Journal of Energy Resources Technology: Recent submissions
Now showing items 2701-2720 of 3450
-
Application of Nonequilibrium Thermodynamics in Second Law Analysis
(The American Society of Mechanical Engineers (ASME), 1991)We examine the exergy balance of a multi-component fluid subject to viscous dissipation processes, heat transfer by conduction, heat transfer by radiation, matter diffusion and chemical reactions. ... -
The Drag and Added-Mass Coefficients of Various Buffers Vibrating Axially in Water
(The American Society of Mechanical Engineers (ASME), 1991)In order to analyze the longitudinal vibration of a pipe-string for mining mineral resources at deep-sea bottoms, the fluid forces acting on the buffer and pump-module attached to the pipe-string ... -
Tubular Bending and Pull-Out Forces in High-Curvature Well Bores
(The American Society of Mechanical Engineers (ASME), 1991)This paper is concerned with drag forces developed on tubulars in high-curvature well bores typically found in drainhole and horizontal drilling. The dog-leg severity of these types of boreholes ... -
Second Law Optimization of a Sensible Heat Thermal Energy Storage System With a Distributed Storage Element—Part II: Presentation and Interpretation of Results
(The American Society of Mechanical Engineers (ASME), 1991)This study explores the behavior of a flat-slab, sensible heat thermal energy storage system, the physical design and operation of which have been optimized to minimize the production of entropy ... -
A Composite Plate Theory With Rotatory Inertia, Transverse Shear, and Normal Stress Effects
(The American Society of Mechanical Engineers (ASME), 1991)A refined theory for the flexural motions of composite plates is presented. The theory incorporates rotatory inertia in addition to the influence of transverse normal strain, transverse normal ... -
Liquid Hold-Up, Pressure Drop, and Velocity Profiles in Steady Uniform Stratified Flow
(The American Society of Mechanical Engineers (ASME), 1991)A two-dimensional model to predict flow behavior for stratified smooth and stratified wavy two-phase flow is presented. The velocity profiles in both the liquid and the gas are assumed to be ... -
Comparison of Mass and Heat Transfer Coefficients of Liquid-Desiccant Mixtures in a Packed Column
(The American Society of Mechanical Engineers (ASME), 1991)In order to analyze the performance of packed columns for dehumidification processes, calculation of the mass and heat transfer coefficients of the packing material used in the column is ... -
High-Temperature Steam Supply: Configuration Design for Temperature Control Stability
(The American Society of Mechanical Engineers (ASME), 1991)The main objective of this investigation is to report on the development and testing of a numerical code to simulate the operating characteristics of a steam-powered propulsion system. The test ... -
Moment Closure Model for Nitrogen Oxide Formation in Pulverized Coal Combustion Furnaces
(The American Society of Mechanical Engineers (ASME), 1991)A moment closure model has been developed to model fuel-bound NO formation in a turbulent pulverized coal flame in a furnace. The effect of turbulence on combustion is accounted for by solving ... -
The Thermodynamics of Compressed Air Exergy Storage
(The American Society of Mechanical Engineers (ASME), 1991)The Compressed Air Energy Storage (CAES) concept is analyzed as an exergy storage concept. A thermodynamic analysis involving the application of the first and second laws of thermodynamics to ... -
Review of Methanol and Compressed Natural Gas (CNG) as Alternative for Transportation Fuels
(The American Society of Mechanical Engineers (ASME), 1991) -
A Theoretical Analysis of a Self-Propelled Backward-Bent Duct Wave Energy Conversion System
(The American Society of Mechanical Engineers (ASME), 1991)An analysis of a self-propelled Backward-Bent Duct Barge (BBDB) wave energy conversion system operating at an averaged forward speed is presented. The energy required to propel the system is a ... -
A Simplified Analysis for Cold Storage in Porous Capsules With Solidification
(The American Society of Mechanical Engineers (ASME), 1991)This paper investigates the thermal performance of a cold storage system utilizing water porous capsules as phase change material. The proposed cold storage system can be used to shift electric ... -
Second Law Optimization of a Sensible Heat Thermal Energy Storage System With a Distributed Storage Element—Part 1: Development of the Analytical Model
(The American Society of Mechanical Engineers (ASME), 1991)This study explores the behavior of a flat-slab, sensible heat thermal energy storage system, the physical design and operation of which have been optimized to minimize the production of entropy ... -
Oxygen Enrichment in Combustion Processes: Comparative Experimental Results From Several Application Fields
(The American Society of Mechanical Engineers (ASME), 1991)The effects of using oxygen to partially or wholly replace fuel air in small-size melting furnaces were studied over a range of application fields. Following definition of the useful parameters, ... -
Investigation of SPM Mooring Tension and Barge Orientation With Wind, Waves and Strong Current
(The American Society of Mechanical Engineers (ASME), 1991)The vessel moored to a single-point mooring is subjected to the combined action of current, wind and waves. In this paper the vessel orientation and corresponding mooring line loads are examined ... -
A Study of Impact Response of Composite Pipe
(The American Society of Mechanical Engineers (ASME), 1991)The objective of this study was to gain a better understanding of the low-velocity impact phenomena of composite pipe. The focus was on test method development, and material and damage ... -
Deflections and Stresses of Antisymmetric Angle-Ply Clamped Plates Under Transverse Loading
(The American Society of Mechanical Engineers (ASME), 1991)Closed-form solutions are not tractable for clamped composite plates due to the boundary conditions and anisotropy of the plate. In the present work, a method based on Lagrange multipliers is ... -
Direct-Contact Heat Transfer for Air Bubbling Through Water
(The American Society of Mechanical Engineers (ASME), 1991)Experiments on direct-contact heat transfer of air injected through an orifice and bubbling through a constant temperature, stagnant, pool of water showed an increase in air temperature ranging ... -
Mechanical and Electrical Properties of Glass and Carbon Fiber-Reinforced Composites
(The American Society of Mechanical Engineers (ASME), 1991)The design of composite rotors for high-energy density pulsed power supplies demands accurate characterization of both the mechanical and electrical properties of fiber-reinforced epoxy. The ...