Journal of Heat Transfer: Recent submissions
Now showing items 3441-3460 of 3611
-
Numerical Heat Transfer Optimization in Modular Systems of Y-Shaped Fins
(The American Society of Mechanical Engineers (ASME), 2008)This paper analyses the heat exchange behavior in systems characterized by Y-shaped fins through a numerical approach based on a CFD software. Starting from individual Y profiles, as optimized ... -
Flow Patterns During Convective Boiling in Microchannels
(The American Society of Mechanical Engineers (ASME), 2008) -
Inverse Heat Conduction Applied to the Measurement of Heat Fluxes on a Rotating Cylinder: Comparison Between an Analytical and a Numerical Technique
(The American Society of Mechanical Engineers (ASME), 2008)A method using either a one-dimensional analytical or a two-dimensional numerical inverse technique is developed for measurement of local heat fluxes at the surface of a hot rotating cylinder ... -
Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) Under High Rotation Numbers
(The American Society of Mechanical Engineers (ASME), 2008)This paper experimentally investigated the rotational effects on heat transfer in a two-pass rectangular channel (AR=1:4), which is applicable to the channel near the leading edge of the gas ... -
Visualization of Pressure in Microchannels
(The American Society of Mechanical Engineers (ASME), 2008) -
Enhancement of Thermohydraulic Performance of Turbulent Flow in Rectangular and Square Ribbed Ducts With Twisted-Tape Inserts
(The American Society of Mechanical Engineers (ASME), 2008)The thermohydraulic performance of turbulent flow of air through rectangular and square ribbed ducts with twisted-tape inserts has been experimentally studied. The performance is influenced by the ... -
Simultaneous Droplet Impingement Dynamics and Boiling Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2008) -
Freezing Damage of the Plasma Membrane of a Plant Cell
(The American Society of Mechanical Engineers (ASME), 2008) -
Short Time Impact and Cooling of Water Droplets Impinging on Hydrophobic and Hydrophilic Surfaces
(The American Society of Mechanical Engineers (ASME), 2008) -
Vertical Free Convective Boundary-Layer Flow in a Bidisperse Porous Medium
(The American Society of Mechanical Engineers (ASME), 2008)In this article, we study the effect of adopting a two-temperature and two-velocity model, appropriate to a bidisperse porous medium (BDPM), on the classical Cheng–Minkowycz study of vertical ... -
Logarithmic Expansions for Reynolds Shear Stress and Reynolds Heat Flux in a Turbulent Channel Flow
(The American Society of Mechanical Engineers (ASME), 2008)The heat and fluid flow in a fully developed turbulent channel flow have been investigated. The closure model of Reynolds shear stress and Reynolds heat flux as a function of a series of ... -
Erratum: “Magnetohydrodynamic Flow Past a Vertical Plate With Radiative Heat Transfer” [Journal of Heat Transfer, 2007, 129(12), pp. 1708–1713]
(The American Society of Mechanical Engineers (ASME), 2008)In this paper there were a number of errors that we have corrected below. -
Laminar Forced Convection for Flow Across a Cylinder With Longitudinal Fins of Finite Thickness
(The American Society of Mechanical Engineers (ASME), 2008)Conjugate numerical solution of laminar forced convection for cross-flow over a cylinder with external longitudinal fins of finite thickness has been carried out. The rate of heat transfer from ... -
Extreme Plane Wall Midplane Temperatures Due to Sequential Heating and Cooling
(The American Society of Mechanical Engineers (ASME), 2008)The thermal response of a one-dimensional plane wall to sequential heating and cooling is considered. Of interest is the thermal response at the midplane of the wall in terms of the extreme ... -
Pool Boiling on a Downward Facing Microheater Array Under the Influence of the Electric Fields
(The American Society of Mechanical Engineers (ASME), 2008) -
The Effect of a Transition Layer Between a Fluid and a Porous Medium: Forced Convection in a Channel
(The American Society of Mechanical Engineers (ASME), 2008)Flow in a three-layer channel is modeled analytically. The channel consists of a transition layer sandwiched between a porous medium and a fluid clear of solid material. Within the transition ... -
Experimental Study of Heat Conduction in Aqueous Suspensions of Aluminum Oxide Nanoparticles
(The American Society of Mechanical Engineers (ASME), 2008)We report measurements of the thermal conductivity of aqueous suspensions of aluminum oxide nanoparticles with nominal diameters of 20nm, 30nm, and 45nm and at volume concentrations up to 10%. ... -
Slip Flow Heat Transfer in Annular Microchannels With Constant Heat Flux
(The American Society of Mechanical Engineers (ASME), 2008)Microscale fluid dynamics has received intensive interest due to the emergence of microelectromechanical systems technology. When the mean free path of the gas is comparable to the channel’s ... -
Thin Film Phonon Heat Conduction by the Dispersion Lattice Boltzmann Method
(The American Society of Mechanical Engineers (ASME), 2008)Numerical simulations of time-dependent thermal energy transport in semiconductor thin films are performed using the lattice Boltzmann method applied to phonon transport. The discrete lattice ... -
Process Intensification in a “Simulated Moving-Bed” Heat Regenerator
(The American Society of Mechanical Engineers (ASME), 2008)The solid-gas contacting for thermal storage and thermal recovery is generally carried out in fixed-bed regenerators. Compared to a fixed bed, higher thermal recovery can be achieved in a moving ...