Now showing items 1581-1600 of 3450

    • Evaluating the Influence of Exhaust Back Pressure on Performance and Exhaust Emissions Characteristics of a Multicylinder, Turbocharged, and Aftercooled Diesel Engine 

      Mittal, Mayank; Donahue, Ron; Winnie, Peter (The American Society of Mechanical Engineers (ASME), 2015)
      An experimental study was conducted to quantify the effects of exhaust back pressure (EBP) on performance and exhaust emissions characteristics of a diesel engine for generator application. The electromechanical system was ...
    • Study of Combustion Characteristics of Ethanol at Different Dilution With the Carrier Gas 

      Imteyaz, Binash; Habib, Mohamed A. (The American Society of Mechanical Engineers (ASME), 2015)
      With the everrising concern of global warming, carbon capture is gaining the reputation of one of the most challenging fields of research. A very promising technology to capture CO2 is oxycombustion. Oxycombustion offers ...
    • Effects of Temperature on Internal Resistances of Lithium Ion Batteries 

      Hossain Ahmed, Sazzad; Kang, Xiaosong; Bade Shrestha, S. O. (The American Society of Mechanical Engineers (ASME), 2015)
      The performance of a lithiumion battery is significantly dependent on temperature conditions. At subzero temperatures, due to higher resistances, it shows lower capacity and power availability that may affect adversely ...
    • Modeling and Performance Analysis of an Integrated System: Variable Speed Operated Internal Combustion Engine Combined Heat and Power Unit–Photovoltaic Array 

      Radu, Robert; Micheli, Diego; Alessandrini, Stefano; Casula, Iosto; Radu, Bogdan (The American Society of Mechanical Engineers (ASME), 2015)
      The paper presents the model of a combined heat and power (CHP) unit, based on a variable speed internal combustion engine (ICE) interfaced with a photovoltaic (PV) system. This model is validated by means of experimental ...
    • Recommendations for Energy–Water–Food Nexus Problems 

      Wong, Kaufui Vincent; Pecora, Charles (The American Society of Mechanical Engineers (ASME), 2015)
      Around the world, climate change has brought about seemingly more incidences of climate extremes. SubSaharan Africa is a prime example of a region with many countries suffering from water scarcity. Water scarcity is quite ...
    • Simulation of Oxy–Fuel Combustion of Heavy Oil Fuel in a Model Furnace 

      Ben; Ahmed, Pervez; Habib, M. A. (The American Society of Mechanical Engineers (ASME), 2015)
      The present study aims at investigating the characteristics of oxycombustion of heavy oil liquid fuel in a downfired model furnace. Nonpremixed probability density function (PDF) mixture model was used to simulate the ...
    • Experimental and Numerical Investigation of La2NiO4 Membranes for Oxygen Separation: Geometry Optimization and Model Validation 

      Habib, Mohamed A.; Ahmed, Pervez; Ben; Mezghani, Khaled; Alam, Zeeshan; Shao; Ghoniem, A. F. (The American Society of Mechanical Engineers (ASME), 2015)
      The present work aims at developing a computational model for the prediction of oxygen separation through La2NiO4 disk shaped membranes. The influence of oxygen concentration on the permeation rate was studied experimentally. ...
    • A Novel Sequence of Exposition of Engineering Thermodynamics * 

      Paolo Beretta, Gian; Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      We present the foundations of thermodynamics in a novel sequence in which all basic concepts are defined in terms of well known mechanical ideas. Many definitions are new. The order of introduction of concepts is: system ...
    • What is a Chemical Equilibrium State?* 

      Paolo Beretta, Gian; Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      We review the chemical equilibrium equations, and conclude that both their derivation and their meaning are problematic. We find that these equations can be established for a suitably defined simple system without chemical ...
    • What is a Simple System?* 

      Paolo Beretta, Gian; Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      We discuss relations among properties of systems that consist of any amounts of constituents (including one particle), that have volume as the only parameter, and that are in thermodynamic equilibrium or stable equilibrium ...
    • On the Evolution of the Definition of Entropy From Clausius to Today* 

      Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      Carnot analyzed an engine operating between two reservoirs. Through a peculiar mode of reasoning, he found the correct optimum shaft work performed during a cyclic change of state of the engine. Clausius justified Carnot's ...
    • What is the Third Law?* 

      Paolo Beretta, Gian; Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      We discuss entropies of systems at very low temperatures or, equivalently, the third law of thermodynamics. We conclude that definitive values of such entropies can be established only by experiments on systems with very ...
    • Energy Conservation Education: Major Considerations* 

      Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      Now, there is no doubt that the problem of energy is extremely difficult and the discussions that are going on in our Congress reflect the fact. It's not simply as Dr. Belding says that Washington works in peculiar ways. ...
    • Micro Emulsion Phase Behavior of a Cationic Surfactant at Intermediate Interfacial Tension in Sandstone and Carbonate Rocks 

      Yassin, Mahmood Reza; Ayatollahi, Shahab; Rostami, Behzad; Hassani, Kamran; Taghikhani, Vahid (The American Society of Mechanical Engineers (ASME), 2015)
      Based on the conventional approach, the trapped oil in rock pores can be easily displaced when a Winsor type (III) microemulsion is formed in the reservoir during surfactant flooding. On the other hand, the Winsor type ...
    • Thermodynamic Analysis of Thermal Responses in Horizontal Wellbores 

      Ayala H., Luis F.; Dong, Ting (The American Society of Mechanical Engineers (ASME), 2015)
      Wellbore models are required for integrated reservoir management studies as well as optimization of production operations. Distributed temperature sensing (DTS) is a smart well technology deployed for permanent downhole ...
    • Electromagnetic Radiation: A Carrier of Energy and Entropy * 

      Paolo Beretta, Gian; Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      Starting from the properties of the electromagnetic radiation field at stable equilibrium, we derive expressions for the flows of energy and entropy between two black bodies at different temperatures, interacting only ...
    • The Fuel Shortage and Thermodynamics—The Entropy Crisis* 

      Keenan, Joseph H.; Gyftopoulos, Elias P.; Hatsopoulos, George N. (The American Society of Mechanical Engineers (ASME), 2015)
    • Energy–Water–Food Nexus and Recommendations for Security 

      Wong, Kaufui Vincent (The American Society of Mechanical Engineers (ASME), 2015)
      The clean, renewable sources of energy are the wind, water, and the sun. Geothermal energy from the Earth is a good source of energy for electricity generation that has not been fully utilized. Sustainable energy sources ...
    • What is the Second LAW? * 

      Gyftopoulos, E. P.; Beretta, G. P. (The American Society of Mechanical Engineers (ASME), 2015)
      The thesis of this article is that thermodynamics is a rigorous science, and that the first law and the second law can be stated in an unambiguous and general way so that their implications are concrete and valid for both ...
    • What is Heat?* 

      Paolo Beretta, Gian; Gyftopoulos, Elias P. (The American Society of Mechanical Engineers (ASME), 2015)
      We define heat as a particular kind of nonwork interaction that involves only energy and entropy transfers, and that is entirely distinguishable from work. The existence of heat interactions is a consequence of the first ...