Large Plates With Special Reference to the Mechanical Material Properties
(The American Society of Mechanical Engineers (ASME), 1985)Simulation of automatic butt-welding of large plates was investigated. Two different steels were considered. The plates were tack-welded before the butt-welding. The simulation includes the ... -
Dynamic Emission of Dislocations From a Moving Crack
(The American Society of Mechanical Engineers (ASME), 1985)The emission of dislocations from a propagating crack in the mode II or III situations is studied by computer simulation. While the crack is moving the steady state number of dislocations is ... -
Effects of Prestrain With Strain Gradient Present on Sheet Metal Formability
(The American Society of Mechanical Engineers (ASME), 1985)In this investigation, two double-stage forming processes are used to study the effects of prestrain on sheet metal formability. The processes chosen are the bulge test and the plunger test ... -
Plastic Deformation Behavior of Type 316 Stainless Steel Subject to Out-of-Phase Strain Cycles
(The American Society of Mechanical Engineers (ASME), 1985)To elucidate the plastic behavior of metals under out-of-phase strain cycles, a series of experiments was performed on square strain trajectories in a vector space of deviatoric strain by ... -
Limit Strains for Thin-Walled Tubes With Initial Thickness Inhomogeneity
(The American Society of Mechanical Engineers (ASME), 1985)Limiting strains during tube bulging have been investigated for long tubes subjected to an internal pressure together with an external axial force. A strain instability criterion which takes ... -
On an Improved Time Integration Scheme for Stiff Constitutive Models of Inelastic Deformation
(The American Society of Mechanical Engineers (ASME), 1985)For the time-integration of stiff constitutive models of inelastic deformation, the explicit (one step Euler) integration scheme can be used provided the time step size is closely monitored and ... -
Stress Concentrations for Filled and Unfilled Closely Spaced Cylindrical Defects
(The American Society of Mechanical Engineers (ASME), 1985)All real materials contain defects which significantly reduce the fracture stress of brittle materials. It has been proposed by Griffith [3] that brittle fracture occurs when the maximum intensified ... -
A Generalized Method for Estimating Multiaxial Elastic-Plastic Notch Stresses and Strains, Part 2: Application and General Discussion
(The American Society of Mechanical Engineers (ASME), 1985)The approximation method presented in a previous paper is applied to a round bar with a circumferential notch under tensile load and to a thick-walled cylinder under internal pressure. By ... -
Analysis of Upsetting With Profiling Dies
(The American Society of Mechanical Engineers (ASME), 1985)The stress analysis in the deformation zone in upsetting of a workhardening material by half-cylindrical die is presented. The load and average pressure as a function of die stroke were ... -
A Generalized Method for Estimating Multiaxial Elastic-Plastic Notch Stresses and Strains, Part 1: Theory
(The American Society of Mechanical Engineers (ASME), 1985)The well known approximation formulas valid for uniaxial notch stresses are extended to multiaxial stress states in order to establish a load - equivalent notch stress and strain relationship. ...