Journal of Energy Resources Technology: Recent submissions
Now showing items 2561-2580 of 3450
-
High-Power TSP Bits
(The American Society of Mechanical Engineers (ASME), 1994) -
Three-Dimensional Hydraulic Fracture Simulation Using Fixed Grid Finite Element Algorithms
(The American Society of Mechanical Engineers (ASME), 1994)A three-dimensional hydraulic fracture simulator (HYFFIX) is reformulated using finite element methodology and a newly adapted fixed grid. The numerical procedures for the coupled equations governing ... -
An Optimal Operational Advisory System for a Brewery’s Energy Supply Plant
(The American Society of Mechanical Engineers (ASME), 1994)An optimal operational advisory system is proposed to operate rationally a brewery’s energy supply plant from the economical viewpoint. A mixed-integer linear programming problem is formulated so ... -
A Study of Particle Settling in Non-Newtonian Fluids—Part II: Rheological Characterization of Polymer Solutions
(The American Society of Mechanical Engineers (ASME), 1994)Aqueous solutions of different concentrations of three polymers: a synthetic high molecular weight polymer, partially hydrolyzed polyacrylamide (PHPA), a xanthantype biopolymer (Xanvis), and a ... -
Experimental Testing and Thermoeconomic Analysis of an Incineration Plant Postcombustor With Oxycombustion
(The American Society of Mechanical Engineers (ASME), 1994)Experimental testing was performed on a prototype postcombustor fueled by pure oxygen and designed to treat exhaust gases from industrial waste incineration. The tests validated the technical ... -
A Study of Particle Settling in Non-Newtonian Fluids—Part I: A New Method for the Study of Particle Settling in Drilling and Fracturing Fluids
(The American Society of Mechanical Engineers (ASME), 1994)A drag force measurement method is presented which makes it possible to study the settling of particles in transparent and opaque fluids. A dimensionless treatment that takes into account the ... -
Numerical Modeling of Rock-Bit Interaction in Laminated Formations
(The American Society of Mechanical Engineers (ASME), 1994)Numerical modeling of the rock-bit interaction process in laminated formation has been performed using a finite element approach. A finite element program was developed with the assumption of ... -
Formation Permeability Determination by Micro or Mini-Hydraulic Fracturing
(The American Society of Mechanical Engineers (ASME), 1994)This paper presents a theory and its application for post-fracture pressure-transient analyses. The proposed procedure, known as “impulse fracture test,” is an injection/falloff test designed for ... -
Local Entropy Generation Analysis of a Rotary Magnetic Heat Pump Regenerator
(The American Society of Mechanical Engineers (ASME), 1994)The rotary magnetic heat pump has attractive thermodynamic performance, but it is strongly influenced by the effectiveness of the regenerator. This study uses local entropy generation analysis ... -
Pore Collapse in Weakly Cemented and Porous Rocks
(The American Society of Mechanical Engineers (ASME), 1994)Withdrawal of fluids from hydrocarbon reservoirs results in a decrease in pore pressure which in turn leads to an increase in effective stress on rock matrix. Such a situation may lead to ... -
Steady and Cyclic Purging of Closed-End Side-Branches in Natural Gas Facilities
(The American Society of Mechanical Engineers (ASME), 1994)The problem of purging closed-end side-branches in natural gas facilities is considered in this paper. Experimental results obtained in a scale model are presented, where air and carbon dioxide ... -
Macroscopic Analysis of Axisymmetric Functionally Gradient Materials Under Thermal Loading
(The American Society of Mechanical Engineers (ASME), 1994)The axisymmetric functionally gradient materials (FGMs) subject to nonuniform temperature variations were studied with the combined use of homogenization and inhomogeneous eigenstrained media analysis. ... -
3-D Stress Analysis of Cross-Ply Laminated Composites
(The American Society of Mechanical Engineers (ASME), 1994)A consistent higher-order theory is presented for static deformation and stress analysis of cross-ply thick laminates. Emphasis is placed on consistence with the 3-D boundary conditions and ... -
Submerged Electric Arc Decomposition of Methanol for Cold-Starting Methanol-Fueled Engines
(The American Society of Mechanical Engineers (ASME), 1994)Methanol is an attractive alternative fuel based on its engine performance and emission characteristics. Methanol can be synthesized from biomass or urban waste, and as a result, it does not ... -
Performance Evaluation of Two Azeotropic Refrigerant Mixtures of HFC-134a With R-290 (Propane) and R-600a (Isobutane)
(The American Society of Mechanical Engineers (ASME), 1994)The reduction in chlorofluorocarbon (CFC) and hydrochlorofluorocarbon (HCFC) production and the scheduled phase-out of these ozone-depleting refrigerants require the development and determination of ... -
Effect of Process Damping on Longitudinal Vibrations in Drillstrings
(The American Society of Mechanical Engineers (ASME), 1994)This paper shows the effect of process damping—caused by the interference between the cutter and the previously cut surface—on the stability of drillstrings. The method of including process ... -
Role of Porosity in Estimates of Composite Elastic Constants
(The American Society of Mechanical Engineers (ASME), 1994)The presence of small amounts of residual void space (on the order of one percent by volume) is sufficient to make estimates of composite elastic constants (obtained while ignoring this porosity) ... -
Two-Phase Flow Correlations as Applied to Pumping Well Testing
(The American Society of Mechanical Engineers (ASME), 1994)In a pumping-well buildup test, computation of bottom-hole pressure (BHP) and flow rate (BHF) requires the use of a two-phase flow correlation for estimating the gas void-fraction or holdup ... -
What is Diffusion?
(The American Society of Mechanical Engineers (ASME), 1994)In earlier publications, heat Q ← is defined as an interaction that is entirely distinguishable from work W → . The energy exchanged Q ← is T Q times the entropy exchanged S ← , where T ... -
Sunder H. Advani
(The American Society of Mechanical Engineers (ASME), 1994)