Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1861-1880 of 3257
-
Micromechanics Modeling of Electronic Composites
(The American Society of Mechanical Engineers (ASME), 1995)The microstructure-macroproperty relation of electronic composites is studied by use of the Eshelby’s method which has been extended to treat the inclusion problem of thermal and electromagnetic ... -
Experimental Evidence of Temperature Path Independence in the Polycrystalline Alloy Ni3AI
(The American Society of Mechanical Engineers (ASME), 1995)The results from a series of elevated temperature prestrain experiments on a hypostoichiometric polycrstalline Ni3 Al are presented. Experiments were conducted to examine the deformation characteristic ... -
Flow Instability in the Torsional Straining of Commercially Pure Titanium
(The American Society of Mechanical Engineers (ASME), 1995)Analysis of the phenomenon of adiabatic flow instability during the torsional straining of CP titanium has been made and the instability shear strain predicted. The constitutive equation for ... -
An Investigation of Transient Creep by Means of Endochronic Viscoplasticity and Experiment
(The American Society of Mechanical Engineers (ASME), 1995)Creep of metals has been investigated by means of the endochronic constitutive equation. This is a unified approach. Transient creep tests have been conducted on 304 stainless-steel specimens ... -
Effect of State of Stress on Compression Failure in Carbon/Epoxy Laminates
(The American Society of Mechanical Engineers (ASME), 1995)Compression loadings in thick composites can in some cases lead to three-dimensional states of stress with a compressive mean stress. A model is developed in the present work that attempts to ... -
Modeling and Numerical Analysis of Compression Molding of Three-Dimensional Thin Parts With Curing Process
(The American Society of Mechanical Engineers (ASME), 1995)A numerical modeling is proposed for the simulation of flow, heat transfer, and reaction kinetics during the compression molding of three-dimensional thin parts. A nonisothermal, non-Newtonian ... -
Which Elasticity Tensors are Realizable?
(The American Society of Mechanical Engineers (ASME), 1995)It is shown that any given positive definite fourth order tensor satisfying the usual symmetries of elasticity tensors can be realized as the effective elasticity tensor of a two-phase composite ... -
Fatigue Life Prediction in Titanium Matrix Composites
(The American Society of Mechanical Engineers (ASME), 1995)Methods used for life prediction of titanium matrix composites under isothermal and thermomechanical (TMF) fatigue are reviewed. Models containing a single parameter are shown to have applicability ... -
Modeling of High Homologous Temperature Deformation Behavior Using the Viscoplasticity Theory Based on Overstress (VBO): Part I— Creep and Tensile Behavior
(The American Society of Mechanical Engineers (ASME), 1995)The viscoplasticity theory based on overstress (VBO) is a state variable theory without a yield surface and without loading/unloading conditions. It contains two tensor valued state variables, ... -
A Method for the Analysis of the Growth of Short Fatigue Cracks
(The American Society of Mechanical Engineers (ASME), 1995)A method for the analysis of the fatigue crack growth rate for short cracks has been developed and is applied to the case of fatigue crack growth of short surface cracks in a 1045 carbon ... -
Fatigue-Life Prediction Methodology Using a Crack-Closure Model
(The American Society of Mechanical Engineers (ASME), 1995)This paper reviews the capabilities of a plasticity-induced crack-closure model and life-prediction code, FASTRAN, to predict fatigue lives of metallic materials using small-crack theory. Crack-tip ... -
From Instability and Time Dependence on the Microscale to Stability and Time Independence on the Macroscale
(The American Society of Mechanical Engineers (ASME), 1995)The quasistatic inelastic deformation of ductile structural metals observed on the macroscale reflects a diversity of dynamic inelastic effects on the microscale. The generation, motion, and ... -
Elastic Properties of Particle-Occlusion Composites: Measurements and Modeling
(The American Society of Mechanical Engineers (ASME), 1995)We review some of our recent studies on the effective elastic constants of composites where the occluded phase is spherical or spheroidal (oblate or prolate). From constituent properties and ... -
Residual Stresses and Fracture Mechanics
(The American Society of Mechanical Engineers (ASME), 1995)The first part of the paper discusses two problems in which the role of residual stresses may be treated using the procedures of fracture mechanics. One is the significant degradation of the ... -
Universal Bounds for Overall Properties of Linear and Nonlinear Heterogeneous Solids
(The American Society of Mechanical Engineers (ASME), 1995)For a sample of a general heterogeneous nonlinearly elastic material, it is shown that, among all consistent boundary data which yield the same overall average strain (stress), the strain ... -
Mechanistic Approach for Creep-Fatigue Evaluation of 9Cr-1Mo-V-Nb Steel
(The American Society of Mechanical Engineers (ASME), 1995)A mechanistic model was developed to describe the creep-fatigue interaction of 9Cr-1Mo-V-Nb steel based on a damage mechanics approach. The model assumes that each of the fatigue and creep ... -
Laminate Delamination Due to Thermal Gradients
(The American Society of Mechanical Engineers (ASME), 1995)Flaw-induced delamination of orthotropic laminates subject to through-thickness temperature gradients is analyzed. A crack-like flaw impedes heat flow through the laminate, producing thermal stresses ... -
Effective Elastic Constants of Superlattice Films Measured by Line-Focus Acoustic Microscopy
(The American Society of Mechanical Engineers (ASME), 1995)The effective elastic constants of single-crystal nitride superlattice films have been determined by calculation and by measurement methods. The calculation method uses formulas to calculate the ... -
Natural Strain
(The American Society of Mechanical Engineers (ASME), 1995)The purpose of this paper is to present a consistent and thorough development of the strain and strain-rate measures affiliated with Hencky. Natural measures for strain and strain-rate, as I ... -
Materials Division Diamond Jubilee Special Issue
(The American Society of Mechanical Engineers (ASME), 1995)