Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1881-1900 of 3257
-
Scaling of Quasi-Brittle Fracture and the Fractal Question
(The American Society of Mechanical Engineers (ASME), 1995)The paper represents an extended text of a lecture presenting a review of recent results on scaling of failure in structures made of quasibrittle materials, characterized by a large fracture ... -
Mixed Mode Fracture Toughness of Engineering Materials
(The American Society of Mechanical Engineers (ASME), 1995)The effect of mixed mode loading on the fracture toughness of engineering materials is rationalized in terms of the operative fracture mechanism as well as the deformation field ahead of the ... -
From Micro- to Macro-Plasticity: The Scale Invariance Approach
(The American Society of Mechanical Engineers (ASME), 1995)An account of recent contributions to the theory of plasticity advanced by the author and his co-workers is provided with emphasis on deformation-induced anisotropy and texture formation. For ... -
Fractography of an Axle Which Broke Under Combined Bending Impact and Torsion
(The American Society of Mechanical Engineers (ASME), 1994)An automobile rear axle broke at the differential end when the vehicle collided with a tree at about 35 m.p.h. The fracture surfaces exhibited features characteristic of both bending impact ... -
Fabrication of W-1%ThO2 Reinforced Fe-25Cr-8Al-0.5Y Superalloy Matrix Composite
(The American Society of Mechanical Engineers (ASME), 1994)Four different aligned W-1%ThO2 reinforced Fe-25Cr-8Al-0.5Y matrix fiber reinforced superalloy [FRS] material billets were produced by powder metallurgical processing. Three materials differed only ... -
Bending Analysis of Laminated Composite Box Beams
(The American Society of Mechanical Engineers (ASME), 1994)Box beams are widely used in weight reduction structures such as aircraft wings. The use of composite box beams further reduces the weight factor for such structures with the same deflection ... -
Thermal Fatigue of Composites: Ultrasonic and SEM Evaluations
(The American Society of Mechanical Engineers (ASME), 1994)Results are presented on the evaluation of thermal fatigue in three fiber reinforced polymer composites, using ultrasonic techniques and scanning electron microscopy. The composites examined were ... -
A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage
(The American Society of Mechanical Engineers (ASME), 1994)Gurson’s mixed hardening plasticity model (which takes into account the progressive damage due to void nucleation and growth of an initially dense material), with strain and stress-controlled ... -
Analysis of Plastic Behavior to Cyclically Uniaxial Tests Using an Endochronic Approach
(The American Society of Mechanical Engineers (ASME), 1994)This paper is devoted to the modeling of metallic materials behaving path dependent strain/loading hardening using endochronic theory. Characteristics of the model include the description of the ... -
On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy
(The American Society of Mechanical Engineers (ASME), 1994)The isotropic hardening is known to play an effective role in the overhardening of materials under nonproportional cyclic loading. However, the behavior of the two states of Waspaloy (namely ... -
The Combined Effects of Notches and Microstructure on the Performance of Medium Carbon Steel Breakaway Couplings
(The American Society of Mechanical Engineers (ASME), 1994)Combined effects of notches and microstructure on the structural performance of medium carbon steel breakaway couplings were discussed. Property troughs commonly associated with tempered martensite ... -
Fatigue Behavior of a 22Cr-20Ni-18Co-Fe Alloy at Elevated Temperatures
(The American Society of Mechanical Engineers (ASME), 1994)An experimental investigation was conducted on Haynes Alloy 556 to study the fatigue behavior of the material at elevated temperatures. Fatigue tests were run at constant temperatures ranging ... -
Influence of Environment and Creep on Fatigue Crack Growth in a High Temperature Aluminum Alloy 8009
(The American Society of Mechanical Engineers (ASME), 1994)Frequency effects on fatigue crack growth rates are examined in aluminum alloy 8009 in sheet and extruded product forms. The investigations show that frequency effects on the fatigue crack ... -
Cumulative Damage Behavior of Anisotropic Al-6061-T6 as a Function of Axial-Torsional Loading Mode Sequence
(The American Society of Mechanical Engineers (ASME), 1994)Two types of low cycle fatigue tests were conducted along two principal orthotropic directions of an orthotropic Al-6061-T6 plate in strain control at room temperature: (1) reference fatigue ... -
Effective Thermomechanical Behavior of Plain-Weave Fabric-Reinforced Composites Using Homogenization Theory
(The American Society of Mechanical Engineers (ASME), 1994)A micromechanical analysis is presented to obtain the effective macroscale orthotropic thermomechanical behavior of plain-weave fabric reinforced laminated composites based on a two-scale asymptotic ... -
High Temperature Multiaxial Low Cycle Fatigue of Cruciform Specimen
(The American Society of Mechanical Engineers (ASME), 1994)This paper describes high temperature multiaxial low cycle fatigue lives of type SUS304 stainless steel and 1Cr-1Mo-1/4V steel cruciform specimens at 923K and 823K in air. Strain controlled ... -
Boundary Element Implementation of a Rough Crack Constitutive Model
(The American Society of Mechanical Engineers (ASME), 1994)The boundary element application of a micromechanics based constitutive model for rough cracks previously developed by the authors is presented. This constitutive model considers the off-diagonal ... -
Material Property Studies of Two High-Pressure Turbine Rotors for Remaining Life Assessment
(The American Society of Mechanical Engineers (ASME), 1994)A remaining life assessment study was performed on two no-bore HP rotors after 169,000 hours of operation. These rotors were manufactured from 1CrMoV (ASTM A470, Class 8) steel. Southwest ... -
Analysis and Compression Testing of 2024 and 8009 Aluminum Alloy Zee-Stiffened Panels
(The American Society of Mechanical Engineers (ASME), 1994)Zee-stiffened compression test panels, fabricated with dispersion-strengthened, high-temperature 8009 aluminum alloy sheet, were evaluated to determine the alloy’s feasibility for compression-critical ... -
A Model for Friction in Metal Forming
(The American Society of Mechanical Engineers (ASME), 1994)The role of hydrostatic stress on the plastic deformation of asperities is examined in the context of the adhesion theory of friction. A lower bound analysis gives the frictional shear strength ...