Journal of Heat Transfer: Recent submissions
Now showing items 3481-3500 of 3611
-
Experimental Study of a Curved Rotating Heat Pipe
(The American Society of Mechanical Engineers (ASME), 2008)A curved rotating heat pipe for use in motor and generator applications is studied experimentally. The heat pipe is built so that both the condenser and evaporator sections are parallel to ... -
Experimental Investigation on the Heat Transfer Between a Heated Microcantilever and a Substrate
(The American Society of Mechanical Engineers (ASME), 2008)This work describes the heat transfer process from a heated microcantilever to a substrate. A platinum-resistance thermometer with a 140nm width was fabricated on a SiO2-coated silicon substrate. ... -
Comparison of Two-Dimensional and Three-Dimensional Thermal Models of the LENS® Process
(The American Society of Mechanical Engineers (ASME), 2008)A new two-dimensional (2D) transient finite element model was developed to study the thermal behavior during the multilayer deposition by the laser engineered net shaping rapid fabrication process. ... -
Flow Boiling in Minichannels Under Normal, Hyper-, and Microgravity: Local Heat Transfer Analysis Using Inverse Methods
(The American Society of Mechanical Engineers (ASME), 2008)Boiling in microchannels is a very efficient mode of heat transfer since high heat and mass transfer coefficients are achieved. Here, the objective is to provide basic knowledge on the systems ... -
Modeling of Convective Cooling of a Rotating Disk by Partially Confined Liquid Jet Impingement
(The American Society of Mechanical Engineers (ASME), 2008)This paper presents the results of the numerical simulation of conjugate heat transfer during a semiconfined liquid jet impingement on a uniformly heated spinning solid disk of finite thickness ... -
High Performance Recuperator With Oblique Wavy Walls
(The American Society of Mechanical Engineers (ASME), 2008)A series of numerical simulation of the flow and heat transfer in modeled counterflow heat exchangers with oblique wavy walls has been made toward optimal shape design of recuperators. The ... -
Definition and Evaluation of Mean Beam Lengths for Applications in Multidimensional Radiative Heat Transfer: A Mathematically Self-Consistent Approach
(The American Society of Mechanical Engineers (ASME), 2008)A set of mathematically self-consistent definitions of mean beam length is introduced to account for surface-surface, surface-volume, and volume-volume radiative exchanges in general three-dimensional ... -
Multiobjective Optimization of a Microchannel Heat Sink Using Evolutionary Algorithm
(The American Society of Mechanical Engineers (ASME), 2008)A multiobjective performance optimization of microchannel heat sink is carried out numerically applying surrogate analysis and evolutionary algorithm. Design variables related to microchannel width, ... -
An Experimental Investigation of Sorption Process in Fluidized Bed With Cooling Pipe
(The American Society of Mechanical Engineers (ASME), 2008)An experimental investigation of a fluidized bed with multiple cooling pipes was conducted to study adsorption characteristics of a new organic sorbent desiccant material (HU300P) for a new air ... -
Simulation of Thermal Fluid Flow Transport in a Channel Containing Slot-Perforated Flat Plates
(The American Society of Mechanical Engineers (ASME), 2008)A numerical study is performed to investigate unsteady, two-dimensional, incompressible laminar flow over both sides of a slot-perforated flat surface in a pulsating channel flow. Consideration ... -
Thermal-Boundary-Layer Response to Convected Far-Field Fluid Temperature Changes
(The American Society of Mechanical Engineers (ASME), 2008)Fluid flows of varying temperature occur in heat exchangers, nuclear reactors, nonsteady-flow devices, and combustion engines, among other applications with heat transfer processes that influence ... -
Demonstration of Heat Transfer Enhancement Using Ferromagnetic Particle Laden Fluid and Switched Magnetic Fields
(The American Society of Mechanical Engineers (ASME), 2008)A convective heat transfer enhancement technique and the experimental methods used to quantify the improvement in heat transfer and subsequent differential pressure are introduced. The enhancement ... -
Small and Large Time Solutions for Surface Temperature, Surface Heat Flux, and Energy Input in Transient, One-Dimensional Conduction
(The American Society of Mechanical Engineers (ASME), 2008)This paper addresses one-dimensional transient conduction in simple geometries. It is well known that the transient thermal responses of various objects, or of an infinite medium surrounding such ... -
Fractal Model for Thermal Contact Conductance
(The American Society of Mechanical Engineers (ASME), 2008)A random number model based on fractal geometry theory is developed to calculate the thermal contact conductance (TCC) of two rough surfaces in contact. This study is carried out by geometrical ... -
Droplet and Bubble Dynamics in Saturated FC-72 Spray Cooling on a Smooth Surface
(The American Society of Mechanical Engineers (ASME), 2008)Droplet and bubble dynamics and nucleate heat transfer in saturated FC-72 spray cooling were studied using a simulation model. The spray cooling system simulated consists of three droplet fluxes ... -
Prediction of Thermal Emission and Exchange Among Neighboring Wavelength-Sized Spheres
(The American Society of Mechanical Engineers (ASME), 2008)An analysis of radiative emission and radiative exchange among an ensemble of closely spaced, wavelength-sized spheres, in which each sphere in the ensemble is at a distinct and uniform ... -
Simulation of Laser-Induced Incandescence Measurements in an Anisotropically Scattering Aerosol Through Backward Monte Carlo
(The American Society of Mechanical Engineers (ASME), 2008)Laser-induced incandescence (LII) measurements carried out in aerosols having a large particle volume fraction must be corrected to account for extinction between the energized aerosol particles ... -
Development of a Transparent Heater to Measure Surface Temperature Fluctuations Under Spray Cooling Conditions
(The American Society of Mechanical Engineers (ASME), 2008)A heater designed to monitor surface temperature fluctuations during pool boiling and spray cooling experiments while the bubbles are simultaneously being observed has been fabricated and tested. ... -
Unsteady Hydromagnetic Generalized Couette Flow of a Non-Newtonian Fluid With Heat Transfer Between Parallel Porous Plates
(The American Society of Mechanical Engineers (ASME), 2008)The unsteady magnetohydrodynamics flow of an electrically conducting viscous incompressible non-Newtonian Casson fluid bounded by two parallel nonconducting porous plates is studied with heat transfer ... -
Effects of Growth Temperature on Carbon Nanotube Array Thermal Interfaces
(The American Society of Mechanical Engineers (ASME), 2008)Due to their excellent compliance and high thermal conductivity, dry carbon nanotube (CNT) array interfaces are promising candidates to address the thermal management needs of power dense ...