Journal of Energy Resources Technology: Recent submissions
Now showing items 3041-3060 of 3450
-
A Model for Jet Piercing of Oil Sands
(The American Society of Mechanical Engineers (ASME), 1985)The impact of a stationary confined high pressure water jet on a solid surface has been investigated. Flow visualization by high-speed photography and measurements of average surface pressures ... -
Effect of Soil Anisotropy on the Wave-Induced Pore Pressures in the Seabed
(The American Society of Mechanical Engineers (ASME), 1985)Waves propagating over the ocean bottom create pressure waves on the seafloor, which during severe storms can lead to significant deformations or even failure. To investigate this phenomenon, a ... -
Stability of a String in Axial Flow
(The American Society of Mechanical Engineers (ASME), 1985)The equation of motion of a long slender beam submerged in an infinite fluid moving with constant speed is derived using Hamilton’s principle. The upstream end of the beam is pinned and the ... -
An Approximate Procedure for Assessing the Effects of Mudslides on Offshore Pipelines
(The American Society of Mechanical Engineers (ASME), 1985)The theoretical basis of an approximate procedure for assessing the effects of mudslides on buried marine pipelines is presented. The procedure has the capability to account for geometric ... -
The Parametrical Stress Analysis of Tubular T Joints
(The American Society of Mechanical Engineers (ASME), 1985)The relationship between the geometric parameters of α, β, γ and τ of tubular T joints and chord stress concentration factor, SCF, has been investigated. With the use of calculated values as ... -
Residual Strength of Dented Tubulars: Impact Energy Correlation
(The American Society of Mechanical Engineers (ASME), 1985)A procedure for the analysis of the damage of tubular members by denting and bending under lateral load is described. This leads to a relationship between impact energy and consequent damage. ... -
Free Span Vibrations of Submarine Pipelines in Steady Flows—Effect of Free-Stream Turbulence on Mean Drag Coefficients
(The American Society of Mechanical Engineers (ASME), 1985)In this paper part of the results of a laboratory study related to free span vibrations of submarine pipelines in steady and wave-induced fluid flows are summarized. Tests have been carried ... -
Adaptive Prediction of the Motion of Marine Vehicles
(The American Society of Mechanical Engineers (ASME), 1985)A predictor of the future motion of a vessel subject to random wave and wind forces, would have a variety of applications in ocean engineering. Most previous work has assumed that the wave ... -
Comparative Evaluation of Fracture Mechanics Methodologies as Applied to Offshore Structural Design and Integrity Analyses
(The American Society of Mechanical Engineers (ASME), 1985)A comparative study was performed to evaluate the three most widely used elastic-plastic fracture mechanics methodologies. The three methods are the crack opening displacement (COD) design curve, ... -
Vertical Relative Motion Between Two Adjacent Platforms in Oblique Waves
(The American Society of Mechanical Engineers (ASME), 1985)The paper presents a strip theory and its correlation with experiment and analysis on the relative motions of two ships. The ships are in close proximity and in parallel position in oblique ... -
Storm Quick-Disconnect Mooring System
(The American Society of Mechanical Engineers (ASME), 1985)Severe storms such as hurricanes or typhoons can cause significant damage to offshore drilling rigs. Drillships, due to their high mobility, can flee severe storms after disconnecting from the ... -
Structure, Salinity and Density of Multi-Year Sea Ice Pressure Ridges
(The American Society of Mechanical Engineers (ASME), 1985)Data are presented on the variation of ice structure, salinity, and density in multi-year pressure ridges from the Beaufort Sea. Two continuous multi-year pressure ridge cores are examined as ... -
A Slender-Body Theory for a Rigid Pile Under Static or Low-Frequency Axial Loading
(The American Society of Mechanical Engineers (ASME), 1985)If the seabed is modeled as a poroelastic medium, the stresses and pore pressure induced by sea waves attacking pile-supported structures can be approximately treated by a quasi-static, single-phase ... -
Experimental Study on Wave-Induced Structural Responses of Semisubmersibles
(The American Society of Mechanical Engineers (ASME), 1985)This paper describes experimental studies on the motion, mooring tension and structural responses of a typical semisubmersible in regular waves. A 1/50-scale structural dynamic model of two-pontoon ... -
Riser Instrumentation: Deep Water Drilling Campaign Results
(The American Society of Mechanical Engineers (ASME), 1985)During the 1982–1983 drilling campaign in the Mediterranean, two wells were drilled by the Discoverer Seven Seas in record water depths of 1714 m and 1252 m. The riser was equipped with ... -
Investigation of API 8 Round Casing Connection Performance—Part II: Stresses and Criteria
(The American Society of Mechanical Engineers (ASME), 1984)Comparison of stresses in Part I showed that the APILT&C 8 Round threaded casing connection could be accurately analyzed with finite element methods, with models that both included and ... -
Geotechnical and Geological Factors Affecting Offshore Engineering and Seabed Utilization on a Carbonate Margin: St. Croix, V.I.
(The American Society of Mechanical Engineers (ASME), 1984)The northern margin of St. Croix, V.I. is characterized by three morphological features: a narrow shallow water carbonate shelf; a steep slope; and a deep-sea basin. Shallow water reef material ... -
Discussion: “Investigation of the Alexander L. Kielland Failure—Metallurgical and Fracture Analysis” (Almar-Naess, A., Haagensen, P. J., Lian, B., Moan, T., and Simonsen, T., 1984, ASME J. Energy Resour. Technol., 106, pp. 24–31)
(The American Society of Mechanical Engineers (ASME), 1984) -
Investigation of API 8 Round Casing Connection Performance—Part III: Sealability and Torque
(The American Society of Mechanical Engineers (ASME), 1984)The performance of the API LT&C 8 Round casing connection is investigated using 7-in.-29-lb/ft pipe size. Part I showed that the finite element method was applicable for analysis using both ... -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1984)