Journal of Energy Resources Technology: Recent submissions
Now showing items 941-960 of 3450
-
Performance Studies on a Wind Turbine Blade Section for Low Wind Speeds With a Gurney Flap
(American Society of Mechanical Engineers (ASME), 2019)The flow characteristics and the lift and drag behavior of a thick trailing-edged airfoil that was provided with fixed trailing-edge flaps (Gurney flaps) of 1–5% height right at the back of the airfoil were studied both ... -
Effect of Piston Crevices on the Numerical Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural-Gas Spark-Ignition Operation
(American Society of Mechanical Engineers (ASME), 2019)Three-dimensional computational fluid dynamics internal combustion engine simulations that use a simplified combustion model based on the flamelet concept provide acceptable results with minimum computational costs and ... -
Optimization of Kaplan Hydroturbine at Very Low Head With Rim-Driven Generator
(American Society of Mechanical Engineers (ASME), 2019)The objective of the paper is to study the design and optimization of Kaplan hydroturbines for a very low head (less than 3 m), with a particular emphasis on the use of rim-drive electrical generators. The work is based ... -
Hydrous Ethanol Steam Reforming and Thermochemical Recuperation to Improve Dual-Fuel Diesel Engine Emissions and Efficiency
(American Society of Mechanical Engineers (ASME), 2019)Dual-fuel strategies can enable replacement of diesel fuel with low reactivity biofuels like hydrous ethanol. Previous work has shown that dual-fuel strategies using port injection of hydrous ethanol can replace up to 60% ... -
Simulation and Performance Investigation of a Biomass Gasification System for Combined Power and Heat Generation
(American Society of Mechanical Engineers (ASME), 2019)The Blue Tower gasifier (BTG) is a promising and relatively new type of technology that can convert various organic materials into syngas. The process proceeds through a stage-reforming concept and uses heat carrier materials ... -
Drilling Rate of Penetration Prediction of High-Angled Wells Using Artificial Neural Networks
(American Society of Mechanical Engineers (ASME), 2019)Predicting the rate of penetration (ROP) is a significant factor in drilling optimization and minimizing expensive drilling costs. However, due to the geological uncertainty and many uncontrolled operational parameters ... -
Effect of Port Premixed Liquefied Petroleum Gas on the Engine Characteristics
(American Society of Mechanical Engineers (ASME), 2019)In the present work, liquefied petroleum gas (LPG) is premixed with air for combustion in a compression ignition engine, along with neat rubber seed oil as the direct injected fuel. The LPG is injected directly into the ... -
Study on Pore Structures of Tight Sandstone Reservoirs Based on Nitrogen Adsorption, High-Pressure Mercury Intrusion, and Rate-Controlled Mercury Intrusion
(American Society of Mechanical Engineers (ASME), 2019)Pore–throat size is a key parameter for the assessment of reservoirs. Tight sandstone has the strong heterogeneity in the distribution of pores and throats; consequently, it is very difficult to characterize their ... -
Performances and Emissions Evaluation of a Microturbojet Engine Running on Biodiesel Blends
(American Society of Mechanical Engineers (ASME), 2019)This paper analyzes the performances and the emissions of the JETCAT P80 microengine, when jet A jet A + 10% biodiesel (BD), jet A + 20% biodiesel, and jet A + 30% biodiesel are utilized as fuel, and to each of these ... -
An Anthropomorphic Wind Turbine Blade
(American Society of Mechanical Engineers (ASME), 2019)This study presents a new wind turbine blade design for overcoming the restrictions of large-scale wind turbines deployment. The road design, terrain nature, and logistic capabilities represent the main barriers to maneuver ... -
Mathematical Modeling of Fluid Flow to Unconventional Oil Wells With Radial Fractures and Its Testing With Field Data
(American Society of Mechanical Engineers (ASME), 2019)Radial fractures are created in unconventional gas and oil reservoirs in modern well stimulation operations such as hydraulic refracturing (HRF), explosive fracturing (EF), and high energy gas fracturing (HEGF). This paper ... -
Wind Turbine Aerodynamic Modeling in Icing Condition: Three-Dimensional RANS-CFD Versus Blade Element Momentum Method
(American Society of Mechanical Engineers (ASME), 2019)Icing limits the performance of wind turbines in cold climates. The prediction of the aerodynamic performance losses and their distribution due to ice accretion is essential. Blade element momentum (BEM) is the basis of ... -
Self-Healing Performance Comparison Between Two Promising Vascular Vessel Systems of the Wind Turbine Blade
(American Society of Mechanical Engineers (ASME), 2019)Hollows produced by wires and borosilicate tubes are two significant approaches for the storage and transport of healing agent for self-healing wind turbine blades. To compare the performance for the two approaches, sheet ... -
A Stand-Alone Hybrid Photovoltaic, Fuel Cell, and Battery System: Case Studies in Jordan
(American Society of Mechanical Engineers (ASME), 2019)The main purpose of this study is to investigate the feasibility of using a hybrid photovoltaic (PV), fuel cell (FC), and battery system to power different load cases, which are intended to be used at the Al-Zarqa governorate ... -
A Compositional Thermal Multiphase Wellbore Model for Use in Non-Isothermal Gas Lifting
(American Society of Mechanical Engineers (ASME), 2019)In this paper, a new compositional mechanistic wellbore model, including gas lifting parameters, is presented. In the governing equations of this model, new terms for mass transfer between phases and the enthalpy of phase ... -
Heat Transfer in Internal Cooling Channels of Gas Turbine Blades: Buoyancy and Density Ratio Effects
(American Society of Mechanical Engineers (ASME), 2019)The present work investigates the effects of buoyancy and wall heating condition on the thermal performance of a rotating two-pass square channel with smooth walls. The U-bend channel has a square cross section with a ... -
Development of a Continuous Fluidized Bed Reactor for Thermochemical Energy Storage Application
(American Society of Mechanical Engineers (ASME), 2019)Thermochemical energy storage (TCES) represents one of the most promising energy storage technologies, currently investigated. It uses the heat of reaction of reversible reaction systems and stands out due to the high ... -
Damköhler Number Analysis on The Effect of Ozone on Autoignition and Flame Propagation in Internal Combustion Engines
(American Society of Mechanical Engineers (ASME), 2019)Ozone-assisted combustion has shown promise in stabilizing combustion and extending operating range of internal combustion engines. However, it has been reported that sensitivity of ozone quantity on combustion varies ... -
Nuclear Magnetic Resonance Simulation Experiment for a Water Drive Gas Reservoir
(American Society of Mechanical Engineers (ASME), 2019)The water invasion property and water drive gas displacement efficiency of water drive gas reservoirs are studied under different displacement pressure gradients by using nuclear magnetic resonance (NMR) online detection ... -
Which One Does Better Predict the Heating Value of Biomass?—Dry Based or As-Received Based Proximate Analysis Results?
(American Society of Mechanical Engineers (ASME), 2019)Thirty-nine different species of waste biomass materials that include woody or herbaceous resources as well as nut shells and juice pulps were used to develop empirical equations to predict the calorific value based on the ...