Journal of Energy Resources Technology: Recent submissions
Now showing items 1041-1060 of 3450
-
Improved Model of an Intermediate Point Enthalpy Control System for Enhancing Boiler Efficiency
(The American Society of Mechanical Engineers (ASME), 2019)Control quality of an once-through boiler’s water-fuel ratio (WFR) and main-steam temperature are heavily influenced by the control quality of the once-through boiler’s intermediate point enthalpy (IPE), and it is also ... -
Production of Synthetic Natural Gas From Carbon Dioxide and Renewably Generated Hydrogen: A Techno-Economic Analysis of a Power-to-Gas Strategy
(The American Society of Mechanical Engineers (ASME), 2019)Power-to-gas to energy systems are of increasing interest for low carbon fuels production and as a low-cost grid-balancing solution for renewables penetration. However, such gas generation systems are typically focused on ... -
Performance Analysis of Integrated Solar Tower With a Conventional Heat and Power Co-Generation Plant
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents the results of a thermo-economic analysis of integrating solar tower (ST) with heat and power cogeneration plants that is progressively being installed to produce heat and electricity to operate absorption ... -
Rate-Controlled Constrained-Equilibrium Application in Shock Tube Ignition Delay Time Simulation
(The American Society of Mechanical Engineers (ASME), 2019)The rate-controlled constrained-equilibrium (RCCE), a model order reduction method, assumes that the nonequilibrium states of a system can be described by a sequence of constrained-equilibrium kinetically controlled by ... -
Reviewer's Recognition
(The American Society of Mechanical Engineers (ASME), 2019) -
Surge Pressure in Conduits Containing Non-Newtonian Drilling Fluids: A Comparative Study on Impact of In Situ Thermal Conditions, Salinity, and Measurement Apparatus
(The American Society of Mechanical Engineers (ASME), 2019)Surge and swab pressure are two well-known parameters limiting velocity of pipe movement in various drilling operations. The detailed information about the effect of thermal conditions, fluid properties, and measurement ... -
Analysis of Multiphase Reservoir Production From Oil/Water Systems Using Rescaled Exponential Decline Models
(The American Society of Mechanical Engineers (ASME), 2019)In this study, we present an analytical approach based on rescaled exponential models that are able to analyze production data from oil/water systems producing under boundary-dominated flow conditions. The model is derived ... -
Numerical Simulation and Experimental Study of Cuttings Transport in Narrow Annulus
(The American Society of Mechanical Engineers (ASME), 2019)With the development of petroleum industry, it needs an efficient drill method such as under balanced drilling (UBD) to enhance the rate of penetration (ROP). However, borehole instability is a problem that UBD must face. ... -
Synergistic Inhibition Effect of Organic Salt and Polyamine on Water-Sensitive Shale Swelling and Dispersion
(The American Society of Mechanical Engineers (ASME), 2019)Drilling fluid with strong inhibition performance is crucial in drilling water-sensitive shale formations. An organic salt compound and polyamine were tested for their ability to inhibit shale swelling and dispersion, both ... -
Understanding the Effect of Capacitive Discharge Ignition on Plasma Formation and Flame Propagation of Air–Propane Mixture
(The American Society of Mechanical Engineers (ASME), 2019)This work is an experimental and computational study to investigate the effect of capacitive discharge ignition (CDI) on plasma kernel formation and flame propagation of air–propane mixture. This paper is mainly focused ... -
Exergy Optimization of a Novel Combination of a Liquid Air Energy Storage System and a Parabolic Trough Solar Collector Power Plant
(The American Society of Mechanical Engineers (ASME), 2019)In this paper, a parabolic trough solar collector (PTSC) plant is combined with a liquid air energy storage (LAES) system. The genetic algorithm (GA) is used to optimize the proposed system for different air storage mass ... -
Evaluating the Impact of Free-Stream Turbulence on Convective Cooling of Overhead Conductors Using Large Eddy Simulations
(The American Society of Mechanical Engineers (ASME), 2019)The international trend of using renewable energy sources for generating electricity is increasing, partly through harvesting energy from wind turbines. Increasing electric power transmission efficiency is achievable through ... -
Influence of Swirl and Primary Zone Airflow Rate on the Emissions and Performance of a Liquid-Fueled Gas Turbine Combustor
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents the results of an experimental study on the influence of swirl number (S) and primary zone airflow rate on the temperature, emission indices of the pollutants, and combustion efficiency in an atmospheric ... -
Enhanced History Matching of Gas Reservoirs With an Aquifer Using the Combination of Discrete Cosine Transform and Level Set Method in ES-MDA
(The American Society of Mechanical Engineers (ASME), 2019)Reservoir characterization is a process to make dependable reservoir models using available reservoir information. There are promising ensemble-based methods such as ensemble Kalman filter (EnKF), ensemble smoother (ES), ... -
Produced Water Re-Injection and Disposal in Low Permeable Reservoirs
(The American Society of Mechanical Engineers (ASME), 2019)Produced water re-injection (PWRI) is an important economic and environmental-friendly option to convert waste to value with waterflooding operations. However, it often causes rapid injectivity decline. In the present ... -
Critical Review of Stabilized Nanoparticle Transport in Porous Media
(The American Society of Mechanical Engineers (ASME), 2019)Over the past few decades, due to the special features (i.e., easily produced, large-surface-area-to-volume ratio, and engineered particles with designed surface properties), nanoparticles have not only attracted great ... -
Application of Low-Temperature Phase Change Materials to Enable the Cold Weather Operability of B100 Biodiesel in Diesel Trucks
(The American Society of Mechanical Engineers (ASME), 2019)The use of B100 biodiesel for compression ignition engines during the winter poses a challenge due to gelling and plugging of engine filters and fuel lines. The most common method to prevent this issue is blending it with ... -
A Rainbow Piezoelectric Energy Harvesting System for Intelligent Tire Monitoring Applications
(The American Society of Mechanical Engineers (ASME), 2019)Intelligent tires can be used in autonomous vehicles to insure the vehicle safety by monitoring the tire and tire-road conditions using sensors embedded on the tire. These sensors and their wireless communication systems ... -
Performance Prediction and Optimization of an Organic Rankine Cycle Using Back Propagation Neural Network for Diesel Engine Waste Heat Recovery
(The American Society of Mechanical Engineers (ASME), 2019)This paper presents a methodology to predict and optimize performance of an organic Rankine cycle (ORC) using a back propagation neural network (BPNN) for diesel engine waste heat recovery. A test bench of an ORC with a ... -
Potential Impacts of Net-Zero Energy Buildings With Distributed Photovoltaic Power Generation on the U.S. Electrical Grid
(The American Society of Mechanical Engineers (ASME), 2019)This study evaluates the potential aggregate effects of net-zero energy building (NZEB) implementations on the electrical grid in a simulation-based analysis. To estimate the impact of NZEBs on the electrical grid, a ...