Journal of Energy Resources Technology: Recent submissions
Now showing items 981-1000 of 3450
-
A Mechanistic Model of Predicting Solid Particle Erosion on the Symmetry Plane of Elbows for Annular Flow
(The American Society of Mechanical Engineers (ASME), 2019)In the transportation process of oil and gas, solid particle erosion in pipelines is an inevitable problem. The erosion usually occurs in fittings with changing flow directions, such as elbows. A theoretical model based ... -
Effects of Air Flowrate on the Combustion and Emissions of Blended Corn Straw and Pinewood Wastes
(The American Society of Mechanical Engineers (ASME), 2019)This research investigated the effects of the specific primary (under-fire) air flowrate (m˙air) on the combustion behavior of a 50–50 wt % blend of raw corn straw (CS) and raw pinewood wastes in a fixed-bed reactor. This ... -
Stereoscopic Particle Image Velocimetry Measurements and Proper Orthogonal Decomposition Analysis of the In-Cylinder Flow of Gasoline Direct Injection Engine
(The American Society of Mechanical Engineers (ASME), 2019)Intake generated flows are known to have a fundamental influence on the combustion both in spark ignition (SI) and compression ignition engines. This study experimentally investigated the tumble flow structures inside a ... -
Combustion Performance Study of Aqueous Aluminum Oxide Nanofluid Blends in Compression Ignition Engine
(The American Society of Mechanical Engineers (ASME), 2019)This study attempts to identify the optimum dosing level of aqueous aluminum oxide nanofluid in diesel to improve combustion and engine performance and also to overcome the engine emission issues especially, the oxide of ... -
Performance Optimization of Mechanical Vapor Compression Desalination System Using a Water-Injected Twin-Screw Compressor
(The American Society of Mechanical Engineers (ASME), 2019)In this study, the thermal and operational characteristics of a 400 m3/day mechanical vapor compression desalination (MVCD) system that uses a water-injected twin-screw compressor have been studied and presented. A ... -
A Novel Reactor Configuration for Industrial Methanol Production From the Synthesis Gas
(The American Society of Mechanical Engineers (ASME), 2019)In this work, the methanol synthesis on a commercial industrial catalyst in a novel cylindrical radial flow packed-bed reactor is investigated. The adiabatic and nonadiabatic cylindrical radial flow reactors were proposed ... -
Micro Combined Heat and Power System Transient Operation in a Residential User Microgrid
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents an analysis of the transient operation of a micro combined heat and power (CHP) system, equipped with both thermal and electric storage units and connected with both electric and district heating grids. ... -
Effective Anaerobic Bio-Treatment of Fresh Leachate From Municipal Solid Waste Incineration Plant by Full-Scale Internal Circulation Reactor
(The American Society of Mechanical Engineers (ASME), 2019)This study aimed to investigate the effectiveness of the full-scale internal circulation (IC) reactor in biodegrading of municipal solid waste (MSW) fresh leachate under mesophilic conditions, where the anaerobic process ... -
Mobilization of Crude Oil in Porous Media With Oil-Soluble Surfactant Delivered by Hydrosoluble Micelles
(The American Society of Mechanical Engineers (ASME), 2019)In this work, an oil-soluble surfactant was studied to enhance crude oil mobilization in a cryolite-packed miniature bed. The cryolite packed bed provided a transparent, random porous medium for observation at the microscopic ... -
Transient Optimization of Natural Gas Networks Using Intelligent Algorithms
(The American Society of Mechanical Engineers (ASME), 2019)Compressor stations in natural gas networks should perform such that time-varying demands of customers are fulfilled while all of the system constraints are satisfied. Power consumption of compressor stations impose the ... -
Experimental Study of Turbulent Burning Velocity of Premixed Biogas Flame
(The American Society of Mechanical Engineers (ASME), 2019)Biogas is a renewable source of energy produced by anaerobic digestion of organic material and composed mainly of methane (CH4) and carbon dioxide (CO2). Despite its lower heating value, biogas can still replace fossil ... -
A Mathematical Investigation of Premixed Lycopodium Dust Flame in a Small Furnace
(The American Society of Mechanical Engineers (ASME), 2019)In the present study, a comprehensive mathematical method is developed to realize the flame expansion in the melting furnace zones. For this purpose, the furnace is composed of two zones: flame and post flame zones. Two ... -
Hydrodynamic Flow Characteristics in an Internally Circulating Fluidized Bed Gasifier
(The American Society of Mechanical Engineers (ASME), 2019)In this paper, the hydrodynamic flow inside an internally circulating fluidized bed (ICFBG) was characterized using experimental and three-dimensional computational fluid dynamics (CFD) models. Eulerian-Eulerian model (EEM) ... -
A Comprehensive Review of Thermal Enhanced Oil Recovery: Techniques Evaluation
(The American Society of Mechanical Engineers (ASME), 2019)The oil production from any well passes through three stages. The first stage is the natural extraction of oil under the well pressure, the second stage starts when the well pressure decreases. This second stage includes ... -
A Robust Rate of Penetration Model for Carbonate Formation
(The American Society of Mechanical Engineers (ASME), 2019)During the drilling operations, optimizing the rate of penetration (ROP) is very crucial, because it can significantly reduce the overall cost of the drilling process. ROP is defined as the speed at which the drill bit ... -
A Thermo-Environmental Evaluation of a Modified Combustion Gas Turbine Plant
(The American Society of Mechanical Engineers (ASME), 2019)This paper reports the comprehensive thermodynamic modeling of a modified combustion gas turbine plant where Brayton refrigeration cycle was employed for inlet air cooling along with evaporative after cooling. Exergetic ... -
Experimental Investigation of the Effect of Nanofluid on Thermal Energy Storage System Using Clathrate
(The American Society of Mechanical Engineers (ASME), 2019)Climatic change illustrates the need to new policy of load management. In this research, a special design of thermal energy storage (TES) system, with an appropriate storage medium that is suitable for residential and ... -
Advanced Exergy Analysis of a Compression–Absorption Cascade Refrigeration System
(The American Society of Mechanical Engineers (ASME), 2019)This work presents a theoretical thermodynamic study of a compression–absorption cascade refrigeration system using R134a and a lithium bromide–water solution as working fluids. First and second law of thermodynamics ... -
Thermochemical Upgrading of Calcium Bentonite for Drilling Fluid Applications
(The American Society of Mechanical Engineers (ASME), 2019)The rheological properties of bentonite suspensions depend on the chemical composition and the contained dominant element, such as calcium (Ca), potassium (K), and sodium (Na). Na-bentonite type is the one used in drilling ... -
Numerical Simulation of the Impact of Natural Fracture on Fluid Composition Variation Through a Porous Medium
(The American Society of Mechanical Engineers (ASME), 2019)In order to lessen the computational time in fractured oil reservoir simulations, all fractures are usually assumed to be as one equivalent fracture at the center or around the model. This, specially, has applications in ...