Journal of Heat Transfer: Recent submissions
Now showing items 3401-3420 of 3611
-
An Interfacial Tracking Method for Ultrashort Pulse Laser Melting and Resolidification of a Thin Metal Film
(The American Society of Mechanical Engineers (ASME), 2008)An interfacial tracking method was developed to model rapid melting and resolidification of a freestanding metal film subject to an ultrashort laser pulse. The laser energy was deposited to the ... -
Analysis of the Thermal Behavior of a Multilayer Slab With Imperfect Contact Using the Dual-Phase-Lag Heat Conduction Model
(The American Society of Mechanical Engineers (ASME), 2008)The thermal behavior of a multilayered slab in imperfect contact using the dual-phase-lag heat conduction model is numerically analyzed, considering a range of heat flux-phase lag, temperature ... -
Two-Phase Convective Heat Transfer in Miniature Pipes Under Normal and Microgravity Conditions
(The American Society of Mechanical Engineers (ASME), 2008)Detailed numerical simulations have been performed to study the effect of flow orientation with respect to gravity on two-phase flow heat transfer (without phase change) in small diameter pipes. ... -
On the Numerical Modeling of the Thermomechanical Contact for Metal Casting Analysis
(The American Society of Mechanical Engineers (ASME), 2008)The paper shows the intrinsic difficulties found in the numerical simulation of industrial casting processes using finite element (FE) analysis. Up until now, uncoupled pure thermal simulations ... -
Heat Transfer Analysis Through Solar and Rooted Fins
(The American Society of Mechanical Engineers (ASME), 2008)Heat transfer through solar fins and rooted fins is analyzed theoretically in this work. The terminology of “solar fin” is used to refer to fins that are subject to external irradiations while ... -
Experimental and Analytical Studies of Reciprocating-Mechanism Driven Heat Loops (RMDHLs)
(The American Society of Mechanical Engineers (ASME), 2008)This paper conducts experimental and analytical studies of a novel heat-transfer device, reciprocating-mechanism driven heat loop (RMDHL) that facilitates two-phase heat transfer while eliminating ... -
Computational Study of Heat Transfer in a Conjugate Turbulent Wall Jet Flow at High Reynolds Number
(The American Society of Mechanical Engineers (ASME), 2008)In the present case, the conjugate heat transfer involving the cooling of a heated slab by a turbulent plane wall jet has been numerically solved. The bottom of the solid slab is maintained ... -
Performance of the Various Sn Approximations of DOM in a 3D Combustion Chamber
(The American Society of Mechanical Engineers (ASME), 2008)We have carried out a three-dimensional numerical study to investigate the radiative heat transfer in a model gas turbine combustor. The combustion chamber is a representative of the Rolls-Royce ... -
Instability of Nanofluids in Natural Convection
(The American Society of Mechanical Engineers (ASME), 2008)Instability of natural convection in nanofluids is investigated in this work. As a result of Brownian motion and thermophoresis of nanoparticles, the critical Rayleigh number is shown to be ... -
Effect of Pin Tip Clearance on Flow and Heat Transfer at Low Reynolds Numbers
(The American Society of Mechanical Engineers (ASME), 2008)Cylindrical pin fins with tip clearances are investigated in the low Reynolds number range 5<ReD<400 in a plane minichannel. Five tip gaps are investigated ranging from a full pin fin ... -
Application of Electrohydrodynamic Atomization to Two-Phase Impingement Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2008)The effect of electric fields applied to two-phase impingement heat transfer is explored for the first time. The electric field applied between a capillary tube and heated surface enhances the ... -
Numerical Experiments in Turbulent Natural Convection Using Two-Equation Eddy-Viscosity Models
(The American Society of Mechanical Engineers (ASME), 2008)This work is focused on the simulation and prediction of turbulent natural convection flows by means of two-equation eddy-viscosity models. In order to show the generality, precision, and numerical ... -
Critical Heat Flux of Water at Subatmospheric Pressures in Microchannels
(The American Society of Mechanical Engineers (ASME), 2008)Critical heat flux conditions for water at subatmospheric pressures in an array of silicon-based, 227μm hydraulic diameter, rectangular microchannels were experimentally studied. Experiments were ... -
Monte Carlo Simulation of Steady-State Microscale Phonon Heat Transport
(The American Society of Mechanical Engineers (ASME), 2008)Heat conduction in submicron crystalline materials can be well modeled by the Boltzmann transport equation (BTE). The Monte Carlo method is effective in computing the solution of the BTE. These ... -
Flow Boiling Instabilities in Microchannels and Means for Mitigation by Reentrant Cavities
(The American Society of Mechanical Engineers (ASME), 2008)The ability of reentrant cavities to suppress flow boiling oscillations and instabilities in microchannels was experimentally studied. Suppression mechanisms were proposed and discussed with respect ... -
Film Cooling Effectiveness Distribution on a Gas Turbine Blade Platform With Inclined Slot Leakage and Discrete Film Hole Flows
(The American Society of Mechanical Engineers (ASME), 2008)A five-blade, linear cascade is used to experimentally investigate turbine blade platform cooling. A 30deg inclined slot upstream of the blades is used to model the seal between the stator and ... -
A Numerical Study of Flow and Heat Transfer Between Two Rotating Spheres With Time-Dependent Angular Velocities
(The American Society of Mechanical Engineers (ASME), 2008)The transient motion and the heat transfer of a viscous incompressible fluid contained between two vertically eccentric spheres maintained at different temperatures and rotating about a common ... -
Steady State Performance of a Single Phase Natural Circulation Loop With End Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2008)In the present investigation, the steady state performance of a rectangular single phase natural circulation loop (NCL) with end heat exchangers is studied. One-dimensional governing equations are ... -
Laminar Filmwise Condensation on Horizontal Disk Embedded in Porous Medium With Suction at Wall
(The American Society of Mechanical Engineers (ASME), 2008)This study performs a theoretical investigation into the problem of two-dimensional steady filmwise condensation flow on a horizontal disk embedded in a porous medium layer with suction at the ... -
Heat Transfer Enhancement in Combined Convection Around a Horizontal Cylinder Using Nanofluids
(The American Society of Mechanical Engineers (ASME), 2008)Heat transfer enhancement in combined convection around a rotating horizontal cylinder using nanofluids is presented. The transport equations are solved numerically using a second-order finite ...