Journal of Heat Transfer: Recent submissions
Now showing items 3381-3400 of 3611
-
Heat Transfer Behavior of Silica Nanoparticles in Pool Boiling Experiment
(The American Society of Mechanical Engineers (ASME), 2008)The heat transfer characteristics of silica (SiO2) nanofluids at 0.5vol% concentration and particle sizes of 10nm and 20nm in pool boiling with a suspended heating Nichrome wire have been ... -
A Nonequilibrium Thermal Model for Rapid Heating and Pyrolysis of Organic Composites
(The American Society of Mechanical Engineers (ASME), 2008)A nonequilibrium thermal model is developed to predict the through-thickness transient temperature variation in organic composites subjected to intensive heating. In addition to heat conduction, ... -
Tube Transverse Pitch Effect on Heat/Mass Transfer Characteristics of Flat Tube Bank Fin Mounted With Vortex Generators
(The American Society of Mechanical Engineers (ASME), 2008)For one heat exchanger model of three-row flat tube bank fin mounted with vortex generators (VGs), the effect of transversal tube pitch on heat/mass transfer performance was investigated by the ... -
Heat Transfer Resulting From the Interaction of a Vortex Pair With a Heated Wall
(The American Society of Mechanical Engineers (ASME), 2008)The motion of a two-dimensional vortex pair moving toward a wall is studied numerically. The case for which the wall is heated is analyzed. The equations of momentum and energy conservation ... -
Influence of Interfacial Mixing on Thermal Boundary Conductance Across a Chromium/Silicon Interface
(The American Society of Mechanical Engineers (ASME), 2008)The thermal conductance at solid-solid interfaces is becoming increasingly important in thermal considerations dealing with devices on nanometer length scales. Specifically, interdiffusion or mixing ... -
Experimental and Theoretical Analysis of Transient Response of Plate Heat Exchangers in Presence of Nonuniform Flow Distribution
(The American Society of Mechanical Engineers (ASME), 2008)Transient analysis helps us to predict the behavior of heat exchangers subjected to various operational disturbances due to sudden change in temperature or flow rates of the working fluids. The ... -
Heat Transport Characteristics in a Miniature Flat Heat Pipe With Wire Core Wicks
(The American Society of Mechanical Engineers (ASME), 2008)A mathematical model predicting the heat transport capability in a miniature flat heat pipe (FHP) with a wired wick structure was developed to analytically determine its maximum heat transport ... -
Proposed Modification to Whole Domain Function Specification Method to Improve Accuracy of Its Estimations
(The American Society of Mechanical Engineers (ASME), 2008)This paper investigates the inverse heat transfer problem of laminar forced convection within a circular pipe. The performances of two classical algorithms used in the whole domain function ... -
On the Physics of Heat Transfer and Aerodynamic Behavior of Separated Flow Along a Highly Loaded Low Pressure Turbine Blade Under Periodic Unsteady Wake Flow and Varying of Turbulence Intensity
(The American Society of Mechanical Engineers (ASME), 2008)This paper attempts to provide a detailed insight into the heat transfer and aerodynamic behavior of a separation zone that is generated as a result of boundary layer development along the ... -
Thermal Properties of Metal-Coated Vertically Aligned Single-Wall Nanotube Arrays
(The American Society of Mechanical Engineers (ASME), 2008)Owing to their high thermal conductivities, carbon nanotubes (CNTs) are promising for use in advanced thermal interface materials. While there has been much previous research on the properties ... -
Correlating Equations for Laminar Free Convection From Misaligned Horizontal Cylinders in Interacting Flow Fields
(The American Society of Mechanical Engineers (ASME), 2008)Steady laminar free convection in air from a pair of misaligned, parallel horizontal cylinders, i.e., a pair of parallel cylinders with their axes set in a plane inclined with respect to the ... -
Bipolar Plate Thermal Response to PEM Fuel Cell Stack Compressive Load
(The American Society of Mechanical Engineers (ASME), 2008)This technical brief reports new findings regarding the strong relationship between the temperature of the bipolar plates of a proton exchange membrane fuel cell stack and thermal conditions ... -
Energy Separation in the Wake of a Cylinder
(The American Society of Mechanical Engineers (ASME), 2008)Energy separation is a spontaneous redistribution of total energy (enthalpy) in a fluid without external work or heat flow, resulting in some portion of fluid having higher total energy (enthalpy) ... -
Finite Difference Schemes for Diffusion Problems Based on a Hybrid Perturbation–Galerkin Method
(The American Society of Mechanical Engineers (ASME), 2008)A new technique for the development of finite difference schemes for diffusion equations is presented. The model equations are the one space variable advection diffusion equation and the two ... -
Investigation of Turbulent Flow and Heat Transfer in Periodic Wavy Channel of Internally Finned Tube With Blocked Core Tube
(The American Society of Mechanical Engineers (ASME), 2008)Three-dimensional complex turbulent flow and heat transfer of internally longitudinally finned tube with blocked core tube and streamwise wavy fin are numerically investigated. The numerical method ... -
Flow Boiling of R134a and R134a/Propane Mixtures at Low Saturation Temperatures Inside a Plain Horizontal Tube
(The American Society of Mechanical Engineers (ASME), 2008)Local heat transfer coefficients for flow boiling of pure 1,1,1,2-tetrafluoroethane (R134a) and binary mixtures of propane (R290) and R134a were measured. The experimental setup employed a vapor ... -
Heat Transfer in High-Speed Rotating Trapezoidal Duct With Rib-Roughened Surfaces and Air Bleeds From the Wall on the Apical Side
(The American Society of Mechanical Engineers (ASME), 2008)An experimental study of heat transfer in a radially rotating trapezoidal duct with two opposite walls roughened by 45deg staggered ribs and bleed from the apical side wall is performed. ... -
Thermal and Start-Up Characteristics of a Miniature Passive Liquid Feed DMFC System, Including Continuous/Discontinuous Phase Limitations
(The American Society of Mechanical Engineers (ASME), 2008)The thermal and start-up characteristics of a passive direct methanol fuel cell system are simulated using a numerical model. The model captures both the thermal characteristics of the fuel ... -
Simultaneous Retrieval of Total Hemispherical Emissivity and Specific Heat From Transient Multimode Heat Transfer Experiments
(The American Society of Mechanical Engineers (ASME), 2008)Transient cooling experiments of a heated vertical aluminum plate with an embedded heater, in quiescent air, were conducted for the simultaneous estimation of total hemispherical emissivity and ... -
An Experimental and Computational Heat Transfer Study of Pulsating Jets
(The American Society of Mechanical Engineers (ASME), 2008)Synthetic jets are meso or microscale fluidic devices, which operate on the “zero-net-mass-flux” principle. However, they impart a positive net momentum flux to the external environment and are ...