Now showing items 1261-1280 of 3257

    • Editorial 

      Huseyin Sehitoglu (The American Society of Mechanical Engineers (ASME), 2003)
      I am very pleased to succeed Prof. David McDowell as the new Editor of Transactions of the ASME, Journal of Engineering Materials and Technology. I would like to thank David for his strong ...
    • Creep Behavior and Deformation Mechanism Map of Sn-Pb Eutectic Solder Alloy 

      X. Q. Shi; H. L. J. Pang; Z. P. Wang; Q. J. Yang (The American Society of Mechanical Engineers (ASME), 2003)
      In this study, a large number of creep tests were carried out using miniature specimens in order to investigate the creep behavior of 63Sn/37Pb eutectic solder alloy over a wide temperature ...
    • Interaction of Phase Transformation and Diffusion in Steels 

      E. Gamsjäger; F. D. Fischer; J. Svoboda (The American Society of Mechanical Engineers (ASME), 2003)
      During continuous casting low alloy steels undergo a proeutectoid γ (austenite)/α (ferrite) transformation at temperatures of about 1000 K and above. The continuous rearrangement of the iron-lattice ...
    • Numerical Simulations of the Creep Deformation of MMCs in 4-Point Bending Mode 

      Thomas Daxner; Javier Segurado; Heinz E. Pettermann; Franz G. Rammerstorfer (The American Society of Mechanical Engineers (ASME), 2003)
      The 4-point bending test is a widely used method to determine material parameters. No commonly accepted evaluation methodology is available for materials showing non-linear deformation mechanisms. ...
    • On the Analytical Solution of Pullout Phenomena in Textile Reinforced Concrete 

      B. Zastrau; M. Richter; I. Lepenies (The American Society of Mechanical Engineers (ASME), 2003)
      The bond between the textile reinforcement and the finegrade concrete (cementitious matrix) is essential for the structural behavior of textile reinforced concrete. The analysis of the bond ...
    • K Variations and Anisotropy: Microstructure Effect and Numerical Predictions 

      Xu-Dong Li (The American Society of Mechanical Engineers (ASME), 2003)
      Computer experiments were performed on simulated polycrystalline material samples that possess locally anisotropic microstructures to investigate stress intensity factor (K) variations and anisotropy ...
    • Plastic Deformation of a Perforated Sheet With Non-Uniform Circular Holes Along the Thickness Direction 

      Fuh-Kuo Chen; Yi-Che Lee (The American Society of Mechanical Engineers (ASME), 2003)
      For a perforated sheet with circular holes, used in shadow masks, the diameter of the circular hole varies through the thickness, and the non-uniform circular holes are arranged in a triangular ...
    • Chip Formation in Cellular Materials 

      Ralf Laternser; Hans-Peter Gänser; Lars Taenzer; Alexander Hartmaier (The American Society of Mechanical Engineers (ASME), 2003)
      The constitutive behavior of cellular materials like wood, especially with respect to the plastic and fracture mechanical properties, differs significantly from that of “classical” materials like ...
    • The Convergence of a DFT-Algorithm for Solution of Stress-Strain Problems in Composite Mechanics 

      C. M. Brown; W. Dreyer; W. H. Müller (The American Society of Mechanical Engineers (ASME), 2003)
      This paper addresses the convergence characteristics of an iterative solution scheme of the Neumann-type useful for obtaining homogenized mechanical material properties from a representative volume ...
    • Thermal Loading of Duplex Steels 

      Vadim V. Silberschmidt; Ewald A. Werner; Christof Messner (The American Society of Mechanical Engineers (ASME), 2003)
      Ferritic-austenitic duplex steels demonstrate a complex deformational behavior even in the absence of mechanical loads. Purely thermal cycling in the temperature interval from 20°C to 900°C ...
    • Plastic Collapse of Cylinders Under Constrained Conditions 

      A. Abdul-Latif; K. Nesnas (The American Society of Mechanical Engineers (ASME), 2003)
      This paper deals with an experimental methodology of the large deformation of cylinders under constrained sides and end conditions. A specific arrangement of two geometrically identical cylinders ...
    • Transmission and Polarization of Elastic Waves in Irregular Structures 

      S. B. Platts; R. C. McPhedran; A. B. Movchan; N. V. Movchan (The American Society of Mechanical Engineers (ASME), 2003)
      Propagation of elastic waves in an infinite elastic medium containing a finite array of circular cylindrical cavities is considered. It is assumed that the cavities are equally spaced within ...
    • Computational and Experimental Mechanics of Advanced Materials 

      Ewald A. Werner; Vadim V. Silberschmidt; Professor of Mechanics of Materials; Helmut J. Böhm (The American Society of Mechanical Engineers (ASME), 2003)
      This special issue of the Journal of Engineering Materials and Technology contains a number of papers in the field of computational and experimental mechanics of advanced materials. Some of the ...
    • Imperfect Interfaces and Discrete Lattice Structures 

      A. B. Movchan (The American Society of Mechanical Engineers (ASME), 2003)
      We propose a model where a lattice structure is used within an interface layer of finite thickness. An evolution problem is set and studied to analyze the structural changes within the interface ...
    • Transformation Textures in Unstable Austenitic Steel 

      R. Kubler; M. Berveiller; M. Cherkaoui; K. Inal (The American Society of Mechanical Engineers (ASME), 2003)
      During the martensitic transformation in elastic-plastic materials, the local transformation strain as well as the plastic flow inside austenite are strongly related with the crystallographic ...
    • Numerical Simulation of Residual Stresses in a Spot Welded Joint 

      Xin Long; Sanjeev K. Khanna (The American Society of Mechanical Engineers (ASME), 2003)
      An incremental and thermal-electro-mechanical coupled finite element model has been presented in this study for predicting residual stress distribution in a spot welded steel joint. Approximate ...
    • Dynamic Fracture Toughness and Charpy Transition Properties of a Service-Exposed 2.25Cr-1Mo Reheater Header Pipe 

      P. R. Sreenivasan; G. Bandyopadhyay; C. G. Shastry; M. D. Mathew; K. Bhanu Sankara Rao; S. L. Mannan (The American Society of Mechanical Engineers (ASME), 2003)
      Residual life analysis of power plant components like boiler tubes, superheater outlet headers, reheater headers, steam pipes, etc., is important for life extension and avoidance of catastrophic ...
    • Development of Finite Element Techniques for Three-Dimensional Analyses of Thermo-Piezoelectric Materials 

      Fulin Shang; Meinhard Kuna; Matthias Scherzer (The American Society of Mechanical Engineers (ASME), 2003)
      The development and application of smart structures and smart composite materials require efficient numerical tools to analyze the thermo-piezoelectric behavior and stress state. In this paper, ...
    • Constitutive Modeling of Cold Compaction and Sintering of Hardmetal 

      Lennart Mähler; Kenneth Runesson (The American Society of Mechanical Engineers (ASME), 2003)
      Constitutive modeling and related numerical issues in conjunction with the macroscopic analysis and simulation of cold compaction and subsequent solid phase sintering of hard-metal are discussed. ...
    • Determination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests 

      Y. C. Zhou; T. Hashida; C. Y. Jian (The American Society of Mechanical Engineers (ASME), 2003)
      The theoretical model for the blister test method was used to analyze the interface fracture toughness of zirconia coating deposited on an SUS304 stainless steel substrate by a plasma-spraying ...