Now showing items 3021-3040 of 3450

    • Tensile Strength of Multi-Year Pressure Ridge Sea Ice Samples 

      G. F. N. Cox; J. A. Richter-Menge (The American Society of Mechanical Engineers (ASME), 1985)
      Thirty-six constant strain-rate uniaxial tension tests were performed on vertically oriented multi-year pressure ridge samples from the Beaufort Sea. The tests were performed on a closed-loop ...
    • Quantitative Analysis of Ice Sheet Failure Against an Inclined Plane 

      R. M. W. Frederking; G. W. Timco (The American Society of Mechanical Engineers (ASME), 1985)
      The main force components on inclined offshore structures in the Arctic include the flexural and crushing behavior of the ice sheet, rotation and translation of broken ice, gravity and buoyancy ...
    • Solid-Phase Methane Fermentation of Solid Wastes 

      S. Ghosh (The American Society of Mechanical Engineers (ASME), 1985)
      This paper presents the development of a novel solid-phase methane fermentation process involving acidic bioleachate production from an organic bed and biomethanation of the bed-liquefaction products ...
    • A Design Formulation for Axisymmetric Collapse of Stiffened and Unstiffened Cylinders 

      J. G. A. Croll; C. P. Ellinas (The American Society of Mechanical Engineers (ASME), 1985)
      A procedure, developed for predicting the elastic-plastic general axisymmetric collapse of stiffened and unstiffened cylinders, is presented. This permits the formulation of reliable lower bounds ...
    • Protection of Arctic Submarine Pipelines Against Ice Scour 

      M. A. Nessim; I. J. Jordaan (The American Society of Mechanical Engineers (ASME), 1985)
      A decision-theoretic approach to the problem of optimizing strategies for the protection of submarine pipelines against ice scour is presented. The model simultaneously considers twinning, deep ...
    • Optimum Design of Submarine Suspended Pipelines 

      Z. Huang; A. Seireg (The American Society of Mechanical Engineers (ASME), 1985)
      Almost all submarine pipelines are currently laid on the sea floor. This practice is inherently expensive and the system is difficult to maintain and has a high possibility of excessive bending ...
    • Recent Advances in High-Frequency Wave Forces on Fixed Structures 

      S. K. Chakrabarti (The American Society of Mechanical Engineers (ASME), 1985)
      The computation of wave forces is one of the most vital tasks in the design of offshore structures. Many analytical tools are available for the determination of wave effects on offshore ...
    • A Damage Mechanics Model for Uniaxial Deformation of Ice 

      D. G. Karr (The American Society of Mechanical Engineers (ASME), 1985)
      A one-dimensional stress-strain relationship is developed for pure polycrystalline ice subjected to uniaxial compression. The model is based on the continuous damage theories and includes the ...
    • Behavior of Damaged Tubular Structural Members 

      Y. Ueda; S. M. H. Rashed (The American Society of Mechanical Engineers (ASME), 1985)
      An analytical model of dented tubular members is constructed. Using this model, an ultimate strength interaction relationship between axial force and biaxial bending moments is derived. The ...
    • A Strip Method for Lateral Drift Force of a Semisubmersible 

      C. H. Kim; W. Bao (The American Society of Mechanical Engineers (ASME), 1985)
      This paper presents the results of an application of a strip technique for the prediction of the lateral drift forces on a semisubmersible platform floating in oblique regular waves. The method ...
    • In-Ice Calibration Tests for an Elongated, Uniaxial Brass Ice Stress Sensor 

      J. B. Johnson (The American Society of Mechanical Engineers (ASME), 1985)
      An elongated, uniaxial brass ice stress sensor has been developed by the University of Alaska and used in several field experiments. Laboratory calibration tests have been conducted, in a 60 ...
    • Collisions and Damage of Offshore Structures: A State-of-the-Art 

      C. P. Ellinas; S. Valsgard (The American Society of Mechanical Engineers (ASME), 1985)
      Over the recent years, following the very rapid increase in the construction and installation of offshore structures, there has been a considerable growth of interest in the assessment of the ...
    • Wear Characteristics of Polycrystalline Diamond Compact Drill Bits in Small Diameter Rock Drilling 

      C. L. Hough; B. Das (The American Society of Mechanical Engineers (ASME), 1985)
      The wear characteristics of polycrystalline diamond compact (PDC) drill bits were investigated in the context of drilling small holes in a hard abrasive medium. An efficient method for measuring ...
    • Uniaxial Constitutive Equation of Ice From Beam Tests 

      P. C. Xirouchakis; T. Wierzbicki (The American Society of Mechanical Engineers (ASME), 1985)
      A method is proposed to obtain ice uniaxial stress, strain, strain-rate relations from beam tests. The basic advantage of the proposed analytical technique is that it is a direct method of ...
    • Reservoir Performance in Viscoelastic Porous Media 

      F. M. Rago; H. Ohkuma; K. Sepehrnoori; T. W. Thompson (The American Society of Mechanical Engineers (ASME), 1985)
      The mass balance equations for a two-phase two-component fluid system are written for viscoelastic porous media. The resulting equations are approximated by finite differences and the resulting ...
    • Flexural Strength and Fracture Toughness of Urea Model Ice 

      G. W. Timco (The American Society of Mechanical Engineers (ASME), 1985)
      In many tests of ice-structure interactions performed using physical modeling techniques, the ice can fail in bending, flexure or by tensile cracking. Because of this, it is necessary to know ...
    • General Solutions for Pistonlike Displacement of Compressible Fluids in Porous Media 

      S. H. Advani; J. S. Torok; J. K. Lee (The American Society of Mechanical Engineers (ASME), 1985)
      Exact solutions for the one-dimensional problem of a compressible fluid having a time-dependent pressure at the source (fracture face) and displacing a compressible reservoir fluid are generated. ...
    • Pressure Drop Correlations for Inclined Two-Phase Flow 

      H. Mukherjee; J. P. Brill (The American Society of Mechanical Engineers (ASME), 1985)
      Pressure drop behavior in two-phase inclined flow was studied. For bubble and slug flow, a no-slip friction factor calculated from the Moody diagram was found adequate for friction head loss ...
    • Dynamics of Roller Cone Bits 

      D. Ma; J. J. Azar (The American Society of Mechanical Engineers (ASME), 1985)