Journal of Heat Transfer: Recent submissions
Now showing items 3001-3020 of 3611
-
Experimental Investigation of an Ultrathin Manifold Microchannel Heat Sink for Liquid-Cooled Chips
(The American Society of Mechanical Engineers (ASME), 2010)We report an experimental investigation of a novel, high performance ultrathin manifold microchannel heat sink. The heat sink consists of impinging liquid slot-jets on a structured surface fed ... -
Fluid Flow and Heat Transfer in a Horizontal Channel With Divergent Top Wall and Heated From Below
(The American Society of Mechanical Engineers (ASME), 2010)Secondary flow structure and its enhancement on the heat transfer in a horizontal divergent channel have been studied. The bottom wall is horizontal and is heated uniformly while the opposite ... -
A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels
(The American Society of Mechanical Engineers (ASME), 2010)Accurate prediction of critical heat flux (CHF) in microchannels and minichannels is of great interest in estimating the safe operational limits of cooling systems employing flow boiling. Scale ... -
Commentary
(The American Society of Mechanical Engineers (ASME), 2010)Dear Editor of ASME Journal of Heat Transfer, -
ESEM Imaging of Condensation on a Nanostructured Superhydrophobic Surface
(The American Society of Mechanical Engineers (ASME), 2010) -
On the Mechanism of Dropwise Condensation of Steam on Ion Implanted Metallic Surfaces
(The American Society of Mechanical Engineers (ASME), 2010)Our recent experimental studies indicate that nanostructured, chemically inhomogeneous surfaces are the origin of dropwise condensation of steam on ion implanted metals. Yet, the underlying microscopic ... -
Nonintrusive Measurements of Mixture Concentration Fields (Water + Glycerol) by Analyzing Diffraction Image Patterns of Spatially Fixed Fluorescent Nanoparticles
(The American Society of Mechanical Engineers (ASME), 2010) -
Evaporation Characteristics of Sessile Droplets on Nano-Patterned Hydrophobic Surfaces
(The American Society of Mechanical Engineers (ASME), 2010) -
Heat Flux Estimation in a Nonlinear Inverse Heat Conduction Problem With Moving Boundary
(The American Society of Mechanical Engineers (ASME), 2010)The estimation of heat flux in the nonlinear heat conduction problem becomes more challenging when the material at the boundary loses its mass due to phase change, chemical erosion, oxidation, ... -
Heat Flux and Temperature Field Estimation Using Differential Interferometer
(The American Society of Mechanical Engineers (ASME), 2010)A new methodology based on least-squares approach has been developed to estimate the temperature field from an interferogram recorded using a Differential interferometer (DI). The interferograms ... -
Marangoni Convection and Thin-Film Evaporation in Microstructured Wicks for Heat Pipes
(The American Society of Mechanical Engineers (ASME), 2010) -
Experimental Study on Heat Transfer and Pressure Drop of Recuperative Heat Exchangers Using Carbon Foam
(The American Society of Mechanical Engineers (ASME), 2010)This work focuses on the development of high-effectiveness recuperative heat exchangers using solid and corrugated carbon foam blocks. Characterization tests were conducted on heat transfer and ... -
Transient Behavior of Crossflow Heat Exchangers Due To Sinusoidal Excitation
(The American Society of Mechanical Engineers (ASME), 2010)Transient temperature response of crossflow heat exchangers with both fluids unmixed and finite wall capacitance is investigated numerically for sinusoidal excitation provided in hot fluid inlet ... -
An Experimental Study to Show the Effect of Thermal Stress on Thermal Contact Conductance at Sub-megapascal Contact Pressures
(The American Society of Mechanical Engineers (ASME), 2010)Experimental studies are presented to show the effect of thermal stresses on thermal contact conductance (TCC) at low contact pressures. It is observed that in a closed contact assembly, contact ... -
Experimental and Numerical Investigation of Heat Transfer Characteristics of Inline and Staggered Arrays of Impinging Jets
(The American Society of Mechanical Engineers (ASME), 2010)A combined experimental and numerical investigation of the heat transfer characteristics within an array of impinging jets has been conducted. The experiments were carried out in a perspex model ... -
Nanofluid Convection in Microtubes
(The American Society of Mechanical Engineers (ASME), 2010)While there has been much previous research on the thermal conductivity and convection performance of nanofluids, these data are rarely reported together with effective viscosity data that govern ... -
Numerical Investigation of Local Entropy Generation for Laminar Flow in Rotating-Disk Systems
(The American Society of Mechanical Engineers (ASME), 2010)The entropy generation is investigated numerically in axisymmetric, steady-state, and incompressible laminar flow in a rotating single free disk. The finite-volume method is used for solving the ... -
Harvesting Nanoscale Thermal Radiation Using Pyroelectric Materials
(The American Society of Mechanical Engineers (ASME), 2010)Pyroelectric energy conversion offers a way to convert waste heat directly into electricity. It makes use of the pyroelectric effect to create a flow of charge to or from the surface of a ... -
Transient Thermal Analyses of Midwall Cooling and External Cooling Methods for a Gun Barrel
(The American Society of Mechanical Engineers (ASME), 2010)Liquid cooling methods are often used for thermal management of a large caliber gun barrel. In this work, transient thermal analyses of midwall-cooled and externally cooled gun barrels were ... -
Effect of Selective Accommodation on Soot Aggregate Shielding in Time-Resolved Laser-Induced Incandescence Experiments
(The American Society of Mechanical Engineers (ASME), 2010)Time-resolved laser-induced incandescence is an emerging diagnostic for characterizing primary particle size distributions within soot-laden aerosols. This measurement requires an accurate model of ...