Journal of Energy Resources Technology: Recent submissions
Now showing items 961-980 of 3450
-
Experimental and Numerical Investigations in a Gas-Fired Boiler With Combustion Stabilizing Device
(American Society of Mechanical Engineers (ASME), 2019)The combustion stability has a significant influence on safety and reliability of a gas-fired boiler. In this study, a numerical model was first established and validated to investigate the effect of combustion stabilizing ... -
A Temperature Model for Synchronized Ultrasonic Torrefaction and Pelleting of Biomass for Bioenergy Production
(American Society of Mechanical Engineers (ASME), 2019)Low-energy and volumetric density of biomass has been a major challenge, hindering its large-scale utilization as a bioenergy resource. Torrefaction is a thermochemical pretreatment process that can significantly enhance ... -
A Numerical Simulation for the Determination of the Shunt Ratio at a T-Junction With Different Branch Angles, Viscosities, and Flow Rates
(American Society of Mechanical Engineers (ASME), 2019)T-junctions have been applied in water-control structures. A comprehensive understanding of shunt characteristics can contribute to the optimal design of T-junctions. In this work, we seek to understand the shunt ratio of ... -
Well Clean-Up Using a Combined Thermochemical/Chelating Agent Fluids
(American Society of Mechanical Engineers (ASME), 2019)The well clean-up process involves the removal of impermeable filter cake from the formation face. This process is essential to allow the formation fluids to flow from the reservoir to the wellbore. Different types of ... -
Evolution of Microexplosion Phenomenon in Parent–Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic–Lipophilic Balance Values
(American Society of Mechanical Engineers (ASME), 2019)This experimental study endeavors to investigate the evolution of microexplosion phenomenon of water in biodiesel emulsion droplets with the base fuel (B5) containing 95% diesel and 5% of palm oil methyl ester (POME). ... -
Review on Reaction Mechanisms of Sulfur Species During Coal Combustion
(American Society of Mechanical Engineers (ASME), 2019)Various low-NOx combustion technologies have been widely applied as primary measures to limit NOx emission in coal-fired boilers. However, this leads to the formation of high concentrations of H2S in the fuel-rich zone and ... -
Rheological Properties and Stability Characteristics of Biochar-Algae-Water Slurry Fuels Prepared by Wet Milling
(American Society of Mechanical Engineers (ASME), 2019)This study was aimed to understand the rheological properties and stability characteristics of biochar-algae-water (BAW) slurry fuels prepared by wet milling. A pine sawdust biochar and a chlorella vulgaris algae were used ... -
Low Salinity Hot Water Injection With Addition of Nanoparticles for Enhancing Heavy Oil Recovery
(The American Society of Mechanical Engineers (ASME), 2019)In this study, a novel technique of low salinity hot water (LSHW) injection with addition of nanoparticles has been developed to examine the synergistic effects of thermal energy, low salinity water (LSW) flooding, and ... -
A Holistic Approach to Characterize Mud Loss Using Dynamic Mud Filtration Data
(The American Society of Mechanical Engineers (ASME), 2019)Drilling mud loss in highly porous media and fractured formations has been one of the industry's focuses in the past decades. Wellbore dynamics and lithology complexities continue to push for more research into accurate ... -
A Semi-Analytical Method for Modeling Two-Phase Flow Behavior in Fractured Carbonate Oil Reservoirs
(The American Society of Mechanical Engineers (ASME), 2019)It is quite common for oil/gas two-phase flow in developing fractured carbonate oil reservoirs. Many analytical models proposed for black oil wells in fractured carbonate reservoirs are limited to single-phase flow cases ... -
Investigation of Formation Damage Induced During Drill-In Process of Ultradeep Fractured Tight Sandstone Gas Reservoirs
(The American Society of Mechanical Engineers (ASME), 2019)Ultradeep fractured tight sandstone gas reservoir is easy to suffer from severe formation damage during the drill-in process, yet few papers have been published on the corresponding formation damage mechanisms. This paper ... -
A Novel Design of Triple-Hybrid Absorption Radiant Building Cooling System With Desiccant Dehumidification
(The American Society of Mechanical Engineers (ASME), 2019)In air-conditioning, strategy of decoupling cooling and ventilation tasks has stimulated considerable interest in radiant cooling systems with dedicated outdoor air system (DOAS). In view of this, current paper presents a ... -
Performance Analysis of a Solar-Powered Multi-Effect Refrigeration System
(The American Society of Mechanical Engineers (ASME), 2019)The main objective of the current work is to investigate the thermodynamic performance of a novel solar powered multi-effect refrigeration system. The proposed cycle consists of a solar tower system with a heliostat field ... -
EnergyPlus Integration Into Cosimulation Environment to Improve Home Energy Saving Through Cyber-Physical Systems Development
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents a co-simulation platform which combines a building simulation tool with a cyber-physical systems (CPS) approach. Residential buildings have a great potential of energy reduction by controlling home ... -
A New Approach Toward Power Output Enhancement Using Multirotor Systems With Shrouded Wind Turbines
(The American Society of Mechanical Engineers (ASME), 2019)A multirotor system (MRS) is defined as containing more than one rotor in a single structure. MRSs have a great potential as a wind turbine system, saving mass and cost, and showing scale ability. The shrouded wind turbine ... -
A Study of Power Production and Noise Generation of a Small Wind Turbine for an Urban Environment
(The American Society of Mechanical Engineers (ASME), 2019)Wind energy has had a major impact on the generation of renewable energy. While most research and development focuses on large, utility-scale wind turbines, a new application is in the field of small wind turbines for the ... -
Examining the Aerodynamic Drag and Lift Characteristics of a Newly Developed Elliptical-Bladed Savonius Rotor
(The American Society of Mechanical Engineers (ASME), 2019)The elliptical-bladed Savonius wind turbine rotor has become a subject of interest because of its better energy capturing capability. Hitherto, the basic parameters of this rotor such as overlap ratio, aspect ratio, and ... -
Investigating the Effect of Medium Liquid Layer Circulation on Temperature Distribution in a Thermoelectric Generator Heat Exchanger Assembly
(The American Society of Mechanical Engineers (ASME), 2019)Thermoelectric generators (TEGs) are used to produce electricity utilizing two energy reservoirs. Despite the extensive research conducted on thermoelectric (TE) modules, their efficiencies are still low; therefore, any ... -
Estimation of Remaining Useful Lifetime of Lithium-Ion Battery Based on Acoustic Emission Measurements
(The American Society of Mechanical Engineers (ASME), 2019)Lithium-ion battery (LIB) utilization as energy storage device in electric and hybrid-electric vehicles, wind turbine systems, a number of portable electrical devices, and in many other application fields is encouraged due ... -
Real-Time Determination of Rheological Properties of Spud Drilling Fluids Using a Hybrid Artificial Intelligence Technique
(The American Society of Mechanical Engineers (ASME), 2019)The rheological properties of the drilling fluid play a key role in controlling the drilling operation. Knowledge of drilling fluid rheological properties is very crucial for drilling hydraulic calculations required for ...