Journal of Energy Resources Technology: Recent submissions
Now showing items 1461-1480 of 3450
-
Development of a Circular Thermoelectric Skutterudite Couple Using Compression Technology
(The American Society of Mechanical Engineers (ASME), 2016)Approximately, 55% of the energy produced from conventional vehicle resources is lost due to heat losses. An efficient waste heat recovery process will lead to improved fuel efficiency and greenhouse gas emissions. ... -
The Challenge of Energy Storage in Europe: Focus on Power to Fuel
(The American Society of Mechanical Engineers (ASME), 2016)The energy sector in the European market has been changing significantly over the last years. European Union (EU) energy strategy includes the EU lowcarbon roadmap milestone, which indicates for 2020, a 20% reduction in ... -
Soft Analyzer for Monitoring NOx Emissions From a Gas Turbine Combustor
(The American Society of Mechanical Engineers (ASME), 2016)Many industrial sectors built cogeneration plants to secure their power supplies reliably and to efficiently produce the plant demand of steam through the associated heat. Due to the rise of fuel cost and tightening ... -
Mechanistic Modeling For Size Selective Removal of Fines or Crystals From Thin Beds
(The American Society of Mechanical Engineers (ASME), 2016)Recently developed laboratory and numerical techniques reveal that the very thin, nearwall (assumed) “laminar†fluid layer, an essential feature of all turbulent flow conditions, houses a world of identifiable jetlike ... -
Evaluation of Rock Mechanical Properties Alteration During Matrix Stimulation With Chelating Agents
(The American Society of Mechanical Engineers (ASME), 2016)Well stimulation using acidic solutions is widely used to treat carbonate formations. The acidic fluids remove the nearwellbore damage and create channels around the wellbore by dissolving fraction of the carbonate rocks. ... -
Efficient Particle Swarm Optimization of Well Placement to Enhance Oil Recovery Using a Novel Streamline Based Objective Function
(The American Society of Mechanical Engineers (ASME), 2016)One of the main reservoir development plans is to find optimal locations for drilling new wells in order to optimize cumulative oil recovery. Reservoir simulation is a necessary tool to study different configurations of ... -
Characterizing Tight Oil Reservoirs With Dual and Triple Porosity Models
(The American Society of Mechanical Engineers (ASME), 2016)The response of existing transient tripleporosity models for fractured horizontal wells do not converge to that of linear dualporosity model (DPM) in the absence of natural/microfractures (MFs). The main reason is the ... -
Effect on Fracture Pressure by Adding Iron Based and Calcium Based Nanoparticles to a Nonaqueous Drilling Fluid for Permeable Formations
(The American Society of Mechanical Engineers (ASME), 2016)This paper presents a comprehensive experimental evaluation to investigate the effects of adding ironbased and calciumbased nanoparticles (NPs) to nonaqueous drilling fluids (NAFs) as a fluid loss additive and for wellbore ... -
Study on Pore Structure of Seaweed Particles After Combustion
(The American Society of Mechanical Engineers (ASME), 2016)In this work, the particles of two seaweeds, Enteromorpha clathrata (E. clathrata) (EN) and Sargassum natans (S. natans), were combusted in a fluidized bed. It was found that while combustion of EN particles was stable, ... -
An Optimization Framework for Decision Making in Large, Collaborative Energy Supply Systems
(The American Society of Mechanical Engineers (ASME), 2016)As demand for electricity in the U.S. continues to increase, it is necessary to explore the means through which the modern power supply system can accommodate both increasing affluence (which is accompanied by increased ... -
Anisotropic Inhomogeneous Poroelastic Inclusions: With Application to Underground Energy Related Problems
(The American Society of Mechanical Engineers (ASME), 2016)Understanding the stress change in a reservoir generated by fluid production/injection is important for field development purposes. In this paper, we provide the Eshelby solution for stress and strain distribution inside ... -
Chemical Looping Combustion of Hard Coal: Autothermal Operation of a 1 MWth Pilot Plant
(The American Society of Mechanical Engineers (ASME), 2016)Chemicallooping combustion (CLC) is an emerging carbon capture technology that is characterized by a low energy penalty, low carbon dioxide capture costs, and low environmental impact. To prevent the contact between fuel ... -
Performance Characterization of a Capacitive Deionization Water Desalination System With an Intermediate Solution and Low Salinity Water
(The American Society of Mechanical Engineers (ASME), 2016)In recent years, more efforts have been made to improve new and more efficient nonmembranebased methods for water desalination. Capacitive deionization (CDI), a novel technique for water desalination using an electric field ... -
Temperature Measurement Using Infrared Spectral Band Emissions From H2O
(The American Society of Mechanical Engineers (ASME), 2016)Currently, there is no satisfactory method for measuring the temperature of the gas phase of combustion products within a solid fuel flame. The industry standard, a suction pyrometer or aspirated thermocouple, is intrusive, ... -
Exergy, Energy, and Gas Flow Analysis of Hydrofractured Shale Gas Extraction
(The American Society of Mechanical Engineers (ASME), 2016)The objectives of this study are to (a) evaluate the exergy and energy demand for constructing a hydrofractured shale gas well and determine its typical exergy and energy returns on investment (ExROI and EROI), and (b) ... -
On a Scale Invariant Model of Statistical Mechanics and the Laws of Thermodynamics
(The American Society of Mechanical Engineers (ASME), 2016)A scaleinvariant model of statistical mechanics is applied to describe modified forms of zeroth, first, second, and third laws of classical thermodynamics. Following Helmholtz, the total thermal energy of the thermodynamic ... -
Global Goals and Contributing Disciplines in Higher Education, With a Focus on Sustainable Engineering
(The American Society of Mechanical Engineers (ASME), 2016)This work has been done to recognize the various contributing disciplines in colleges and universities to achieving the global goals. One aim is to point out the many college disciplines internationally that would contribute ... -
The Effect of Viscosity on Low Concentration Particle Transport in Single Phase (Liquid) Horizontal Pipes
(The American Society of Mechanical Engineers (ASME), 2016)Particle transport has been an active area of research for many years. Despite many excellent experimental and modeling studies contributing to the fundamental understanding of particle transport, the effect of viscosity ... -
Effect of Evaporation Temperature on the Performance of Organic Rankine Cycle in Near Critical Condition
(The American Society of Mechanical Engineers (ASME), 2016)Considering the large variations of working fluid's properties in nearcritical region, this paper presents a thermodynamic analysis of the performance of organic Rankine cycle in nearcritical condition (NORC) subjected to ... -
Integrated Experimental and Analytical Wellbore Strengthening Solutions by Mud Plastering Effects
(The American Society of Mechanical Engineers (ASME), 2016)Wellbore stability has plagued oil industry for decades. Inclusion of the mud in drilling and the effect of mud cake build up incorporate very complex chemical, thermal, mechanical, and physical phenomena. It is very ...