Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1241-1260 of 3257
-
Effect of Geometry and Materials on Residual Stress Measurement in Thin Films by Using the Focused Ion Beam
(The American Society of Mechanical Engineers (ASME), 2004)Recently, a new method for residual stress measurement in thin films by using the focused ion beam (FIB) has been proposed by the authors. It is based on the combined capability of the FIB ... -
Assessment of Tensile Residual Stress Mitigation in Alloy 22 Welds Due to Laser Peening
(The American Society of Mechanical Engineers (ASME), 2004)This paper examines the effects of laser peening on Alloy 22 (UNS N06022), which is the proposed material for use as the outer layer on the spent-fuel nuclear waste canisters to be stored ... -
Erratum: “A Simplified Approach to Estimate Limiting Drawing Ratio and Maximum Drawing Load in Cup Drawing” [Journal of Engineering Materials and Technology, 2004, 126(1) pp. 116–122]
(The American Society of Mechanical Engineers (ASME), 2004)The correct form of Eq. (16) is as follows:Display FormulaR0r1c=LDR=e(1+n)[(2 fe−n−e−μπ/2t0/rd)(1+R)/2−4μ(1+2R)/[2(1+R)]]+e2n(1+R)/2−1 -
Electron Transport in Deformed Carbon Nanotubes
(The American Society of Mechanical Engineers (ASME), 2004)Carbon nanotubes are a material system of increasing technological importance with superb mechanical and electrical properties. It is well known that depending on details of atomic structure, ... -
Fracture Toughness of Highly Ordered Carbon Nanotube/Alumina Nanocomposites
(The American Society of Mechanical Engineers (ASME), 2004)The fracture toughness of highly-ordered multi-wall carbon-nanotube-reinforced alumina composites is calculated from experimental data on nanoindentation cracking. A combined analytical and numerical ... -
On Identification of Material Models When Nonrepeatability of Test Data is Present: Application to Textile Composites
(The American Society of Mechanical Engineers (ASME), 2004)Engineering test data occasionally violate assumptions underlying standard material model identification. Consequently, one has to apply appropriate remedies with respect to each violation to enhance ... -
Static and Dynamic Analysis of Carbon Nanotube-Based Switches
(The American Society of Mechanical Engineers (ASME), 2004)In this paper, we report on molecular dynamics (MD), continuum (based on linear and nonlinear beam theories) and combined molecular dynamics/continuum simulation of carbon nanotube based ... -
Deformation Mechanisms of Very Long Single-Wall Carbon Nanotubes Subject to Compressive Loading
(The American Society of Mechanical Engineers (ASME), 2004)We report atomistic studies of single-wall carbon nanotubes with very large aspect ratios subject to compressive loading. These long tubes display significantly different mechanical behavior than ... -
Bilinear Behavior in Nano and Microindentation Tests of fcc Polycrystalline Materials
(The American Society of Mechanical Engineers (ASME), 2004)α-brass and aluminum microhardness and deep nanoindentation data when fitted to the Taylor dislocation-hardening (TDH) model produced a straight-line behavior consistent with the model. Literature ... -
Equivalent Time Temperature Model for Physical Aging and Temperature Effects on Polymer Creep and Relaxation
(The American Society of Mechanical Engineers (ASME), 2004)The equivalent time temperature method (ETT) is a novel extension of the equivalent time method. ETT is developed in this work to deal with time-temperature shifting of long-term polymer and ... -
Creep Behavior of Al-Si Die-Cast Alloys
(The American Society of Mechanical Engineers (ASME), 2004)Commercial, aluminum die-cast alloys are subject to long-term stresses leading to viscoelastic material responses resulting in inefficient engine operation and failure. Constant load creep tests ... -
Measurement and Microstructural Evaluation of Creep-Induced Changes in Magnetic Properties of a 410 Stainless Steel
(The American Society of Mechanical Engineers (ASME), 2004)There is a compelling desire by power generating plants to continue running existing stations and components for several more years, despite many of them have surpassed their design service ... -
Thermo-Mechanical Modeling of Hot Forging Process
(The American Society of Mechanical Engineers (ASME), 2004)In the present study, a mathematical model has been developed to evaluate temperature and strain fields as well as dynamic and static microstructural changes during the nonisothermal forging ... -
A Slip-Based Model for Strength Evolution During Cyclic Loading
(The American Society of Mechanical Engineers (ASME), 2004)Motivated by the strong dependence of strain-hardening processes on slip system activity, a slip system hardening formulation that explicitly employs accumulated slip system shear strains and net ... -
Tensile Deformation and Rotating-Bending Fatigue Properties of a Highelastic Thin Wire, a Superelastic Thin Wire, and a Superelastic Thin Tube of NiTi Alloys
(The American Society of Mechanical Engineers (ASME), 2004)The tensile deformation and rotating-bending fatigue properties of a highelastic thin wire, a superelastic thin wire and a superelastic thin tube, all made of NiTi alloys, were investigated ... -
Prediction of Brinell Hardness Distribution in Cold Formed Parts
(The American Society of Mechanical Engineers (ASME), 2004)The objective of this study is to predict the Brinell hardness distribution in cold formed parts by relating the plastic strains found by finite element (FE) analysis to hardness. Based on ... -
Practical Methods for the Design of Sheet Formed Components
(The American Society of Mechanical Engineers (ASME), 2004)Commercial methods for the mechanical design of part and die shapes often rely on trial-and-error methods applied to either experiments or simulation, as guided by intuition. Academic alternatives ... -
Formation of Microscopic Voids in Resin Transfer Molded Composites
(The American Society of Mechanical Engineers (ASME), 2004)Performance of composite materials usually suffers from process-induced defects such as dry spots and microscopic voids. While effects of void content in molded composites have been studied ... -
Modeling Cyclic Deformation of HSLA Steels Using Crystal Plasticity
(The American Society of Mechanical Engineers (ASME), 2004)High strength low alloy (HSLA) steels, used in a wide variety of applications as structural components are subjected to cyclic loading during their service lives. Understanding the cyclic ... -
On Hydrogen-Induced Void Nucleation and Grain Boundary Decohesion in Nickel-Base Alloys
(The American Society of Mechanical Engineers (ASME), 2004)Experimental evidence indicates that nickel-base alloys fail in the presence of hydrogen by ductile intergranular fracture. The degradation mechanism involves void nucleation at grain boundary ...