Journal of Heat Transfer: Recent submissions
Now showing items 3021-3040 of 3611
-
Analytical Solutions for Anisotropic Heat Conduction Problems in a Trimaterial With Heat Sources
(The American Society of Mechanical Engineers (ASME), 2010)In this work, the analytical solution of a fundamental problem of heat conduction in anisotropic medium is derived. The steady-state temperature field in an anisotropic trimaterial subject to ... -
Limiting Length, Steady Spread, and Nongrowing Flames in Concurrent Flow Over Solids
(The American Society of Mechanical Engineers (ASME), 2010)A detailed two-dimensional transient model has been formulated and numerically solved for concurrent flames over thick and thin solids in low-speed forced flows. The processes of flame growth ... -
A Novel Approach to Low Profile Heat Sink Design
(The American Society of Mechanical Engineers (ASME), 2010)This paper discusses the importance of developing cooling solutions for low profile devices. This is addressed with an experimental and theoretical study on forced convection cooling solution ... -
Reacting Turbulent Flow and Thermal Field in a Channel With Inclined Bluff Body Flame Holders
(The American Society of Mechanical Engineers (ASME), 2010)In this paper, a numerical study has been carried out to investigate the effects of inlet turbulent intensity and angle of attack on the chemically reacting turbulent flow and thermal fields ... -
Thermal Modeling of a Multilayer Insulation System
(The American Society of Mechanical Engineers (ASME), 2010)An analytical investigation of a novel multilayer insulation concept was conducted using an extended analytical model. This model was developed to accommodate a multilayer screen wire insulation ... -
Theoretical Study on Transient Hot-Strip Method by Numerical Analysis
(The American Society of Mechanical Engineers (ASME), 2010)This paper presented the effects of finite dimensions of the sample and nonzero heat capacity of the strip on thermal conductivity determination with the transient hot-strip method. Through the ... -
Gravity Scaling Parameter for Pool Boiling Heat Transfer
(The American Society of Mechanical Engineers (ASME), 2010)Although the effects of microgravity, earth gravity, and hypergravity (>1.5 g) on pool boiling heat flux have been studied previously, pool boiling heat flux data over a continuous range of ... -
Heater Size and Gravity Based Pool Boiling Regime Map: Transition Criteria Between Buoyancy and Surface Tension Dominated Boiling
(The American Society of Mechanical Engineers (ASME), 2010)A pool boiling regime map demarcating the boundary between the surface tension and buoyancy dominated boiling regimes is developed based on heater size and gravity. For large heaters and/or ... -
Momentum Conservation and Condensing Vapor Bubbles
(The American Society of Mechanical Engineers (ASME), 2010)Boiling is a common feature of many daily processes, such as making tea, cooking, and heating. The growth, rise, collapse, and final disappearance of vapor bubbles are ubiquitous features of ... -
Hierarchical Modeling of Heat Transfer in Silicon-Based Electronic Devices
(The American Society of Mechanical Engineers (ASME), 2010)A hierarchical model of heat transfer for the thermal analysis of electronic devices is presented. The integration of participating scales (from nanoscale to macroscales) is achieved by (i) ... -
Front Tracking Based Macroscopic Calculations of Columnar and Equiaxed Solidification of a Binary Alloy
(The American Society of Mechanical Engineers (ASME), 2010)The paper explores the potential of a recently developed special front tracking method in the identification of the interface between columnar and equiaxed structures formed during a binary alloy ... -
Second-Law Thermodynamic Comparison and Maximal Velocity Ratio Design of Shell-and-Tube Heat Exchangers With Continuous Helical Baffles
(The American Society of Mechanical Engineers (ASME), 2010)Shell-and-tube heat exchangers (STHXs) have been widely used in many industrial processes. In the present paper, flow and heat transfer characteristics of the shell-and-tube heat exchanger with ... -
Thermal Characterizations of Fin-Thin Film Systems
(The American Society of Mechanical Engineers (ASME), 2010)This work considers heat transfer in fin-thin film systems. Two types of these systems are analyzed: (A) a thin film sandwiched between two identical fin halves, and (B) a fin sandwiched ... -
Critical Heat Flux (CHF) of Subcooled Flow Boiling of Alumina Nanofluids in a Horizontal Microchannel
(The American Society of Mechanical Engineers (ASME), 2010)This work investigates subcooled flow boiling of aqueous based alumina nanofluids in 510 μm single microchannels with a focus on the effect of nanoparticles on the critical heat flux. The ... -
The Classical Nature of Thermal Conduction in Nanofluids
(The American Society of Mechanical Engineers (ASME), 2010)We show that a large set of nanofluid thermal conductivity data falls within the upper and lower Maxwell bounds for homogeneous systems. This indicates that the thermal conductivity of nanofluids ... -
Influence of Intense Symmetric Heating and Variable Physical Properties on the Thermo-Buoyant Airflow Inside Vertical Parallel-Plate Channels
(The American Society of Mechanical Engineers (ASME), 2010)This paper deals with the steady, laminar, and two-dimensional natural convection inside vertical parallel-plate channels with isoflux heating. The main objective of this paper is to assess the ... -
Exergy Analysis of Coil-Spring Turbulators Inserted in the Horizontal Concentric Tubes
(The American Society of Mechanical Engineers (ASME), 2010)In this study, to obtain definitive information about the effects of spring-type turbulators located in the inner pipe of a concentric heat exchanger, the rates of exergy transfer Nusselt ... -
Molecular Dynamics Simulation of Phonon Scattering at Silicon/Germanium Interfaces
(The American Society of Mechanical Engineers (ASME), 2010)Detailed phonon transport at Si/Ge interfaces is studied using the molecular dynamics wave-packet method. Three types of interfaces are investigated: A smooth interface, an interface with random ... -
Natural Convection in a Partially Heat Generating Rod Bundle Inside an Enclosure
(The American Society of Mechanical Engineers (ASME), 2010)Buoyancy induced flows in a partially heat generating rod bundle enclosed inside a tall cavity are investigated. First, a detailed experimental study is carried out, and the thermal hydraulics ... -
Performance of a Convectively Heated Rectangular Fin With a Step Change in Cross-Sectional Area and Losing Heat by Simultaneous Convection and Radiation (Step Fins Under Radiation Environment)
(The American Society of Mechanical Engineers (ASME), 2010)A numerical procedure has been used to study the thermal performance of a step convective-radiative fin with temperature dependent thermal conductivity and convective base heating. An analytical ...