Now showing items 3141-3160 of 5605

    • Customized Wavelet for Bearing Defect Detection 

      Brian T. Holm-Hansen; Li Zhang; Robert X. Gao; ASME Mem. (The American Society of Mechanical Engineers (ASME), 2004)
      This paper presents a new, structural dynamics-based wavelet transformation technique for bearing defect detection. Specifically, a customized wavelet was developed analytically, using the scaling ...
    • Analysis of Friction-Induced Limit Cycling in an Experimental Drill-String System 

      N. Mihajlović; A. A. van Veggel; N. van de Wouw; H. Nijmeijer (The American Society of Mechanical Engineers (ASME), 2004)
      In this paper, we aim for an improved understanding of the causes for torsional vibrations that appear in rotary drilling systems used for the exploration of oil and gas. For this purpose, ...
    • Discrete Sliding-Mode Tracking Control of High-Displacement Piezoelectric Actuator Systems 

      Chih-Lyang Hwang; Yung-Ming Chen (The American Society of Mechanical Engineers (ASME), 2004)
      We consider the modeling and control of a high-displacement piezoelectric actuator system (HDPAS). An HDPAS includes a multilayer LVPZT bender actuator (MLBA) and a low-pass filter. The MLBA is ...
    • An Identification Method With Direct Acquisition of Reduced Order Model From a Steplike Response 

      Manabu Kosaka; Hiroshi Shibata; Hiroshi Uda (The American Society of Mechanical Engineers (ASME), 2004)
      In this paper, we propose a deterministic off-line identification method performed by using input and output data with a constant steady-state output response. The method can directly acquire ...
    • Simultaneous Optimal Distribution of Lateral and Longitudinal Tire Forces for the Model Following Control 

      Ossama Mokhiamar; Masato Abe (The American Society of Mechanical Engineers (ASME), 2004)
      This paper presents a proposed optimum tire force distribution method in order to optimize tire usage and find out how the tires should share longitudinal and lateral forces to achieve a ...
    • Track Tension Controller Design and Experimental Evaluation in Tracked Vehicles 

      Kunsoo Huh; Chung Choo Chung; I. M. Kim; Mun-suk Suh; Senior Researcher (The American Society of Mechanical Engineers (ASME), 2004)
      Track tension is closely related to the maneuverability of tracked vehicles and the durability of their tracks and suspension systems. The tension needs to be maintained at an optimum level ...
    • Vibration Control of an ER Seat Suspension for a Commercial Vehicle 

      S. B. Choi; Y. S. Lee; M. S. Han; J. H. Choi (The American Society of Mechanical Engineers (ASME), 2003)
      This paper presents a semi-active seat suspension with an electrorheological (ER) fluid damper. A cylindrical ER seat damper is devised on the basis of a Bingham model of an arabic gum-based ...
    • Reducing the Impact of False Alarms in Induction Motor Fault Diagnosis 

      Kyusung Kim; Alexander G. Parlos (The American Society of Mechanical Engineers (ASME), 2003)
      Early detection and diagnosis of incipient faults is desirable for on-line condition assessment, product quality assurance, and improved operational efficiency of induction motors. At the same ...
    • Robust Tracking Control of a Piezoactuator Using a New Approximate Hysteresis Model 

      Meng-Shiun Tsai; Jin-Shin Chen (The American Society of Mechanical Engineers (ASME), 2003)
      A new approximate model, which consists of a variable gain and a variable time-delay, is proposed to describe the hysteresis behavior of a piezoactuator. The variable gain is assumed to be a ...
    • Effect of Mechanical Vibrations on Coriolis Mass Flow Meters 

      Robert Cheesewright; Ali Belhadj; Colin Clark (The American Society of Mechanical Engineers (ASME), 2003)
      An analytical study of the response of a simple Coriolis meter subjected to external mechanical vibrations and corresponding finite element studies of three commercially available meters are ...
    • Load Haul Dump Vehicle Kinematics and Control 

      Peter Ridley; Peter Corke (The American Society of Mechanical Engineers (ASME), 2003)
      This paper examines the kinematics and control of a Load Haul Dump Vehicle used in underground mining operations. The aim of the work is to develop an autonomous guidance strategy. A linear, ...
    • A Message From the Special Issue Editor 

      Prof. Nejat Olgac; Guest Editor (The American Society of Mechanical Engineers (ASME), 2003)
      Time delay in dynamic systems has long been considered a complex phenomenon. One can see increased research activity on this topic since the early 1980s, and primarily from the mathematics ...
    • Linear Robust Control of Identified Nonlinear Inverse Compensated SI Engine 

      A. P. Petridis; A. T. Shenton (The American Society of Mechanical Engineers (ASME), 2003)
      A technique based on Horowitz’s nonlinear quantitative feedback theory is presented, in which the size of the uncertainty is reduced by cancellation of the plant nonlinearity through nonlinear ...
    • Fuzzy-Chip-Based Control and Its Application to Adaptive Machining 

      Xifan Yao (The American Society of Mechanical Engineers (ASME), 2003)
      The use of fuzzy chip to implement the control of machining processes is investigated. The hardware solution can process rules in fuzzy controllers at high speed. In this paper, fuzzy-chip-based ...
    • Fuzzy Controller Design via the Inverse Solution of Lyapunov Equations 

      Wen-Jer Chang (The American Society of Mechanical Engineers (ASME), 2003)
      In this paper, a fuzzy control design method is be developed for the plant model whose structure is represented by the Takagi-Sugeno fuzzy model. In each rule of the Takagi-Sugeno fuzzy model, ...
    • Analysis of a System of Linear Delay Differential Equations 

      Farshid Maghami Asl; A. Galip Ulsoy (The American Society of Mechanical Engineers (ASME), 2003)
      A new analytic approach to obtain the complete solution for systems of delay differential equations (DDE) based on the concept of Lambert functions is presented. The similarity with the concept ...
    • Asymptotic Parameter Estimation via Implicit Averaging on a Nonlinear Extended System 

      Anindya Chatterjee; Joseph P. Cusumano (The American Society of Mechanical Engineers (ASME), 2003)
      We present an observer for parameter estimation in nonlinear oscillating systems (periodic, quasiperiodic or chaotic). The observer requires measurements of generalized displacements. It estimates ...
    • Constructive Filtering Algorithms for Delayed Systems With Uncertain Statistics 

      N. K. Ahmedova; Faculty of Mechanics and Mathematics; V. B. Kolmanovskii; A. I. Matasov; Faculty of Mechanics and Mathematics (The American Society of Mechanical Engineers (ASME), 2003)
      A stochastic optimal guaranteed estimation problem for dynamic delayed systems with uncertain statistics is considered. The solution of this problem reduces to a complex nonsmooth extremal problem. ...
    • Harmonic Disturbance Observer for Nonlinear Systems 

      Wen-Hua Chen (The American Society of Mechanical Engineers (ASME), 2003)
      A nonlinear harmonic disturbance observer for nonlinear systems subject to harmonics is designed and stability of the proposed observer is established using passivity approach. A systematic procedure ...
    • Control Techniques and Programming Issues for Time Delayed Internet Based Teleoperation 

      Saghir Munir; Wayne J. Book (The American Society of Mechanical Engineers (ASME), 2003)
      This article focuses on Internet-based real time control, such as remote bilateral teleoperation. In such applications, it is required that the control loop be closed through a time delayed ...