Journal of Energy Resources Technology: Recent submissions
Now showing items 1441-1460 of 3450
-
Large Eddy Simulation of High Reynolds Number Nonreacting and Reacting JP 8 Sprays in a Constant Pressure Flow Vessel With a Detailed Chemistry Approach
(The American Society of Mechanical Engineers (ASME), 2016)In military propulsion applications, the characterization of internal combustion engines operating with jet fuel is vital to understand engine performance, combustion phasing, and emissions when JP8 is fully substituted ... -
Determination of Flow Units in Carbonate Reservoir With Multiscale Karst Morphology
(The American Society of Mechanical Engineers (ASME), 2016)The Tahe reservoir, one of the largest scale carbonate reservoirs in western China, has very special cavities and fractures. The size of the cavities ranges from millimeter to meter scale, and the size of the fractures ... -
Intelligent Classifier Approach for Prediction and Sensitivity Analysis of Differential Pipe Sticking: A Comparative Study
(The American Society of Mechanical Engineers (ASME), 2016)Prediction of differential pipe sticking (DPS) prior to occurrence, and taking preventive measures, is one of the best approaches to minimize the risk of DPS. In this paper, probabilistic artificial neural network (ANN) ... -
Thermodynamic Analysis of a Novel Space Heating System Featuring Hot Gas Water Technology
(The American Society of Mechanical Engineers (ASME), 2016)Low operating cost, comfort, sustainability, and environmental footprint are the key elements of robust space heating (SH) system. In quest for higher efficiencies, it is not always possible to meet all of these demands ... -
Investigation of Gasification Reaction of Pulverized Char Under N2/CO2 Atmosphere in a Small Scale Fluidized Bed Reactor
(The American Society of Mechanical Engineers (ASME), 2016)A method for the experimental investigation of gas–solid reactions in a smallscale fluidized bed reactor (FBR) is presented. This methodology enables high heating rates (≈104 K/s), long timescale observation (up to ... -
Viscous Dissipation Effect on Streamwise Entropy Generation of Nanofluid Flow in Microchannel Heat Sinks
(The American Society of Mechanical Engineers (ASME), 2016)The effects of viscous dissipation on the entropy generation of water–alumina nanofluid convection in circular microchannels subjected to exponential wall heat flux are investigated. Closedform solutions of the temperature ... -
Maximum Wave Energy Conversion by Two Interconnected Floaters
(The American Society of Mechanical Engineers (ASME), 2016)Interconnected floaters could use relative rotations around connection joints to drive a power takeoff (PTO) system, such that the ocean wave energy can be converted into a useful energy. In this paper, our attention is ... -
Large Eddy Simulation of an n Dodecane Spray Flame Under Different Ambient Oxygen Conditions
(The American Society of Mechanical Engineers (ASME), 2016)An ndodecane spray flame was simulated using a dynamic structure largeeddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasisteady state flame ... -
Comprehensive Study of Steam Reforming of Methane in Membrane Reactors
(The American Society of Mechanical Engineers (ASME), 2016)A 2D model and heat transfer mechanism are proposed to analyze and study oxidative steam reforming of methane (OSRM) in a membrane reactor. The model describes mass and thermal dispersions for gas and solid phases. It also ... -
The Current Trends in Conventional Power Plant Technology on Two Continents From the Perspective of Engineering, Procurement, and Construction Contractor and Original Equipment Manufacturer
(The American Society of Mechanical Engineers (ASME), 2016)In terms of CO2 emissions, the year 2030 has been addressed as a very crucial deadline for both European Union (EU) and the U.S. Whereas the U.S. Clean Power Plan proposes the reduction of national CO2 emissions from the ... -
A Measurement Device for Online Monitoring of Total Tar in Gasification Systems
(The American Society of Mechanical Engineers (ASME), 2016)Tars produced during the thermal conversion of coal or especially biomass is one of the major obstacles for the application of gasification systems. They limit the use of the producer gas in engines or turbines or, in ... -
A New Subgrid Model for the Heat and Mass Transfer Between a Hot Gas and Char Particles in Dense Bed Reactors
(The American Society of Mechanical Engineers (ASME), 2016)This work is devoted to the development and verification of a new intrinsicbased subgrid model for moving char particles gasifying in a hot flue gas or syngas environments consisting of CO2/H2O/CO species. The distinguishing ... -
Physicochemical Characterization and Pyrolysis Kinetic Study of Sugarcane Bagasse Using Thermogravimetric Analysis
(The American Society of Mechanical Engineers (ASME), 2016)The present study was conducted to investigate the physicochemical properties and pyrolysis kinetics of sugarcane bagasse (SB). The physiochemical properties of SB were determined to examine its potential for pyrolysis. ... -
Numerical Simulations of Hollow Cone Injection and Gasoline Compression Ignition Combustion With Naphtha Fuels
(The American Society of Mechanical Engineers (ASME), 2016)Gasoline compression ignition (GCI), also known as partially premixed compression ignition (PPCI) and gasoline direct injection compression ignition (GDICI), engines have been considered an attractive alternative to ... -
Multi Objective Optimization of a Steam Surface Condenser Using the Territorial Particle Swarm Technique
(The American Society of Mechanical Engineers (ASME), 2016)The multiobjective territorial particle swarm optimization (MOTPSO) technique is proposed in this work for the optimal design of steam surface condensers. The main objective of this work is to maximize the condensation ... -
Development of a New Model for Carbonate Matrix Acidizing to Consider the Effects of Spent Acid
(The American Society of Mechanical Engineers (ASME), 2016)Carbonate matrix acidizing is widely used in oil fields as a simple and easy method of production enhancement. However, the dissolution pattern created due to the reaction between the acid and the carbonates is a complex ... -
Development of a Stiffness Based Chemistry Load Balancing Scheme, and Optimization of Input/Output and Communication, to Enable Massively Parallel High Fidelity Internal Combustion Engine Simulations
(The American Society of Mechanical Engineers (ASME), 2016)A closedcycle gasoline compression ignition (GCI) engine simulation near top dead center (TDC) was used to profile the performance of a parallel commercial engine computational fluid dynamics (CFD) code, as it was scaled ... -
Temperature of Food and Drink Intake Matters
(The American Society of Mechanical Engineers (ASME), 2016)The U.S. Government determines the guidelines for daily diet of humans in their various life stages. The current guidelines for caloric intake are about 2800 cal daily for the adult male, and about 600 cal less for the ... -
Reaction Kinetics of Pressurized Entrained Flow Coal Gasification: Computational Fluid Dynamics Simulation of a 5 MW Siemens Test Gasifier
(The American Society of Mechanical Engineers (ASME), 2016)Modeling pressurized entrained flow gasification of solid fuels plays an important role in the development of integrated gasification combined cycle (IGCC) power plants and other gasification applications. A better ... -
Diesel Like Efficiency Using Compressed Natural Gas/Diesel Dual Fuel Combustion
(The American Society of Mechanical Engineers (ASME), 2016)The use of natural gas in compression ignition (CI) engines as a supplement to diesel under dualfuel combustion mode is a promising technique to increase efficiency and reduce emissions. In this study, the effect of dualfuel ...