Now showing items 3141-3160 of 3450

    • Interaction of Waves With a Moored Semisubmersible 

      S. K. Chakrabarti; D. C. Cotter (The American Society of Mechanical Engineers (ASME), 1984)
      A semisubmersible moored in waves experiences a steady offset and two types of motion—a first-order motion at frequencies corresponding to the incident wave frequencies and a slowly oscillating ...
    • Optimum Design of Elastically Supported Gyroscopes for Ship Stabilization 

      K.-N. Lee; A. Seireg (The American Society of Mechanical Engineers (ASME), 1984)
      The study reported in this paper deals with the development of a dynamic model for the analysis of elastically supported gyroscopic absorber systems for ship stabilization. The gryoscopes are ...
    • LNG Facility Risk Assessment 

      L. E. Brown; L. M. Romine; C. D. Zinn (The American Society of Mechanical Engineers (ASME), 1983)
    • Technical Editor’s Page 

      Jin S. Chung (The American Society of Mechanical Engineers (ASME), 1983)
    • Technical Editor’s Page 

      Jin S. Chung (The American Society of Mechanical Engineers (ASME), 1983)
    • Technical Editor’s Page 

      Jin S. Chung (The American Society of Mechanical Engineers (ASME), 1983)
    • Spun Steel Pipes for the Offshore Industry 

      A. Royer; M. Gantois; B. Dumas (The American Society of Mechanical Engineers (ASME), 1983)
      Many parts either for sea-line pipes as “buckle” or “crack arrestor,” or for structures may require the use of wall tubular products with high mechanical properties. Such heavy-wall pipes may ...
    • Nonlinear Response of Reinforced Concrete Slabs Represented by Beam Grids 

      D. G. Morrison (The American Society of Mechanical Engineers (ASME), 1983)
      The objective of this paper is to present a grid model for the nonlinear analysis of plates. The model, composed of a grid of beam elements responding in flexure and torsion, is described ...
    • Approximate Solution to Conduction Freezing With Density Variation 

      V. J. Lunardini (The American Society of Mechanical Engineers (ASME), 1983)
    • Application of Dual-Energy Gamma-Ray Technique for Nondestructive Soil Moisture and Density Measurement During Freezing 

      O. A. Ayorinde (The American Society of Mechanical Engineers (ASME), 1983)
      Frost heave is a phenomenon unique to freezing soils. To study frost heave, a dual-energy gamma-ray technique has been adapted to determine nondestructively the soil bulk density variation and ...
    • Experiments With a Diffuser-Augmented Model Wind Turbine 

      B. L. Gilbert; K. M. Foreman (The American Society of Mechanical Engineers (ASME), 1983)
      The initial stages of the experimental development of the diffuser-augmented wind turbine (DAWT) employed various screen meshes to simulate the energy extraction mechanisms of a wind turbine. In ...
    • A Facility and Approach to Performance Test of Check Valves 

      S. L. Collier; C. C. Hoerner (The American Society of Mechanical Engineers (ASME), 1983)
      The important time for a check valve is the short period during which flow decelerates. The characteristics of this period are not well defined. The investigation suggests the use of deceleration ...
    • Properties of Air Leaving a Hydraulic Air Compressor (HAC) 

      Li-Ting Chen; W. Rice (The American Society of Mechanical Engineers (ASME), 1983)
      An analysis is made of the diffusion-rate-controlled absorption of air into the water in the two-phase flow processes occurring in a hydraulic air compressor (HAC). The analysis enables calculation ...
    • Behavior and Wear of Check Valves 

      S. L. Collier; C. C. Hoerner; C. E. Davila (The American Society of Mechanical Engineers (ASME), 1983)
      Since check valves are often installed and forgotten, some guidance is needed for their installation so that maintenance can be minimized and scheduled. A study of their behavior over a wide ...
    • Flow-Induced Motions of Multiple Risers 

      T. Overvik; E. Hjort-Hansen; G. Moe (The American Society of Mechanical Engineers (ASME), 1983)
      Vortex-induced and galloping vibrations of flexible risers in steady, uniform currents have been investigated. The cross sections consisted of a bundle of pipes tied together to form a so-called ...
    • Sway-Added Mass and Impact Load of a Large Tanker to a Jetty in Shallow Water 

      C. H. Kim (The American Society of Mechanical Engineers (ASME), 1983)
      This paper presents a new simple technique for evaluating sway-added mass and the impact energy absorbed by fenders and dolphins when maneuvering a tanker to a jetty in a shallow water ...
    • On the Efficiency of Some Recently Developed Integration Algorithms for Offshore Problems 

      T. K. Datta; A. M. Sood (The American Society of Mechanical Engineers (ASME), 1983)
      The efficiency of some recently developed integration schemes, namely, Hilber’s ∝-method, collocation schemes and large time step integration schemes developed by Argyris, is evaluated by applying ...
    • Estimation of the Mean Velocity of Acoustic Signal Propagation for Sea Operations 

      H. C. Menck (The American Society of Mechanical Engineers (ASME), 1983)
      A representative velocity profile and a priori bathymetric information about possible undersea device depths are the only data required to generate coefficients for a three-dimensional quadric ...
    • Parameters on Fracture Strength of Sea Ice 

      N. Urabe; A. Yoshitake; T. Iwasaki; M. Kawahara (The American Society of Mechanical Engineers (ASME), 1983)
      Compressive crushing strength on brackish ice and sea ice and fracture toughness value on sea ice were measured as parameters associated with fracture strength of ice. The compressive crushing ...
    • Field In-Ice Pressure Sensor Response Tests 

      A. C. T. Chen; PE; J. S. Templeton; PE (The American Society of Mechanical Engineers (ASME), 1983)
      An ice pressure sensor has been designed and built at Exxon Production Research Company (EPR) to measure the pressure in an ice sheet. Laboratory and analytical studies were performed to ...