Journal of Heat Transfer: Recent submissions
Now showing items 3041-3060 of 3611
-
Entropy Generation in Thin Films Evaluated From Phonon Radiative Transport
(The American Society of Mechanical Engineers (ASME), 2010)One of the approaches for micro/nanoscale heat transfer in semiconductors and dielectric materials is to use the Boltzmann transport equation, which reduces to the equation of phonon radiative ... -
Effect of Upstream Shear on Flow and Heat (Mass) Transfer Over a Flat Plate—Part II: Mass Transfer Measurements
(The American Society of Mechanical Engineers (ASME), 2010)Mass transfer measurements on a flat plate downstream of a belt moving in the same direction of the freestream study the effect of the upstream shear on the heat (mass) transfer for four ... -
A Four-Step Fixed-Grid Method for 1D Stefan Problems
(The American Society of Mechanical Engineers (ASME), 2010)This note is concerned with a fixed-grid finite difference method for the solution of one-dimensional free boundary problems. The method solves for the field variables and the location of the ... -
Optimal Thin-Film Topology Design for Specified Temperature Profiles in Resistive Heaters
(The American Society of Mechanical Engineers (ASME), 2010)In this paper, we optimized the topology of a thin-film resistive heater as well as the electrical potential of the electrodes on the boundaries. The objective was to minimize the difference ... -
Revisit of Laminar Film Condensation Boundary Layer Theory for Solution of Mixed Convection Condensation With or Without Noncondensables
(The American Society of Mechanical Engineers (ASME), 2010)This work presents a unique and unified formulation to solve the laminar film condensation two-phase boundary layer equations for the free, mixed, and forced convection regimes in the absence ... -
Effect of Rotation on Heat/Mass Transfer for an Impingement/Effusion Cooling System
(The American Society of Mechanical Engineers (ASME), 2010)In the present study, the effects of the rotating direction on heat/mass transfer in an impingement/effusion cooling system were investigated. The experiments were carried out with three different ... -
Effect of Upstream Shear on Flow and Heat (Mass) Transfer Over a Flat Plate—Part I: Velocity Measurements
(The American Society of Mechanical Engineers (ASME), 2010)A parametric study investigates the effects of wall shear on a two-dimensional turbulent boundary layer. A belt translating along the direction of the flow imparts the shear. Velocity measurements ... -
Editor's Farewell Note
(The American Society of Mechanical Engineers (ASME), 2010)It has been an honor and a privilege for me to serve as the Editor for the ASME Journal of Heat Transfer over the last five years. Though it has been challenging and time consuming, I ... -
Forced Flow of Vapor Condensing Over a Horizontal Plate (Problem of Cess and Koh): Steady and Unsteady Solutions of the Full 2D Problem
(The American Society of Mechanical Engineers (ASME), 2010)Accurate steady and unsteady numerical solutions of the full 2D governing equations—which model the forced film condensation flow of saturated vapor over a semi-infinite horizontal plate (the ... -
Vadasz Number Influence on Vibration in a Rotating Porous Layer Placed Far Away From the Axis of Rotation
(The American Society of Mechanical Engineers (ASME), 2010)We consider vibration effects on the classical Rayleigh–Be’nard problem and the classical (1994, “Stability of Free Convection in a Narrow Porous Layer Subject to Rotation,” Int. Commun. Heat ... -
An Experimentally Validated Numerical Modeling Technique for Perforated Plate Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2010)Cryogenic and high-temperature systems often require compact heat exchangers with a high resistance to axial conduction in order to control the heat transfer induced by axial temperature differences. ... -
Large Convective Heat Transfer Enhancement in Microchannels With a Train of Coflowing Immiscible or Colloidal Droplets
(The American Society of Mechanical Engineers (ASME), 2010)We show that heat transfer in microchannels can be considerably augmented by introducing droplets or slugs of an immiscible liquid into the main fluid flow. We numerically investigate the ... -
Numerical Analysis of Interaction Between Inertial and Thermosolutal Buoyancy Forces on Convective Heat Transfer in a Lid-Driven Cavity
(The American Society of Mechanical Engineers (ASME), 2010)In this paper, results on double diffusive mixed convection in a lid-driven cavity are discussed in detail with a focus on the effect of interaction between fluid inertial force and thermosolutal ... -
Thermohydraulic Study of a Flat Plate Heat Pipe by Means of Confocal Microscopy: Application to a 2D Capillary Structure
(The American Society of Mechanical Engineers (ASME), 2010)Thermal and hydrodynamic experimental results of a flat plate heat pipe (FPHP) are presented. The capillary structure is made of crossed grooves machined in a copper plate. The shape of the ... -
On Variance-Reduced Simulations of the Boltzmann Transport Equation for Small-Scale Heat Transfer Applications
(The American Society of Mechanical Engineers (ASME), 2010)We present and discuss a variance-reduced stochastic particle simulation method for solving the relaxation-time model of the Boltzmann transport equation. The variance reduction, achieved by ... -
Second Law Analysis of Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2010)This paper further explores the topic of an ideal heat exchanger, which is still an open question. It is shown that the minimization of entropy production or exergy destruction should not be ... -
Scale-Up and Generalization of Horizontal-Base Pin-Fin Heat Sinks in Natural Convection and Radiation
(The American Society of Mechanical Engineers (ASME), 2010)This paper provides further insight in heat transfer from horizontal-base pin fin heat-sinks in free convection of air. The main objective is to assess the effect of base size, and this with ... -
Radiation and Conduction in an Isotropic Scattering Rectangular Medium With One Semitransparent and Diffusely Reflecting Boundary
(The American Society of Mechanical Engineers (ASME), 2010)Using the ray tracing-node analyzing method, the 2D transient coupled radiative and conductive heat transfer in a rectangular semitransparent medium is investigated. The rectangular medium has one ... -
Simple Models for Laminar Thermally Developing Slug Flow in Noncircular Ducts and Channels
(The American Society of Mechanical Engineers (ASME), 2010)Solutions to the classical Graetz slug flow problem (uniform velocity distribution) in noncircular ducts are examined. These solutions have applications where a constant uniform velocity distribution ... -
Combined Effects of Temperature and Velocity Jump on the Heat Transfer, Fluid Flow, and Entropy Generation Over a Single Rotating Disk
(The American Society of Mechanical Engineers (ASME), 2010)The present work examines the effects of temperature and velocity jump conditions on heat transfer, fluid flow, and entropy generation. As the physical model, the axially symmetrical steady flow ...