Now showing items 2721-2740 of 3450

    • Biaxial Characterization of Carbon/Epoxy Unidirectional and Quasi-Isotropic Composites 

      G. T. Mase (The American Society of Mechanical Engineers (ASME), 1991)
      An experimental test program is described in which biaxial failure envelopes were generated for unidirectional [0]8 and quasi-isotropic [0/+45/90/−45]s specimens made from Toray T800HY/3910 ...
    • Numerical Simulation of Different Types of Steam Surface Condensers 

      C. Zhang; A. C. M. Sousa; J. E. S. Venart (The American Society of Mechanical Engineers (ASME), 1991)
      A numerical procedure is developed to simulate the fluid flow and heat transfer processes in the shell-side of steam surface condensers. The governing equations are solved in primitive variable ...
    • Development of Micromechanics Finite Element for Analysis of Composites With Local Damage 

      Y. W. Kwon; K. Y. Byun (The American Society of Mechanical Engineers (ASME), 1991)
      An analysis model is presented to analyze continuous fiber-reinforced composite structures with some local damage such as matrix cracks. Two separate material properties of fiber and matrix are ...
    • Toughening Behavior and Interfacial Properties of Fiber-Reinforced Ceramic Composites 

      C. H. Hsueh (The American Society of Mechanical Engineers (ASME), 1991)
      Toughening of ceramics by incorporating strong fibers has become an established technology, resulting in the creation of a new generation of tough ceramic composites. This toughening effect is ...
    • Design of Composite Cylindrical Panels for Maximum Axial and Shear Buckling Capacity 

      N. Kumar; T. R. Tauchert (The American Society of Mechanical Engineers (ASME), 1991)
      Response of a cylindrical panel made of layers of composite material and subjected to in-plane loads is investigated. Prebuckling deformations are determined for antisymmetric angle-ply and cross-ply ...
    • A Hybrid Experimental-Numerical Test Specimen for Laminated Composite Materials 

      W. K. Rule; G. E. Weeks (The American Society of Mechanical Engineers (ASME), 1991)
      A new technique is described for determining all four elastic constants of a lamina from a single laminated specimen of arbitrary, symmetric lay-up. This specimen is subjected to three different ...
    • A Model of the Enhancement of Combustion of Coal-Water Slurry Fuels Using High-Intensity Acoustic Fields 

      S. Yavuzkurt; M. Y. Ha (The American Society of Mechanical Engineers (ASME), 1991)
      Combustion of coal-water slurry fuels is simulated in the presence of high-intensity acoustic fields which increases heat and mass transfer from the droplets and particles, and thereby enhances ...
    • Entrainment Limitations in Thermosyphons and Heat Pipes 

      G. P. Peterson; B. K. Bage (The American Society of Mechanical Engineers (ASME), 1991)
      The isothermal characteristics and high effective thermal conductivity of heat pipes and thermosyphons make them particularly useful in air to air and process to air heat recovery systems. ...
    • Condensation of a Downward Flowing Vapor on a Horizontal Cylinder Embedded in a Porous Medium 

      J. Orozco (The American Society of Mechanical Engineers (ASME), 1991)
      This article presents the results of an investigation on condensation of a downward flowing vapor on a horizontal cylinder embedded in a vapor-saturated porous medium. The Brinkman model is ...
    • Effect of an Acoustic Field on the Combustion of Coal Particles in a Flat Flame Burner 

      S. Yavuzkurt; M. Y. Ha; G. Reethof; A. W. Scaroni; G. Koopmann (The American Society of Mechanical Engineers (ASME), 1991)
      The effects of an acoustic field on the enhancement of coal combustion are investigated. A flat flame burner using methane-air mixtures as the fuel is used for the experiments. Micronized coal ...
    • Ignition and Combustion of Liquid Fuel Droplet in a Convective Medium 

      S. K. Dash; S. K. Som (The American Society of Mechanical Engineers (ASME), 1991)
      A mathematical model of droplet combustion in surroundings of hot gas with a uniform free stream motion is made from the numerical solution of the conservation equations of heat, mass and ...
    • A Model of the Enhancement of Coal Combustion Using High-Intensity Acoustic Fields 

      S. Yavuzkurt; M. Y. Ha; G. Koopmann; A. W. Scaroni (The American Society of Mechanical Engineers (ASME), 1991)
      A model for the enhancement of coal combustion in the presence of high-intensity acoustic fields has been developed. A high-intensity acoustic field induces an oscillating velocity over pulverized ...
    • Optimal Design of a Pilot OTEC Power Plant in Taiwan 

      C. H. Tseng; J. C. Yang; K. Y. Kao (The American Society of Mechanical Engineers (ASME), 1991)
      In this paper, an optimal design concept has been utilized to find the best designs for a complex and large-scale ocean thermal energy conversion (OTEC) plant. The OTEC power plant under this ...
    • A Thermal Analysis of Hot Oiling 

      F. C. Arnold (The American Society of Mechanical Engineers (ASME), 1991)
      The injection of hot oil to clean the formation and tubing of accumulated paraffin has been used for many years in petroleum production. Although effective in freeing tubulars immobilized by ...
    • Effect of Pipe Eccentricity on Surge Pressures 

      M. Haciislamoglu; J. Langlinais (The American Society of Mechanical Engineers (ASME), 1991)
      This work is an analysis of non-Newtonian fluid flow in an annulus of any eccentricity with inner pipe motion, for typical petroleum drilling operations. The annular flow geometry and the ...
    • Degradation of Graphite/Polymer Composites in Seawater 

      W. C. Tucker (The American Society of Mechanical Engineers (ASME), 1991)
      Glass-reinforced plastics have a substantial history of use in seawater. With the advent of high-performance graphite fibers offering greater stiffness than glass, some marine engineering applications ...
    • High-Order Mixture Homogenization of Fiber-Reinforced Composites 

      A. Toledano; H. Murakami (The American Society of Mechanical Engineers (ASME), 1991)
      An asymptotic mixture theory of fiber-reinforced composites with periodic microstructure is presented for rate-independent inelastic responses, such as elastoplastic deformation. Key elements are the ...
    • Performance of the Wells Turbine With Variable Pitch Rotor Blades 

      L. M. C. Gato; L. R. C. Eça; A. F. de O. Falcão (The American Society of Mechanical Engineers (ASME), 1991)
      The Wells turbine is an axial-flow air-turbine designed to extract energy from the ocean waves. The turbine is self-rectifying, i.e., produces an unidirectional time-averaged torque from a ...
    • Smearing of a Kick While Being Displaced From a Well 

      M. Haciislamoglu; J. Langlinais (The American Society of Mechanical Engineers (ASME), 1991)
      Well control operations while drilling with an oil-base mud can suffer several unexpected phenomena. One of these is the dispersion (smearing) of the gas in solution whenever a gas kick is ...
    • Buckling of Laminated Cylindrical Panels Under Uniaxial Compression 

      K. Chandrashekhara (The American Society of Mechanical Engineers (ASME), 1991)
      Buckling characteristics of anisotropic laminated cylindrical panels are presented using an isoparametric nine-noded rectangular element. Kinematic relations, extended to include the first-order shear ...