Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1181-1200 of 3257
-
Enhancing Damping of Aluminium Using SiC and∕or Ge
(The American Society of Mechanical Engineers (ASME), 2005)Metallic material with enhanced stiffness and damping characteristics is actively sought in the design of dynamic mechanical systems for mechanical components. Germanium is known to remain distinct ... -
Determination of Precise Indentation Flow Properties of Metallic Materials Through Analyzing Contact Characteristics Beneath Indenter
(The American Society of Mechanical Engineers (ASME), 2005)The continuous indentation technique is widely used for nondestructive evaluation of the mechanical properties of devices and materials. In particular, flow properties can be obtained by using ... -
Pseudoelasticity of Single Crystalline Cu Nanowires Through Reversible Lattice Reorientations
(The American Society of Mechanical Engineers (ASME), 2005)Molecular dynamics simulations are carried out to analyze the structure and mechanical behavior of Cu nanowires with lateral dimensions of 1.45–2.89 nm. The calculations simulate the formation ... -
Atomistic Determination of Continuum Mechanical Properties of Ion-Bombarded Silicon
(The American Society of Mechanical Engineers (ASME), 2005)Highly disordered, ion-processed silicon is studied using a molecular dynamics simulation with empirical interatomic potentials. The surface free energy density, stress-strain relations, and continuum ... -
Interactions of Carbon Atoms and Dimer Vacancies on the Si(001) Surface
(The American Society of Mechanical Engineers (ASME), 2005)We investigate the interactions between substitutional carbon atoms on the defect free, (2×1) reconstructed Si(001) surface, and bring evidence that the interaction energy differs significantly ... -
Growth and Ordering of Si-Ge Quantum Dots on Strain Patterned Substrates
(The American Society of Mechanical Engineers (ASME), 2005)Manipulating the strain distribution along the surface of a substrate has been shown experimentally to promote spatial ordering of self-assembled nanostructures in heteroepitaxial film growth without ... -
A New Model for Springback Prediction for Aluminum Sheet Forming
(The American Society of Mechanical Engineers (ASME), 2005)A new model for springback, based on isotropic and kinematic hardening models, the Mroz multiple surfaces model, and observations from experimental data, is proposed in this paper. In this ... -
Nonlocality Effect in Atomic Force Microscopy Measurement and Its Reduction by an Approaching Method
(The American Society of Mechanical Engineers (ASME), 2005)In AFM measurements of surface morphology, the locality is a traditional assumption, i.e., the load recorded by AFM is simply the function of the distance between the tip of AFM and the point ... -
Tetragonal Phase Transformation in Gold Nanowires
(The American Society of Mechanical Engineers (ASME), 2005)First principle, tight binding, and semi-empirical embedded atom calculations are used to investigate a tetragonal phase transformation in gold nanowires. As wire diameter is decreased, tight ... -
Structure and Properties of Electrocodeposited Cu–Al2O3 Nanocomposite Thin Films
(The American Society of Mechanical Engineers (ASME), 2005)Nanocomposite thin films which consist of 50nmAl2O3 nanoparticles in a copper metal matrix were deposited on a silicon wafer. The thickness of the nanocomposite thin films was about 3microns ... -
Localized Necking Criterion for Strain-Softening Materials
(The American Society of Mechanical Engineers (ASME), 2005)The paper presents the development of a localized necking criterion based on the singularity of acoustic tensor. This criterion is applicable to materials exhibiting strain-softening behavior. The ... -
A Finite-Temperature Continuum Theory Based on Interatomic Potentials
(The American Society of Mechanical Engineers (ASME), 2005)There are significant efforts to develop continuum theories based on atomistic models. These atomistic-based continuum theories are limited to zero temperature (T=0K). We have developed a ... -
Coupled Atomistic/Discrete Dislocation Simulations of Nanoindentation at Finite Temperature
(The American Society of Mechanical Engineers (ASME), 2005)Simulations of nanoindentation in single crystals are performed using a finite temperature coupled atomistic/continuum discrete dislocation (CADD) method. This computational method for multiscale ... -
A Self-Consistent Model for the Inelastic Deformation of Nanocrystalline Materials
(The American Society of Mechanical Engineers (ASME), 2005)A self-consistent scheme is used to describe the behavior of nanocrystalline F.C.C. materials. The material is approximated as a composite with two phases. The inclusion phase represents the ... -
Special Issue on Nanomaterials and Nanomechanics
(The American Society of Mechanical Engineers (ASME), 2005)The behavior or materials at the nanoscale and the behavior of nanocomponents such as nanowires and nanotubes have been subjects of increasing research in recent years. The idea of dedicating ... -
A Thermodynamic Framework for Viscoplasticity Based on Overstress (VBO)
(The American Society of Mechanical Engineers (ASME), 2005)A thermodynamic framework is presented for the theory of Viscoplasticity Based on Overstress (VBO) developed by Krempl and co-workers (, and , 2001, in Lemaitre Handbook of Materials Behavior ... -
Effect of deformation path sequence on the behavior of nanoscale copper bicrystal interfaces
(The American Society of Mechanical Engineers (ASME), 2005)Molecular dynamics calculations are performed to study the effect of deformation sequence and history on the inelastic behavior of copper interfaces on the nanoscale. An asymmetric 45 deg tilt ... -
Abnormal Tribological Behavior of Multiwalled Nanotube Rafts Part I: Aligned Rafts
(The American Society of Mechanical Engineers (ASME), 2005)When two material surfaces are brought into contact, the classical Amonton’s law predicts a monotonically increasing relation between the frictional force and the normal pressure. An abnormal ... -
Analysis and Testing of Mixed-Mode Interlaminar Fracture Behavior of Glass-Cloth∕Epoxy Laminates at Cryogenic Temperatures
(The American Society of Mechanical Engineers (ASME), 2005)This paper presents results from an analytical and experimental study of the effect of temperature and mixed-mode ratio on the interlaminar fracture toughness in glass-cloth∕epoxy laminates. Mode ... -
Abnormal Tribological Behavior of Multiwalled Nanotube Rafts Part II: Inclined Rafts
(The American Society of Mechanical Engineers (ASME), 2005)The analysis in part I of this series is extended to the case of inclined and randomly distributed multiwall carbon nanotube (MWCNT) rafts that are brought into contact. The MWCNTs are modeled ...