Journal of Energy Resources Technology: Recent submissions
Now showing items 1601-1620 of 3450
-
In Memoriam: Building on the Legacy of Elias P. Gyftopoulos (1927–2012) Entropy and Thermodynamics Made Rigorous
(The American Society of Mechanical Engineers (ASME), 2015)Indeed, in the international thermodynamics community, he has been very influential. His crystal clear understanding of the entropy balance made him a leader in the 1970s and the 1980s, when the methods of availability ... -
Realtime Rate of Penetration Optimization Using the Shuffled Frog Leaping Algorithm
(The American Society of Mechanical Engineers (ASME), 2015)The increasing complexities of wellbore geometry imply an increasing well cost. It has become more important than ever to achieve an increased rate of penetration (ROP) and, thus, reduced cost per foot. To achieve maximum ... -
Experimental Study on the Effect of Hydrogen Enrichment of Methane on the Stability and Emission of Nonpremixed Swirl Stabilized Combustor
(The American Society of Mechanical Engineers (ASME), 2015)An ultra lean mixture (د• ≤ 0.5) of methane–hydrogen–air was experimentally investigated to explore the effect of fuel flexibility on the flame stability and emission of a nonpremixed swirl stabilized combustor. ... -
An Experimental Investigation of the Use of Combined Resistivity and Temperature Logs for Scale Monitoring In Carbonate Formations During CO2 Sequestration
(The American Society of Mechanical Engineers (ASME), 2015)This study investigates the prospect of using permanent downhole resistivity and temperature sensors for scale monitoring during CO2 sequestration in saline carbonate aquifer. Current industry practice involves continuous ... -
Support Vector Regression and Computational Fluid Dynamics Modeling of Newtonian and Non Newtonian Fluids in Annulus With Pipe Rotation
(The American Society of Mechanical Engineers (ASME), 2015)The estimation of the pressure losses inside annulus during pipe rotation is one of the main concerns in various engineering professions. Pipe rotation is a considerable parameter affecting pressure losses in annulus during ... -
Modeling of Entropy Generation in Turbulent Premixed Flames for Reynolds Averaged Navier–Stokes Simulations: A Direct Numerical Simulation Analysis
(The American Society of Mechanical Engineers (ASME), 2015)The modeling of the mean entropy generation rate Sآ·"' genآ¯ due to combined actions of viscous dissipation, irreversible chemical reaction, thermal conduction and mass diffusion (i.e., Tآ¯1,Tآ¯2,Tآ¯3, and Tآ¯4) in the ... -
Land Sail Vehicle to Generate Electricity
(The American Society of Mechanical Engineers (ASME), 2015)The sailing record was broken in the fall of 2012. The aerodynamically designed sail allowed the racing boat to skim the water at speeds higher than the prevailing wind speed. This speed sailing record was the initial ... -
Retracted: “Multiscale Multiphysics Modeling, Analysis, Simulation, and Fabrication of Carbon Nanotube Based Integrated Power Inductor for System On Chip With Magnetic Cores†[ASME Journal of Energy Resources Technology, 2012, 134(4), p. 042002]
(The American Society of Mechanical Engineers (ASME), 2015)The above referenced paper is being retracted from the Journal of Energy Resources Technology because of unrebutted allegations that it contains confidential and proprietary information used without permission. -
An Experimental Investigation of Reactivity Controlled Compression Ignition Combustion in a Single Cylinder Diesel Engine Using Hydrous Ethanol
(The American Society of Mechanical Engineers (ASME), 2015)Dualfuel reactivitycontrolled compression ignition (RCCI) combustion using port injection of a less reactive fuel and earlycycle direct injection (DI) of a more reactive fuel has been shown to yield both high thermal ... -
Retracted: “Multiscale Multiphysics Modeling and Fabrication of Carbon Nanotubes Based Power Transformer for Photovoltaic Solar Cell†[ASME Journal of Resources Technology, 2013, 135(2), p. 021202]
(The American Society of Mechanical Engineers (ASME), 2015)The above referenced paper is being retracted from the Journal of Energy Resources Technology because of unrebutted allegations that it contains confidential and proprietary information used without permission. -
Comprehensive Hydromechanical Specific Energy Calculation for Drilling Efficiency
(The American Society of Mechanical Engineers (ASME), 2015)Over the last few years, different types of bits have been introduced to meet the challenges of steerable as well as rotary steerable systems; and it is imperative that bits be utilized optimally in these systems. As ... -
Experimental Investigation of Nano Biomaterial Applications for Heavy Oil Recovery in Shaly Porous Models: A Pore Level Study
(The American Society of Mechanical Engineers (ASME), 2015)Application of nano or biomaterials for enhanced oil recovery (EOR) has been recently much attended by petroleum engineering researchers. However, how would be the displacement mechanisms and how would change the recovery ... -
Challenges During Shallow and Deep Carbonate Reservoirs Stimulation
(The American Society of Mechanical Engineers (ASME), 2015)Carbonate reservoir stimulation has been carried out for years using HCl or HClbased fluids. High HCl concentration should not be used when the well completion has Crbased alloy in which the protective layer is chrome oxide ... -
Measurement of Laminar Burning Speeds and Investigation of Flame Stability of Acetylene (C2H2)/Air Mixtures
(The American Society of Mechanical Engineers (ASME), 2015)Laminar burning speeds and flame structures of spherically expanding flames of mixtures of acetylene (C2H2) with air have been investigated over a wide range of equivalence ratios, temperatures, and pressures. Experiments ... -
Borehole Stability Analysis in Deepwater Shallow Sediments
(The American Society of Mechanical Engineers (ASME), 2015)Deepwater shallow sediment is lessconsolidated, with a rock mechanical behavior similar to saturated soil. It is prone to borehole shrinkage and downhole leakage. Assume the deepwater shallow sediments are homogeneous, ... -
Full Fluid–Solid Cohesive Finite Element Model to Simulate Near Wellbore Fractures
(The American Society of Mechanical Engineers (ASME), 2015)This paper presents finiteelement simulation for hydraulic fracture's initiation, propagation, and sealing in the near wellbore region. A full fluid solid coupling module is developed by using pore pressure cohesive elements. ... -
Preliminary Investigation of Direct Injection Neat n Butanol in a Diesel Engine
(The American Society of Mechanical Engineers (ASME), 2015)The characteristics of combustion, emissions, and thermal efficiency of a diesel engine with direct injection (DI) neat nbutanol were investigated. The engine ran at a load of 6.5–8.0 bar indicated mean effective ... -
Experimental Investigations of Particulate Size and Number Distribution in an Ethanol and Methanol Fueled HCCI Engine
(The American Society of Mechanical Engineers (ASME), 2015)Alcohols (ethanol and methanol) are being widely considered as alternative fuels for automotive applications. At the same time, homogeneous charge compression ignition (HCCI) engine has attracted global attention due to ... -
Invariant Forms of Conservation Equations for Reactive Fields and Hydro Thermo Diffusive Theory of Laminar Flames
(The American Society of Mechanical Engineers (ASME), 2015)A scaleinvariant model of statistical mechanics is described leading to invariant Enskog equation of change that is applied to derive invariant forms of conservation equations for mass, thermal energy, linear momentum, and ... -
Near Critical CO2 Flow Measurement and Visualization
(The American Society of Mechanical Engineers (ASME), 2015)Nearcritical CO2 flow has been studied because of its potential application in carbon dioxide capture and sequestration, which is one of the proposed solutions for reducing greenhouse gas emission. Near the critical point ...