Journal of Heat Transfer: Recent submissions
Now showing items 3421-3440 of 3611
-
A Numerical and Analytical Study of Thermally Driven Combustion Oscillations in a Perfectly Stirred Reactor
(The American Society of Mechanical Engineers (ASME), 2008)The oscillatory behaviors of methane and hydrogen oxidation in a perfectly stirred reactor (PSR) are examined. The work explores the parameter spaces in which oscillatory combustion and ignition ... -
Calculation Method for Thermal-Hydraulic System Simulation
(The American Society of Mechanical Engineers (ASME), 2008)This paper presents the fundamental approaches of modeling thermal-hydraulic component briefly. A set of lumped parameter mathematical models is developed, which are based on conservation of mass ... -
Experimental Study on Fundamental Phenomena of Boiling Using Heat Transfer Surfaces With Well-Defined Cavities Created by MEMS (Effect of Spacing Between Cavities)
(The American Society of Mechanical Engineers (ASME), 2008)Pool nucleate boiling heat transfer experiments were performed for water using heat transfer surfaces having unified cavities. Cylindrical holes of 10μm in diameter and 40μm in depth were formed ... -
Efficiency and Effectiveness of Heat Exchanger Series
(The American Society of Mechanical Engineers (ASME), 2008)The concept of heat exchanger efficiency is extended to the heat exchanger networks. General expressions that can be used for determining the overall efficiency and effectiveness of heat exchangers ... -
Modeling of Thermophysical Processes in Liquid Ceramic Precursor Droplets Heated by Monochromatic Irradiation
(The American Society of Mechanical Engineers (ASME), 2008)A transient heat and mass transfer model is formulated to describe radiative heating of ceramic precursor droplets in a nonconvective environment. Heating causes vaporization of solvent from the ... -
Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels Under High Rotation Numbers
(The American Society of Mechanical Engineers (ASME), 2008)Heat transfer coefficients are experimentally measured in a rotating cooling channel used to model an internal cooling passage near the trailing edge of a gas turbine blade. The regionally ... -
Hybrid Full-Spectrum Correlated k-Distribution Method for Radiative Transfer in Nonhomogeneous Gas Mixtures
(The American Society of Mechanical Engineers (ASME), 2008)The full-spectrum k-distribution (FSK) approach is a promising model for radiative transfer calculations in participating media. FSK achieves line-by-line (LBL) accuracy for homogeneous media at a ... -
Exergy Analysis of Condensation of a Binary Mixture With One Noncondensable Component in a Shell and Tube Condenser
(The American Society of Mechanical Engineers (ASME), 2008)The exergy (second-law) efficiency is formulated for a condensation process in a shell and one-path tube exchanger for a fixed control volume. The exergy efficiency ηex is expressed as a ... -
Size Effect on the Thermal Conductivity of Thin Metallic Films Investigated by Scanning Joule Expansion Microscopy
(The American Society of Mechanical Engineers (ASME), 2008)A technique to extract in-plane thermal conductivity of thin metallic films whose thickness is comparable to electron mean free path is described. Microscale constrictions were fabricated into ... -
Particle Aspect-Ratio Effects on the Thermal Conductivity of Micro- and Nanoparticle Suspensions
(The American Society of Mechanical Engineers (ASME), 2008)The influence of particle anisotropy on the effective thermal conductivity of a suspension is experimentally investigated. Suspensions of micron-sized, silicon-carbide particles with varying aspect-ratio ... -
Infrared Radiative Properties of Submicron Metallic Slit Arrays
(The American Society of Mechanical Engineers (ASME), 2008)Submicron metallic slit arrays with different geometry were designed and fabricated on silicon substrates. Their infrared radiative properties (transmittance, reflectance, and absorptance) were ... -
Friction Numbers and Viscous Dissipation Heating for Laminar Flows of Water in Microtubes
(The American Society of Mechanical Engineers (ASME), 2008)The friction numbers for laminar flows of water in microtubes, determined from the temperature rise due to the viscous dissipation heating assuming a velocity slip, show a strong dependence on ... -
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
(The American Society of Mechanical Engineers (ASME), 2008)A detailed experimental and analytical study has been performed to evaluate how copper porous foam (CPF) enhances the heat transfer performance in a cylindrical solid/liquid phase change thermal ... -
Atomistic Visualization of Anisotropic Wave Propagation in Crystals
(The American Society of Mechanical Engineers (ASME), 2008)Presented here is a new molecular dynamics simulation approach for visualizing multidimensional acoustic wave-packet propagation in anisotropic materials. This approach allows examination of longitudinal ... -
Variable Physical Properties in Natural Convective Gas Microflow
(The American Society of Mechanical Engineers (ASME), 2008)Anisothermal flow prevails in a heated microchannel. It is desirable to understand the influence of temperature-dependent physical properties on the flow and heat transfer characteristics for ... -
Temperature Effects on Swarming Flagellated Bacteria in Microfluidic Environments
(The American Society of Mechanical Engineers (ASME), 2008) -
Heat Transport Capability in an Oscillating Heat Pipe
(The American Society of Mechanical Engineers (ASME), 2008)A mathematical model predicting the oscillating motion in an oscillating heat pipe is developed. The model considers the vapor bubble as the gas spring for the oscillating motions including ... -
Label-Free and Near-Field Mapping of Molecular Diffusion (Saline Solution/Water) Using Surface Plasmon Resonance (SPR) Refractive Index Field Imaging
(The American Society of Mechanical Engineers (ASME), 2008) -
A Multiscale Model of Thermal Contact Resistance Between Rough Surfaces
(The American Society of Mechanical Engineers (ASME), 2008)A new multiscale model of thermal contact resistance (TCR) between real rough surfaces is presented, which builds on Archard’s multiscale description of surface roughness. The objective of this ... -
Air-Water Ebullience Systems: Visualizing Single Bubble to Wave Instability Signatures
(The American Society of Mechanical Engineers (ASME), 2008)