Journal of Heat Transfer: Recent submissions
Now showing items 3461-3480 of 3611
-
Simplified Two-Dimensional Analytical Model for Friction Stir Welding Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2008)A two-dimensional heat transfer problem pertaining to friction stir welding is developed by converting various pin tool configurations of interest to a simplified pin only configuration by assigning ... -
Modeling of the Adsorption Kinetics and the Convection of Surfactants in a Weld Pool
(The American Society of Mechanical Engineers (ASME), 2008)This paper presents a comprehensive three-dimensional, time-dependent model for simulating the adsorption kinetics and the redistribution of surfactants at the surface and in the bulk of a weld ... -
The Solid-State Neck Growth Mechanisms in Low Energy Laser Sintering of Gold Nanoparticles: A Molecular Dynamics Simulation Study
(The American Society of Mechanical Engineers (ASME), 2008)Molecular dynamics (MD) simulations were employed to investigate the mechanism and kinetics of the solid-state sintering of two crystalline gold nanoparticles (4.4–10.0nm) induced by low energy ... -
Patterns of Double-Diffusive Natural Convection With Opposing Buoyancy Forces: Comparative Study in Asymmetric Trapezoidal and Equivalent Rectangular Enclosures
(The American Society of Mechanical Engineers (ASME), 2008)The patterns arising from instabilities of double-diffusive natural convection due to vertical temperature T and solute concentration c gradients in confined enclosures are investigated numerically ... -
Thermal Contact Calibration Between a Thermocouple Probe and a Microhotplate
(The American Society of Mechanical Engineers (ASME), 2008)Since local thermal probing has become a major tool for studying transport phenomena at micro- and nanoscale levels, the fundamental aspect of the interaction between the tip of the probe and ... -
Experiments in Single-Phase Natural Circulation Miniloops With Different Working Fluids and Geometries
(The American Society of Mechanical Engineers (ASME), 2008)The aim of this work is to analyze experimentally the influence of geometrical parameters and fluid properties on the thermal performances of rectangular single-phase natural circulation miniloops, ... -
Ventilation of Wind-Permeable Clothed Cylinder Subject to Periodic Swinging Motion: Modeling and Experimentation
(The American Society of Mechanical Engineers (ASME), 2008)A theoretical and experimental study has been performed to determine the ventilation induced by swinging motion and external wind for a fabric-covered cylinder of finite length representing a ... -
An Analytical Model of External Streaming and Heat Transfer for a Levitated Flattened Liquid Drop
(The American Society of Mechanical Engineers (ASME), 2008)We present here the heat-transfer and fluid flow analysis of an acoustically levitated flattened disk-shaped liquid drop. The interest in this work arises from the noncontact measurement of the ... -
Artificial Neural Networks (ANNs): A New Paradigm for Thermal Science and Engineering
(The American Society of Mechanical Engineers (ASME), 2008)The use of artificial neural network (ANN), as one of the artificial intelligence methodologies, in a variety of real-world applications has been around for some time. However, the application ... -
Developments in Blood Perfusion Measurements Using the Forced Convection Approach
(The American Society of Mechanical Engineers (ASME), 2008)This paper reports on an investigation into the relationship between blood perfusion in the tissues of the limbs and thermal measurements at the skin surface during cooling under an array of ... -
Power Law Velocity and Temperature Profiles in a Fully Developed Turbulent Channel Flow
(The American Society of Mechanical Engineers (ASME), 2008)The power law temperature distribution in a fully developed turbulent channel flow for large Peclet numbers has been proposed in the present work. The analysis of the power law velocity profile ... -
Soret and Dufour Effects on Free Convection Heat and Mass Transfer From a Horizontal Flat Plate in a Darcy Porous Medium
(The American Society of Mechanical Engineers (ASME), 2008)The effect of Soret and Dufour parameters on free convection from a horizontal flat plate in a Darcian fluid saturated porous medium is analyzed using the similarity solution technique. With ... -
Assessment of the Single-Mixture Gas Assumption for the Correlated K-Distribution Fictitious Gas Method in H2O–CO2–CO Mixture at High Temperature
(The American Society of Mechanical Engineers (ASME), 2008)This paper deals with the comparison of spectral narrow band models based on the correlated-K (CK) approach in the specific area of remote sensing of plume signatures. The CK models chosen ... -
Heating and Ignition of Metal Particles in the Transition Heat Transfer Regime
(The American Society of Mechanical Engineers (ASME), 2008)This paper considers the heating and ignition of small metallic particles in hot gases for a range of Knudsen numbers, for which the continuum description of heat transfer is not valid. ... -
Two-Phase Flow Simulation of Mist Film Cooling on Turbine Blades With Conjugate Internal Cooling
(The American Society of Mechanical Engineers (ASME), 2008)Effective cooling of gas turbine combustor liners, combustor transition pieces, turbine vanes (nozzles), and blades (buckets) is a critical task to protect these components from the flue gas at ... -
The Solution of Transient Radiative Transfer With Collimated Incident Serial Pulse in a Plane-Parallel Medium by the DRESOR Method
(The American Society of Mechanical Engineers (ASME), 2008)A time-dependent distribution of ratios of energy scattered by the medium or reflected by the boundary surfaces (DRESOR) method was proposed to solve the transient radiative transfer in a ... -
Modeling the Natural Convection Heat Transfer and Dryout Heat Flux in a Porous Debris Bed
(The American Society of Mechanical Engineers (ASME), 2008)An empirical model for natural convection heat transfer for film-boiling condition has been developed for volumetrically heated particulate debris beds when flooded with water at the top of the ... -
Flows Between Rotating Cylinders With a Porous Lining
(The American Society of Mechanical Engineers (ASME), 2008)Flow and temperature fields in an annulus between two rotating cylinders have been examined in this study. While the outer cylinder is stationary, the inner cylinder is rotating with a constant ... -
Effect of Velocity and Temperature Boundary Conditions on Convective Instability in a Ferrofluid Layer
(The American Society of Mechanical Engineers (ASME), 2008)A variety of velocity and temperature boundary conditions on the onset of ferroconvection in an initially quiescent ferrofluid layer in the presence of a uniform magnetic field is investigated. ... -
Measurement of the Thermal Conductivity and Heat Capacity of Freestanding Shape Memory Thin Films Using the 3ω Method
(The American Society of Mechanical Engineers (ASME), 2008)The 3ω method (17) is a powerful tool for thermophysical property measurement and has been used extensively for a wide variety of materials including dielectrics (18,33), superlattice materials ...