Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1041-1060 of 3257
-
Mechanical Behavior of Alloy AA6111 Processed by Severe Plastic Deformation: Modeling and Experiment
(The American Society of Mechanical Engineers (ASME), 2007)An established dislocation density related, one-internal variable model was used, with some modifications, as a basis for modeling the mechanical response of aluminum alloy AA6111. In addition ... -
A Simple Analogous Model for the Determination of Cyclic Plasticity Parameters of Thin Wires to Model Wire Drawing
(The American Society of Mechanical Engineers (ASME), 2007)Cyclic stress-strain measurements have to be performed in order to determine the cyclic plasticity parameters of material models describing the Bauschinger effect. For thin wires, the performance ... -
Effect of Interference on the Mechanics of Load Transfer in Aircraft Fuselage Lap Joints
(The American Society of Mechanical Engineers (ASME), 2007)Much of the fatigue damage in aircraft structures can be linked to the stress concentration arising at the rivet/skin interface in fuselage lap-joints. Fatigue damage can degrade the strength ... -
Effect of Nozzle-Traveling Velocity on Oil Cavitation Jet Peening of Aluminum Alloy, AA 6063-T6
(The American Society of Mechanical Engineers (ASME), 2007)A new surface modification process was developed to introduce compressive residual stresses at the surface of components. In this process, instead of oil droplets a high-velocity cavitation jet ... -
Study on the Drilling of Titanium/Graphite Hybrid Composites
(The American Society of Mechanical Engineers (ASME), 2007)Titanium/graphite hybrid composites (TiGr) are a potentially enabling technology which satisfies the low structural weight fraction and long operational lifetime required for the high-speed civil ... -
Modeling the Influence of Material Structure on Deformation Induced Surface Roughening in AA7050 Thick Plate
(The American Society of Mechanical Engineers (ASME), 2007)A methodology for incorporating a description of material structure into a finite element formulation is presented. This work describes an experiment/simulation - based methodology for characterizing ... -
Hot Deformation Behavior of Bearing Steels
(The American Society of Mechanical Engineers (ASME), 2007)The material behaviors of two types of bearing steels at hot working conditions are investigated. Stress-strain curves at various temperatures (900–1300°C) and strain rates (1–50/s) are ... -
Experimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils
(The American Society of Mechanical Engineers (ASME), 2007)Details are provided for an experimental approach to study the tensile fatigue crack growth behavior of very thin metallic foils. The technique utilizes a center-notched specimen and a hemispherical ... -
Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes
(The American Society of Mechanical Engineers (ASME), 2007)Industrial boilers experience bulbous cracks in carbon steel water-wall tubes and other water-touched surfaces. Because these cracks are blunt and different from sharp fatigue cracks, they are ... -
The Influence of Temperature on the Forming Behavior of Metal/Polymer Laminates in Sheet Metal Forming
(The American Society of Mechanical Engineers (ASME), 2007)The influence of temperature on the forming behavior of an aluminum/polypropylene/aluminum (APA) sandwich sheet was studied. Shear and tensile tests were performed to determine the mechanical ... -
Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses
(The American Society of Mechanical Engineers (ASME), 2007)Finite element analysis was used in the current study to examine the effects of strain hardening and initial yield strength of workpiece material on machining-induced residual stresses (RS). An ... -
On the Reference Length and Mode Mixity for a Bimaterial Interface
(The American Society of Mechanical Engineers (ASME), 2007)We investigate properties that govern interfacial fracture within the framework of linear elastic fracture mechanics, including interfacial fracture toughness, mode mixity, and the associated reference ... -
Chloride Content Effect on the Corrosion Fatigue Properties of Superduplex Stainless Steels
(The American Society of Mechanical Engineers (ASME), 2007)The corrosion fatigue performance of a superduplex stainless steel in two different chloride-bearing solutions (30g∕l and 60g∕lNaCl) is explored in the present paper. Fatigue life results and ... -
An Experimental Determination of Optimum Processing Parameters for Al∕SiC Metal Matrix Composites Made Using Ultrasonic Consolidation
(The American Society of Mechanical Engineers (ASME), 2007)Ultrasonic consolidation, an emerging additive manufacturing technology, is one of the most recent technologies considered for fabrication of metal matrix composites (MMCs). This study was performed ... -
Effects of Molybdenum Content and Heat Treatment on Mechanical and Tribological Properties of a Low-Carbon Stellite® Alloy
(The American Society of Mechanical Engineers (ASME), 2007)The chemical composition of Stellite® 21 alloy was modified by doubling the molybdenum (Mo) content for enhanced corrosion and wear resistance. The specimens were fabricated using a casting ... -
Constitutive Modeling of Metals Based on the Evolution of the Strain-Hardening Rate
(The American Society of Mechanical Engineers (ASME), 2007)The mechanical threshold stress (MTS) model is not commonly used in industrial applications due to its complexity. The Zener–Hollomon parameter Z was utilized to develop a simplified and compact ... -
Characterization of the Core Properties of a Shock Absorbing Composite
(The American Society of Mechanical Engineers (ASME), 2007)This paper is on the characterization of the mechanical properties of Newtonian-type shock absorbing elastomeric composites. This composite material is a blend of elastomeric capsules or beads ... -
Modeling of Elastic Waves in Dynamically Loaded NiAl Bicrystals
(The American Society of Mechanical Engineers (ASME), 2007)Two methods have been used to simulate 2D elastic wave scattering in nickel aluminide (NiAl) bicrystals to study effects of grain boundaries and material anisotropy on elastic wave propagation. ... -
Effect of Strain Rate on the Dynamic Hardness in Metals
(The American Society of Mechanical Engineers (ASME), 2007)Traditionally, the hardness of materials is determined from indentation tests at low loading rates (static). However, considerably less work has been conducted in studying the dynamic hardness ... -
Erratum
(The American Society of Mechanical Engineers (ASME), 2006)We would like to extend an apology to the authors of the following two papers that were inadvertently switched in the publication schedule. Both papers will be linked to the correct issues ...