Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2221-2240 of 3257
-
Cumulative Damage in Composites
(The American Society of Mechanical Engineers (ASME), 1990)The problem of cumulative fatigue damage in composites is analyzed based upon the development of a phenomenological damage model. In this modeling, a damage function is defined based on the ... -
Handbook of Ion Beam Processing Technology: Principles, Deposition, Film Modification, and Synthesis
(The American Society of Mechanical Engineers (ASME), 1990) -
Study on the Grinding Mechanism of Glass Fiber Reinforced Plastics
(The American Society of Mechanical Engineers (ASME), 1990)In order to clarify the grinding mechanism of polymer matrix composites, special test specimens were provided. The test specimen is such one that glass yarns are unidirectionally embedded at ... -
Strain Energy Release Rate Characterization of Structural Adhesive Bonds to Primer Electrodeposited on Steel
(The American Society of Mechanical Engineers (ASME), 1990)Structural applications of adhesive bonding have been increasing in recent years due to improvements in the types of adhesives available and in improved knowledge of bondline procedures. Consequently, ... -
Delamination Effects on Composite Shells
(The American Society of Mechanical Engineers (ASME), 1990)An analytical investigation was performed to study the effect of delamination on the response of cylindrical composite shells subjected to external loadings. It was of particular interest to ... -
An Axial-Torsional Extensometer for Finite Deformation
(The American Society of Mechanical Engineers (ASME), 1990)An axial-torsional extensometer has been designed, constructed and tested. This extensometer is suitable for use in the experimental determination of multiaxial plastic deformation and determination ... -
Unrecoverable Strain Hardening in Torsionally Strained OFHC Copper
(The American Society of Mechanical Engineers (ASME), 1990)This paper investigates the recoverable and unrecoverable components of strain hardening in OFHC copper tubing subjected to torsional strain. Individual hardening components are classified and the ... -
Texture Development During Wire Drawing
(The American Society of Mechanical Engineers (ASME), 1990)The development of deformation induced anisotropy in wire drawing operations is modeled with a finite element formulation that incorporates a polycrystalline plasticity model to describe the metal ... -
A Unified Constitutive Model for the Inelastic Uniaxial Response of Rene’ 80 at Temperatures Between 538C and 982C
(The American Society of Mechanical Engineers (ASME), 1990)The objective of this research is to develop a constitutive equation for the uniaxial monotonic and cyclic response of Rene’80 between the temperatures of 538C and 982C. The constitutive equation ... -
Physical Modeling of Ductile Fracture During Metalforming Process
(The American Society of Mechanical Engineers (ASME), 1990)The process of ductile fracture during metalforming was modeled by deforming plasticine specimens which contained steel-wire segments to simulate the inclusions in a fully plastic matrix. Due to ... -
The Effect of Temperature on the Material Damping of Graphite/Epoxy Composites in a Simulated Space Environment
(The American Society of Mechanical Engineers (ASME), 1990)An experimental method for measuring material damping is described, which employs a free-free beam lightly supported at the nodes. A thermal space environment is simulated by measuring the ... -
Dispersion Investigation in the Split Hopkinson Pressure Bar
(The American Society of Mechanical Engineers (ASME), 1990)Dispersion of an elastic wave propagating in a 76.2-mm-diameter (3 in.) Split Hopkinson Pressure Bar system was investigated with two consecutive pulses recorded in the transmitter bar. Assuming ... -
Bodner-Partom Constitutive Model and Nonlinear Finite Element Analysis
(The American Society of Mechanical Engineers (ASME), 1990)In this paper, results from an elastic-plastic finite-element model incorporating the Bodner-Partom model of nonlinear time-dependent material behavior are presented. The parameters in the constitutive ... -
Quantification of Numerical Stiffness for a Unified Viscoplastic Constitutive Model
(The American Society of Mechanical Engineers (ASME), 1990)Here the question of numerical stiffness pertaining to a unified viscoplastic constitutive model is examined. The viewpoint maintained throughout this study is the state variable approach. Stiffness ... -
Acoustoelasticity in Layered Composites
(The American Society of Mechanical Engineers (ASME), 1990)Acoustoelasticity is a nondestructive technique used for determining applied and residual stresses in structural materials. It is based on the fact that as a material undergoes deformation, the ... -
Application of the First Higher-Order (M21) Mode Rayleigh Wave to the Inspection of Stainless Steel Overlays
(The American Society of Mechanical Engineers (ASME), 1990)Efficient inspection of stainless steel overlays appears to present a particularly challenging problem due to the anisotropy that is characteristic of that material. An improved inspection technique ... -
Dynamic Distribution of Displacement and Stress Considerations in the Ultrasonic Immersion Nondestructive Evaluation of Multilayered Plates
(The American Society of Mechanical Engineers (ASME), 1990)A unified theoretical treatment is presented for the calculation of displacements and stresses within multilayered media subjected to incident ultrasonic waves. The wave is supposed to be incident ... -
Three-Dimensional Simulation of Open-Die Press Forging
(The American Society of Mechanical Engineers (ASME), 1990)A three-dimensional, large deformation elastic-plastic finite element model is used to study the distribution of internal stresses and strains which occur during the forging process. Simulations ... -
High Temperature Creep Damage Under Biaxial Loading—Part II: Model and Simulations
(The American Society of Mechanical Engineers (ASME), 1990)The inadequacies, in describing the high temperature creep damage of two industrial alloys (Part I) with a model where the anisotropic damage variable D depends only on time have been pointed ... -
Numerical Analysis of a Strip With a Hole Subjected to Cyclic Loading
(The American Society of Mechanical Engineers (ASME), 1990)This paper deals with the problem of a strip with a hole subjected to cyclic loading at the ends. For the numerical analysis, a constitutive model incorporating the motion of the center of ...