Journal of Heat Transfer: Recent submissions
Now showing items 3081-3100 of 3611
-
Measurement of Entropy Generation in Microscale Thermal-Fluid Systems
(The American Society of Mechanical Engineers (ASME), 2010)A new nonintrusive and whole field method for the measurement of entropy generation in microscale thermal-fluid devices is presented. The rate of entropy generation is a measure of the thermodynamic ... -
Heat Transfer Characteristics of Oscillating Heat Pipe With Water and Ethanol as Working Fluids
(The American Society of Mechanical Engineers (ASME), 2010)In this paper, experiments were conducted to achieve a better understanding of the oscillating heat pipe (OHP) operating behavior with water and ethanol as working fluid. The experimental results ... -
Analytical Solution to Nonlinear Thermal Diffusion: Kirchhoff Versus Cole–Hopf Transformations
(The American Society of Mechanical Engineers (ASME), 2010)The Kirchhoff transformation is the classical method of solution to the nonlinear thermal diffusion problem with temperature dependent properties. It essentially converts the nonlinear problem into ... -
Imaging of Surface-Tension-Driven Convection Using Liquid Crystal Thermography
(The American Society of Mechanical Engineers (ASME), 2010)Surface-tension forces can drive fluid motion within thin liquid layers with a free surface. Spatial variations in the temperature of the free surface create surface tractions that drive cellular ... -
An Experimental Investigation of Performance and Exergy Analysis of a Counterflow Vortex Tube Having Various Nozzle Numbers at Different Inlet Pressures of Air, Oxygen, Nitrogen, and Argon
(The American Society of Mechanical Engineers (ASME), 2010)An experimental investigation has been carried out to determine the thermal behavior of cooling fluid as it passes through a vortex tube and the effects of the orifice nozzle number and the ... -
Erratum: “A Novel Approach to Low Profile Heat Sink Design” [Journal of Heat Transfer, 2010, 132(9), p. 091401]
(The American Society of Mechanical Engineers (ASME), 2010)The error within this paper is in Eq. (1). The exponent on the square bracket term is given as 1/3 when it should be 1/m. The correct form of Eq. (1) is shown below including the text ... -
The Effects of Working Fluid on the Heat Transport Capacity of a Microheat Pipe
(The American Society of Mechanical Engineers (ASME), 2009)The effects of the thermophysical properties of the working fluid on the performance of a microheat pipe of triangular cross section are investigated. For this purpose, five different working ... -
Non-Newtonian Natural Convection Along a Vertical Heated Wavy Surface Using a Modified Power-Law Viscosity Model
(The American Society of Mechanical Engineers (ASME), 2009)Natural convection of non-Newtonian fluids along a vertical wavy surface with uniform surface temperature has been investigated using a modified power-law viscosity model. An important parameter ... -
Developing Nonthermal-Equilibrium Convection in Porous Media With Negligible Fluid Conduction
(The American Society of Mechanical Engineers (ASME), 2009)In certain contemporary technologies, porous media with high solid-phase conductivity are impregnated with low-conductivity fluids, e.g., metal and graphite foam cooled by air. For such cases, an ... -
Mixed Convection in a Vertical Microannulus Between Two Concentric Microtubes
(The American Society of Mechanical Engineers (ASME), 2009)In this study, fully developed mixed convective heat transfer of a Newtonian fluid in a vertical microannulus between two concentric microtubes is analytically investigated by taking the velocity ... -
A Vector Form Exchange-Area-Based Method for Computation of Anisotropic Radiative Transfer
(The American Society of Mechanical Engineers (ASME), 2009)Exchange-area-based methods (EAMs), such as the zonal method, the combined Monte-Carlo and zonal method, etc., are widely used in the numerical computation of thermal radiative transfer. In view ... -
Radiative Properties of Expanded Polystyrene Foams
(The American Society of Mechanical Engineers (ASME), 2009)Expanded polystyrene foams are one of the most widely used materials for a building’s thermal insulation. Owing to their very low density, a substantial proportion of the heat transfer is due ... -
Analytical Solution of Nonequilibrium Heat Conduction in Porous Medium Incorporating a Variable Porosity Model With Heat Generation
(The American Society of Mechanical Engineers (ASME), 2009)This paper is concerned with the conduction heat transfer between two parallel plates filled with a porous medium with uniform heat generation under a nonequilibrium condition. Analytical solution ... -
Effect of Temperature Ratio on Jet Array Impingement Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2009)This paper consider the effects of temperature ratio on the heat transfer from an array of jets impinging on a flat plate. At a constant Reynolds number of 18,000 and a constant Mach number ... -
The Efficient Iterative Solution of the P1 Equation
(The American Society of Mechanical Engineers (ASME), 2009)The P1 model is often used to obtain approximate solutions of the radiative transfer equation for heat transfer in a participating medium. For large problems, the algebraic equations used to ... -
Oscillation Effect of Impingement Surface on Two-Dimensional Impingement Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2009)This paper describes the oscillation effect of impingement surface on two-dimensional impingement heat transfer with confined wall. The local temperature distribution on an impingement surface was ... -
Convective Condensation of Vapor in Laminar Flow in a Vertical Parallel Plate Channel in the Presence of a High-Concentration Noncondensable Gas
(The American Society of Mechanical Engineers (ASME), 2009)The problem of laminar film condensation of a vapor from vapor-gas mixture in laminar flow in a vertical parallel plate channel is formulated theoretically. The flowing gas-vapor mixture contains ... -
Effect of Longitudinal Minigrooves on Flow Stability and Wave Characteristics of Falling Liquid Films
(The American Society of Mechanical Engineers (ASME), 2009)Falling liquid films are used in many industrial apparatuses. In many cases the film flow along a wall with topography is considered advantageous for intensification of the heat and mass ... -
The Flow of Non-Newtonian Fluids on a Flat Plate With a Uniform Heat Flux
(The American Society of Mechanical Engineers (ASME), 2009)Forced convective heat transfer of non-Newtonian fluids on a flat plate with the heating condition of uniform surface heat flux has been investigated using a modified power-law viscosity model. ... -
Transient Method for Convective Heat Transfer Measurement With Lateral Conduction—Part II: Application to an Isolated Spherical Roughness Element
(The American Society of Mechanical Engineers (ASME), 2009)The effect of lateral conduction on convective heat transfer measurements using a transient infrared technique over an isolated spherical roughness element (bump) is evaluated. Comparisons are ...