Journal of Energy Resources Technology: Recent submissions
Now showing items 1501-1520 of 3450
-
Performance and Emission Characteristics of Diesel Engine Using Alumina Nanoparticle Blended Biodiesel Emulsion Fuel
(The American Society of Mechanical Engineers (ASME), 2016)Diesel engines are widely used for their low fuel consumption and better efficiency. An investigation was carried out with a single cylinder diesel engine to establish the effects of alumina nanoparticle incorporation into ... -
Experimental Study on Identification Diffusion Pores, Permeation Pores and Cleats of Coal Samples
(The American Society of Mechanical Engineers (ASME), 2016)Coal pore systems can be commonly classified as diffusion pores, permeation pores and cleats. The classification accuracy influences the coalbed methane (CBM) migration processes from diffusion to permeation and then to ... -
Application of a Phenomenological Model for the Engine Out Emissions of Unburned Hydrocarbons in Driving Cycles
(The American Society of Mechanical Engineers (ASME), 2016)In this work, the application of a phenomenological model to determine engineout hydrocarbon (HC) emissions in driving cycles is presented. The calculation is coupled to a physicalbased simulation environment consisting ... -
Oil–Water Flow Pattern Transition Prediction in Horizontal Pipes
(The American Society of Mechanical Engineers (ASME), 2016)Flow pattern transition prediction models are presented for oil–water flow in horizontal pipes. The transition between stratified and nonstratified flow is predicted using Kelvin–Helmholtz (KH) stability analysis for ... -
Integrated Resource Mapping of Wave and Wind Energy
(The American Society of Mechanical Engineers (ASME), 2016)A common platform of wind and wave energy conversion should reduce upfront as well as maintenance costs relative to wave and offshore wind energy converters installed separately. For this cost reduction to happen, temporally ... -
A Comparison of Constraint and Constraint Potential Forms of the Rate Controlled Constraint Equilibrium Method
(The American Society of Mechanical Engineers (ASME), 2016)A comparative assessment is made of two implementations of the ratecontrolled constrainedequilibrium (RCCE) method. These are the constraint and constraint potential formulations in which rate equations are solved for the ... -
Predictive Modeling Techniques to Forecast Energy Demand in the United States: A Focus on Economic and Demographic Factors
(The American Society of Mechanical Engineers (ASME), 2016)Effective energy planning and governmental decisionmaking policies heavily rely on accurate forecast of energy demand. This paper discusses and compares five different forecasting techniques to model energy demand in the ... -
Thermodynamic Analysis of Hydraulic Braking Energy Recovery Systems for a Vehicle
(The American Society of Mechanical Engineers (ASME), 2016)In this study, a thermodynamic analysis of a hydraulic braking energy recovery system used in vehicles is performed for newly developed systems. The present system is related to the field of energy efficiency in vehicles. ... -
Development of the Rate Controlled Constrained Equilibrium Method for Modeling of Ethanol Combustion
(The American Society of Mechanical Engineers (ASME), 2016)The ratecontrolled constrainedequilibrium method (RCCE) has been further developed to model the combustion process of ethanol air mixtures. The RCCE is a reduction technique based on local maximization of entropy or ... -
Performance Assessment of an Aquifer Thermal Energy Storage System for Heating and Cooling Applications
(The American Society of Mechanical Engineers (ASME), 2016)This study presents energy and exergy analyses of aquifer thermal energy storage (ATES) integrated with a building heating and cooling system. In this regard, a typical bidirectional ATES integrated with a heat pump (HP) ... -
Numerical Study on Effects of Drilling Mud Rheological Properties on the Transport of Drilling Cuttings
(The American Society of Mechanical Engineers (ASME), 2016)Inaccurate prediction of the required pressures can lead to a number of costly drilling problems. In this study, the hydrodynamics of mudcuttings were numerically studied using the Mixture Model. To this end, an inhouse ... -
Solvent Selection Criteria and Optimal Application Conditions for Heavy Oil/Bitumen Recovery at Elevated Temperatures: A Review and Comparative Analysis
(The American Society of Mechanical Engineers (ASME), 2016)Sole thermal or solvent methods for heavyoil recovery are not effective enough to deliver cost efficient processes. Hybrid applications of those two techniques have been proposed to take advantage of each and a wide range ... -
Simulation of Adsorptive Storage of CO2 in Fixed Bed of MOF 5
(The American Society of Mechanical Engineers (ASME), 2016)Adsorptive storage of CO2 in a fixed bed is studied numerically. The simulation of an adsorption process of CO2 on a fixed bed has been carried out to evaluate the capacity of metalorganic framework novel materials (MOF5 ... -
Insight Into the Heel–Toe Effect of a Long Horizontal Wellbore Based on a Hybrid Numerical Method
(The American Society of Mechanical Engineers (ASME), 2016)Numerical simulation of flow inside a horizontal wellbore with multiple completion stages is presented. Using a hybrid method combining computational fluid dynamics and a lumped parameter model, blocking effect on the ... -
Uncertainty Quantification Using Streamline Based Inversion and Distance Based Clustering
(The American Society of Mechanical Engineers (ASME), 2016)For decision making, it is crucial to have proper reservoir characterization and uncertainty assessment of reservoir performances. Since initial models constructed with limited data have high uncertainty, it is essential ... -
Planning and Engineering Strategies to Mitigate Effects of Climate Change
(The American Society of Mechanical Engineers (ASME), 2016)Extreme weather events seem to have become more frequent with climate change. These anomalies throughout the world may generally be categorized as drought, heavy rain storms, landslides, heavy snow storms, sea level rise, ... -
Elastic Pipe Control and Compensation for Managed Pressure Drilling Under Sea Wave Heave Conditions
(The American Society of Mechanical Engineers (ASME), 2016)Managed pressure drilling (MPD) was developed as a group of technologies to more precisely control the annular pressure profile for which accuracy of the estimation of the bottomhole pressure is important. Particularly, ... -
The Use of Plug In Hybrid Electric Vehicles for Peak Shaving
(The American Society of Mechanical Engineers (ASME), 2016)This article is a feasibility analysis of using the batteries in plugin hybrid electric vehicles (PHEVs) for peak shaving. The analysis focuses on energy availability of the PHEV fleet as well as the financial savings to ... -
Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single Cylinder Compression Ignition Engine Using Endoscopic Imaging
(The American Society of Mechanical Engineers (ASME), 2016)Biofuels produced from nonedible sources that are cultivated on marginal lands represent a viable source of renewable and carbonneutral energy. In this context, biodiesel obtained from Jatropha and Karanja oil seeds have ... -
Smart Well Pattern Optimization Using Gradient Algorithm
(The American Society of Mechanical Engineers (ASME), 2016)For a long time, well pattern optimization mainly relies on human experience, numerical simulations are used to test different development plans and then a preferred program is chosen for field implementation. However, ...