Journal of Heat Transfer: Recent submissions
Now showing items 3061-3080 of 3611
-
An Experimental Study on Heat Transfer Around Two Side-by-Side Closely Arranged Circular Cylinders
(The American Society of Mechanical Engineers (ASME), 2010)The present paper describes heat transfer around two side-by-side closely arranged circular cylinders. The flows around two circular cylinders in a side-by-side arrangement can be classified into ... -
On the Analysis of the Aerodynamic Heating Problem
(The American Society of Mechanical Engineers (ASME), 2010)A complete analytical solution to the problem of aerodynamic heating is lacking in heat transfer textbooks, which are used for undergraduate and graduate education. There are many issues that ... -
On the Condition for Thermal Rectification Using Bulk Materials
(The American Society of Mechanical Engineers (ASME), 2010)In conduction, thermal rectification occurs when a material or structure transfers heat asymmetrically. In this work, it is shown that, in the bulk, a necessary condition for thermal rectification ... -
Enhanced Convective Heat Transfer in Nongas Generating Nanoparticle Thermites
(The American Society of Mechanical Engineers (ASME), 2010)Flame propagation and peak pressure measurements were taken of two nanoscaled thermites using aluminum (Al) fuel and copper oxide (CuO) or nickel oxide (NiO) oxidizers in a confined flame tube ... -
Numerical Simulations of the Dynamics and Heat Transfer Associated With a Single Bubble in Subcooled Pool Boiling
(The American Society of Mechanical Engineers (ASME), 2010)In this study, numerical simulations of a vapor bubble in subcooled pool boiling have been performed. The applied numerical procedure coupling level-set function with moving mesh method has been ... -
Nucleate Pool Boiling Heat Transfer of R134a and R134a-PVE Lubricant Mixtures on Smooth and Five Enhanced Tubes
(The American Society of Mechanical Engineers (ASME), 2010)Pool boiling heat transfer coefficients of R134a with different lubricant mass fractions for one smooth tube and five enhanced tubes were tested at a saturation temperature of 6°C. The ... -
Poiseuille Flow of Reactive Phan–Thien–Tanner Liquids in 1D Channel Flow
(The American Society of Mechanical Engineers (ASME), 2010)We investigate, using direct numerical simulations, the effects of viscoelasticity on pressure driven flows of thermally decomposable liquids in channels. A numerical algorithm based on the finite ... -
A Computational Fluid Dynamics Study on the Effect of Carbon Particle Seeding for the Improvement of Solar Reactor Performance
(The American Society of Mechanical Engineers (ASME), 2010)This study focuses on a technique, referred to as “solar cracking” of natural gas for the coproduction of hydrogen and carbon as byproduct with zero emission footprint. Seeding a solar reactor ... -
Influence of Inter- and Intraband Transitions to Electron Temperature Decay in Noble Metals After Short-Pulsed Laser Heating
(The American Society of Mechanical Engineers (ASME), 2010)This work examines the effects of photonically induced interband excitations from the d-band to states at the Fermi energy on the electron temperature decay in noble metals. The change in the ... -
Experimental Investigation on the Heat Transfer of a Leading Edge Impingement Cooling System for Low Pressure Turbine Vanes
(The American Society of Mechanical Engineers (ASME), 2010)Impingement cooling through jet holes is a very attractive cooling system for heat rejection at high heat loaded areas as the leading edge of turbine vanes. Although some correlations and tools ... -
Entropy Generation Analysis for Nanofluid Flow in Microchannels
(The American Society of Mechanical Engineers (ASME), 2010)Employing a validated computer simulation model, entropy generation is analyzed in trapezoidal microchannels for steady laminar flow of pure water and CuO-water nanofluids. Focusing on microchannel ... -
Performance of Aluminum and Carbon Foams for Air Side Heat Transfer Augmentation
(The American Society of Mechanical Engineers (ASME), 2010)The air side heat transfer performance of three aluminum foam samples and three modified carbon foam samples are examined for comparison with multilouvered fins often found in compact heat ... -
Prediction of Local Heat Transfer in a Vertical Cavity Using Artificial Neutral Networks
(The American Society of Mechanical Engineers (ASME), 2010)A time-averaging technique was developed to measure the unsteady and turbulent free convection heat transfer in a tall vertical enclosure using a Mach–Zehnder interferometer. The method used a ... -
Formation Mechanism and Characteristics of a Liquid Microlayer in Microchannel Boiling System
(The American Society of Mechanical Engineers (ASME), 2010)Experiments were performed using the laser extinction method to measure the thickness of the liquid film formed by growing flattened bubbles in a microchannel for gap sizes of 0.5 mm, 0.3 mm, ... -
Analytical Solution Under Two-Flux Approximation to Radiative Heat Transfer in Absorbing Emitting and Anisotropically Scattering Medium
(The American Society of Mechanical Engineers (ASME), 2010)Radiative transfer in absorbing, emitting, and highly anisotropically scattering media is widely encountered in high temperature applications such as pulverized coal firing furnaces and high ... -
Calibration of a Computational Model to Predict Mist/Steam Impinging Jets Cooling With an Application to Gas Turbine Blades
(The American Society of Mechanical Engineers (ASME), 2010)In heavy-frame advanced turbine systems, steam is used as a coolant for turbine blade cooling. The concept of injecting mist into the impinging jets of steam was experimentally proved as an ... -
A Novel Methodology for Combined Parameter and Function Estimation Problems
(The American Society of Mechanical Engineers (ASME), 2010)This article presents a novel methodology, which is highly efficient and simple to implement, for simultaneous retrieval of a complete set of thermal coefficients in combined parameter and ... -
Laminar Boundary Layer Development Around a Circular Cylinder: Fluid Flow and Heat-Mass Transfer Characteristics
(The American Society of Mechanical Engineers (ASME), 2010)This paper presents a comprehensive computational work on the hydrodynamic, thermal, and mass transfer characteristics of a circular cylinder, subjected to confined flow at the cylinder Reynolds ... -
A Semi-Empirical Heat Transfer Model for Forced Convection in Pin-Fin Heat Sinks Subjected to Nonuniform Heating
(The American Society of Mechanical Engineers (ASME), 2010)This paper presents a cost effective semi-empirical analytical model for convective heat transfer in pin-fin heat sinks subjected to nonuniform heating set by a circular hot gas impinging jet. ... -
3D Integrated Water Cooling of a Composite Multilayer Stack of Chips
(The American Society of Mechanical Engineers (ASME), 2010)New generation supercomputers with three dimensional stacked chip architectures pose a major challenge with respect to the removal of dissipated heat, which can reach currently as high as 250 ...