Journal of Energy Resources Technology: Recent submissions
Now showing items 1521-1540 of 3450
-
Particulate Emissions From Karanja Biodiesel Fueled Turbocharged CRDI Sports Utility Vehicle Engine
(The American Society of Mechanical Engineers (ASME), 2015)Biodiesel has emerged as one of the most promising alternative fuel to mineral diesel in last two decades globally. Lower blends of biodiesel emit fewer pollutants, while easing pressure on scarce petroleum resources, ... -
Pressure Profile in Annulus: Solids Play a Significant Role
(The American Society of Mechanical Engineers (ASME), 2015)This paper looks into the effects of solids on the wellbore pressure profile under different conditions. An extensive number of experiments were conducted on a 90ftlong, 4.5 in. أ— 8 in. fullscale flow loop to simulate ... -
Application of Artificial Neural Network Particle Swarm Optimization Algorithm for Prediction of Asphaltene Precipitation During Gas Injection Process and Comparison With Gaussian Process Algorithm
(The American Society of Mechanical Engineers (ASME), 2015)Asphaltene precipitation is a major problem in the oil production and transportation of oil. Changes in pressure, temperature, and composition of oil can lead to asphaltene precipitation. In the case of gas injection into ... -
Feasibility of Waterflooding for a Carbonate Oil Field Through Whole Field Simulation Studies
(The American Society of Mechanical Engineers (ASME), 2015)The carbonate oil field studied is a currently producing field in U.S., which is named “PSU†field to remain anonymity. Discovered in 1994 with wells on natural flow or through artificial lift, this field had produced ... -
Induced Stress and Interaction of Fractures During Hydraulic Fracturing in Shale Formation
(The American Society of Mechanical Engineers (ASME), 2015)Creating complex fracture network by hydraulic fracturing operation in unconventional reservoir development is the key factor of effective exploitation. The mechanism of creating a fracture network is not clear up to today. ... -
Comparison Between RCCE and Shock Tube Ignition Delay Times at Low Temperatures
(The American Society of Mechanical Engineers (ASME), 2015)The ratecontrolled constrainedequilibrium (RCCE) method is a reduction technique based on local maximization of entropy or minimization of a relevant free energy at any time during the nonequilibrium evolution of the system ... -
Systematic Selection and Siting of Vehicle Fueling Infrastructure to Synergistically Meet Future Demands for Alternative Fuels
(The American Society of Mechanical Engineers (ASME), 2015)In order to meet the increasing demand for low carbon and renewable transportation fuels, a methodology for systematically establishing buildout scenarios is desirable. In an effort to minimize initial investment costs ... -
An Analytical Solution for Microannulus Cracks Developed Around a Wellbore
(The American Society of Mechanical Engineers (ASME), 2015)In situations like blowout or hydraulic fracturing, excessive fluid pressure may cause leaking in the casing in shallower parts of the formation. The resulting high pressure may form a cylindrical crack around the wellbore. ... -
Application of Real Time Field Data to Optimize Drilling Hydraulics Using Neural Network Approach
(The American Society of Mechanical Engineers (ASME), 2015)Realtime drilling optimization improves drilling performance by providing early warnings in operation Mud hydraulics is a key aspect of drilling that can be optimized by access to realtime data. Different from the investigated ... -
Study on Knock Characteristics of Dimethyl Ether Fueled Homogenous Charge Compression Ignition Direct Injection Combustion Engines
(The American Society of Mechanical Engineers (ASME), 2015)A twocylinder diesel engine was modified for a dimethyl ether (DME) homogeneous charge compression ignition (HCCI)direct injection (DI) engine. Knock characteristics are investigated based on incylinder pressure signals. ... -
Ammonia and Gasoline Fuel Blends for Spark Ignited Internal Combustion Engines
(The American Society of Mechanical Engineers (ASME), 2015)Ammonia, when blended with hydrocarbon fuels, can be used as a composite fuel to power existing internal combustion (IC) engines. Feasibility of developing ammonia gasoline liquid fuel blends and the use of ethanol as an ... -
A Novel Inexact Two Stage Stochastic Robust Compensation Model for Electric Supply Environmental Management Under Uncertainty
(The American Society of Mechanical Engineers (ASME), 2015)In this study, a novel inexact twostage stochastic robustcompensation programming (ITSPRC) model is developed for CO2 emission reduction management under uncertainties. This model is attempted to integrate ITSP and stochastic ... -
Comparative Analysis of Different Configuration Domestic Refrigerators: A Computational Fluid Dynamics Approach
(The American Society of Mechanical Engineers (ASME), 2015)To reduce the tremendous increase in the energy consumption in the residential sector, there is a continuous need to improve the cooling efficiency and reduce running cost in domestic refrigerators. In this regard, three ... -
Numerical Shape Optimization of a Wind Turbine Blades Using Artificial Bee Colony Algorithm
(The American Society of Mechanical Engineers (ASME), 2015)Use of wind turbines is rapidly growing because of environmental impacts and daily increase in energy cost. Therefore, improving the wind turbines' characteristics is an important issue in this regard. This study has two ... -
Offshore Wind Foundation Design: Some Key Issues
(The American Society of Mechanical Engineers (ASME), 2015)Despite the growth of the offshore wind industry, there are currently doubts relating to the design of wind facilities in the sea. This paper expounds current, already identified structural uncertainties: problems for soil ... -
Optimum Performance Improvements of the Combined Cycle Based on an Intercooler–Reheated Gas Turbine
(The American Society of Mechanical Engineers (ASME), 2015)The performance enhancements and modeling of the gas turbine (GT), together with the combined cycle gas turbine (CCGT) power plant, are described in this study. The thermal analysis has proposed intercooler–reheatedGT ... -
Magnesium Hydride Slurry: A Better Answer to Hydrogen Storage
(The American Society of Mechanical Engineers (ASME), 2015)By storing hydrogen in an oilbased slurry with powdered magnesium hydride, inexpensive and safe hydrogen storage can be realized. This paper describes the characteristics and benefits of cycling hydrogen in and out of ... -
An Experimental Study of the Aerodynamics and Performance of a Vertical Axis Wind Turbine in a Confined and Unconfined Environment
(The American Society of Mechanical Engineers (ASME), 2015)This paper presents the results of a wide experimental study on an Htype vertical axis wind turbine (VAWT) carried out at the Politecnico di Milano. The experiments were carried out in a largescale wind tunnel, where wind ... -
Small Scale Wind Turbine Testing in Wind Tunnels Under Low Reynolds Number Conditions
(The American Society of Mechanical Engineers (ASME), 2015)Much of the aerodynamic design of wind turbines is accomplished using computational tools such as XFOIL. These codes are not robust enough for predicting performance under the low Reynolds numbers found with smallscale ... -
Optimizing Wind Turbine Efficiency by Deformable Structures in Smart Blades
(The American Society of Mechanical Engineers (ASME), 2015)This paper presents a method for optimizing blade designs in smart rotors; the objective is to maximize power regardless of wind conditions. An extensive analysis of what is known as “smart blades,†from aeronautical ...