Journal of Energy Resources Technology: Recent submissions
Now showing items 1001-1020 of 3450
-
Laminar Burning Speeds of Nitromethane-Gasoline Blends at Elevated Temperatures and Pressures
(The American Society of Mechanical Engineers (ASME), 2019)Nitromethane is extensively used in drag races and in glow plug unmanned aerial vehicle (UAV) engines. However, it has not been analyzed in the combustion literature enough. Nitromethane has a low stoichiometric air–fuel ... -
A Note on Model Selection Based on the Percentage of Accuracy-Precision
(The American Society of Mechanical Engineers (ASME), 2019)Mathematical methods such as empirical correlations, analytical models, numerical simulations, and data-intensive computing (data-driven models) are the key to the modeling of energy science and engineering. Accrediting ... -
Orthogonal Collocation Method for Solving the Diffusivity Equation: Application on Dual Porosity Reservoirs With Constant Pressure Outer Boundary
(The American Society of Mechanical Engineers (ASME), 2019)Fluid flow inside heterogeneous structure of dual porosity reservoirs is presented by two coupled partial differential equations (PDE). Finding an analytical solution for the diffusivity equations is tedious or even ... -
Application of the Computational Singular Perturbation Method to a Turbulent Diffusion CH4/H2/N2 Flame Using OpenFOAM
(The American Society of Mechanical Engineers (ASME), 2019)This work highlights the ability of the computational singular perturbation (CSP) method to calculate the significant indices of the modes on evolution of species and the degree of participation of reactions. The exploitation ... -
Estimation of CO2 Diffusivity in Brine by Use of the Genetic Algorithm and Mixed Kernels-Based Support Vector Machine Model
(The American Society of Mechanical Engineers (ASME), 2019)Diffusion coefficient of carbon dioxide (CO2), a significant parameter describing the mass transfer process, exerts a profound influence on the safety of CO2 storage in depleted reservoirs, saline aquifers, and marine ... -
Comparison of Energy Consumption for Residential Thermal Models With Actual Measurements
(The American Society of Mechanical Engineers (ASME), 2019)High temperature that reaches to 50 °C in summer, high humidity, and dust storms are considered as the main characteristics of the climate of many countries around the world such as those in the Gulf States, Asia, and ... -
Effect of Heat Flux Distribution Profile on Hydrogen Concentration in an Allothermal Downdraft Biomass Gasification Process: Modeling Study
(The American Society of Mechanical Engineers (ASME), 2019)Considering the potential of using concentrating solar power systems to supply the heat required for the allothermal gasification process, this study analyzes hydrogen production in such a system by assuming typical radiative ... -
Well-Placement Optimization in Heavy Oil Reservoirs Using a Novel Method of In Situ Steam Generation
(The American Society of Mechanical Engineers (ASME), 2019)Determination of optimal well locations plays an important role in the efficient recovery of hydrocarbon resources. However, it is a challenging and complex task. The objective of this paper is to determine the optimal ... -
Effect of Shear and Water Cut on Phase Inversion and Droplet Size Distribution in Oil–Water Flow
(The American Society of Mechanical Engineers (ASME), 2019)Oil–water dispersed flow occurs commonly in the petroleum industry during the production and transportation of crudes. Phase inversion occurs when the dispersed phase grows into the continuous phase and the continuous phase ... -
Characterization of Foamy Oil and Gas/Oil Two-Phase Flow in Porous Media for a Heavy Oil/Methane System
(The American Society of Mechanical Engineers (ASME), 2019)In our previous study, a series of experiments had been conducted by applying different pressure depletion rates in a 1 m long sand-pack. In this study, numerical simulation models are built to simulate the lab tests, for ... -
Binary Biodiesel Blend Endurance Characteristics in a Compression Ignition Engine
(The American Society of Mechanical Engineers (ASME), 2019)The results obtained on wear assessment from a compression ignition (CI) engine fueled with a blend of 70% amla seed biodiesel (AB) and 30% eucalyptus oil (EU) on volume basis (called AB70EU30). The results showed stable ... -
Thermo-Ecological Cost of Electricity Generated in Wind Turbine Systems
(The American Society of Mechanical Engineers (ASME), 2019)Wind power is one of the most popular renewable energy sources (RES), characterized by rapid growth of installed power in the energy mix of many countries. Usually, the influence of wind technologies on the depletion of ... -
Drag-Reduction and Resonance Problems of a Jointed Drillstring in the Presence of an Axial Excitation Tool
(The American Society of Mechanical Engineers (ASME), 2019)Axial excitation tools (AETs) have the ability to improve slide-drilling efficiency by reducing the friction between the drillstring and the wellbore wall. However, drag-reduction effects are not always satisfactory, and ... -
Impact of Binary Biofuel Blend on Lubricating Oil Degradation in a Compression Ignition Engine
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents lubricating oil performance in a compression ignition (CI) engine fueled with a binary fuel blend of 70% aamla seed oil biodiesel and 30% eucalyptus oil (EU) on volume basis. This blended fuel was stable ... -
Performance Evaluation of Gas Production With Consideration of Dynamic Capillary Pressure in Tight Sandstone Reservoirs
(The American Society of Mechanical Engineers (ASME), 2019)In this paper, a pragmatic and consistent framework has been developed and validated to accurately predict reservoir performance in tight sandstone reservoirs by coupling the dynamic capillary pressure with gas production ... -
Theoretical Analysis on the Constitution of Calorific Values of Biomass Fuels
(The American Society of Mechanical Engineers (ASME), 2019)The present work explored the constitution of the calorific values of biomass fuels and the mechanism by which basic chemical compositions affect the fuel calorific data. For the first time, an energy conversion model was ... -
Flow Rate Effect on Wax Deposition Behavior in Single-Phase Laminar Flow
(The American Society of Mechanical Engineers (ASME), 2019)Wax deposition is an extremely common occurrence affecting flow assurance in oil fields. Under the laminar flow condition, the effect of the flow rate on wax deposition is still unclear. In this study, a flow loop test was ... -
Short-Term Forecasting of Natural Gas Consumption Using Factor Selection Algorithm and Optimized Support Vector Regression
(The American Society of Mechanical Engineers (ASME), 2019)Forecasting of natural gas consumption has been essential for natural gas companies, customers, and governments. However, accurate forecasting of natural gas consumption is difficult, due to the cyclical change of the ... -
Characterization of the Nonroad Modified Diesel Engine Using a Novel Entropy-VIKOR Approach: Experimental Investigation and Numerical Simulation
(The American Society of Mechanical Engineers (ASME), 2019)Excessive use of diesel engines and continuous increase in environmental pollution has drawn the attention of researchers in the area of the compression ignition engine. In this research article, an innovative investigation ... -
Estimation of Relative Permeability and Capillary Pressure for PUNQ-S3 Model Using a Modified Iterative Ensemble Smoother
(The American Society of Mechanical Engineers (ASME), 2019)The iterative ensemble smoother (IES) algorithm has been extensively used to implicitly and inversely determine model parameters by assimilating measured/reference production profiles. The performance of the IES algorithms ...