Journal of Heat Transfer: Recent submissions
Now showing items 2981-3000 of 3611
-
Viscous Dissipation and Rarefaction Effects on Laminar Forced Convection in Microchannels
(The American Society of Mechanical Engineers (ASME), 2010)Fluid flow in microchannels has some characteristics, which one of them is rarefaction effect related with gas flow. In the present work, hydrodynamically and thermally fully developed laminar ... -
Numerical Analysis of Convective Heat Transfer From an Elliptic Pin Fin Heat Sink With and Without Metal Foam Insert
(The American Society of Mechanical Engineers (ASME), 2010)A numerical analysis of forced convective heat transfer from an elliptical pin fin heat sink with and without metal foam inserts is conducted using three-dimensional conjugate heat transfer ... -
Enhancement of Saturation Boiling of PF-5060 on Microporous Copper Dendrite Surfaces
(The American Society of Mechanical Engineers (ASME), 2010)Experiments are performed to investigate saturation boiling of degassed PF-5060 dielectric liquid on microporous copper dendrite surface layers deposited on 10×10 mm2 Cu substrates. The ... -
Proper Orthogonal Decomposition for Reduced Order Thermal Modeling of Air Cooled Data Centers
(The American Society of Mechanical Engineers (ASME), 2010)Computational fluid dynamics/heat transfer (CFD/HT) methods are too time consuming and costly to examine the effect of multiple design variables on the system thermal performance, especially for ... -
Transient Temperature Data Analysis for a Supersonic Flight Test
(The American Society of Mechanical Engineers (ASME), 2010)Determination of transient surface heat flux from the temperature data is one of the traditional techniques applied in many engineering applications. With respect to high speed flight experiments, ... -
Laminar Forced Convection Flow Past an In-Line Elliptical Cylinder Array With Inclination
(The American Society of Mechanical Engineers (ASME), 2010)Laminar forced convection flow past an in-line elliptical cylinder array with inclination is simulated using the finite element method. The inclination of the elliptical cylinders is increased ... -
Analysis of Microheat Pipes With Axial Conduction in the Solid Wall
(The American Society of Mechanical Engineers (ASME), 2010)A one-dimensional, steady-state model of a triangular microheat pipe (MHP) is developed, with the main purpose of investigating the thermal effects of the solid wall on the heat transport ... -
Airflow and Cooling in a Data Center
(The American Society of Mechanical Engineers (ASME), 2010)This paper deals with the distribution of airflow and the resulting cooling in a data center. First, the cooling challenge is described and the concept of a raised-floor data center is ... -
Thermal Conductance of a Multilayer Drift Chamber: An Experimental Approach
(The American Society of Mechanical Engineers (ASME), 2010)Drift chambers in the compact muon solenoid (CMS) detector are piled modular structures joined together by a structural adhesive. This structure is used for the detection and tracking of high ... -
Particle Aspect-Ratio and Agglomeration-State Effects on the Effective Thermal Conductivity of Aqueous Suspensions of Multiwalled Carbon Nanotubes
(The American Society of Mechanical Engineers (ASME), 2010)The effective thermal conductivities of aqueous nanofluids containing surfactant-stabilized multiwalled carbon nanotubes were measured and compared with the predictions of effective medium theory (, ... -
Multi-Objective Optimization of Heat Exchanger Design by Entropy Generation Minimization
(The American Society of Mechanical Engineers (ASME), 2010)In the present work, a multi-objective optimization of heat exchanger thermal design in the framework of the entropy generation minimization is presented. The objectives are to minimize the ... -
Analytical Solution for Forced Convection in a Sector Duct Filled With a Porous Medium
(The American Society of Mechanical Engineers (ASME), 2010)The fully developed viscous flow through a sector duct filled with a porous medium is studied. The Darcy–Brinkman and energy equations are solved analytically by series expansions in Bessel ... -
Modeling Carrier-Phonon Nonequilibrium Due to Pulsed Laser Interaction With Nanoscale Silicon Films
(The American Society of Mechanical Engineers (ASME), 2010)Ultrashort-pulsed laser irradiation on semiconductors creates a thermal nonequilibrium between carriers and phonons. Previous computational studies used the “two-temperature” model and its variants ... -
Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Axial Corrugation Roughness and Twisted Tapes With Oblique Teeth
(The American Society of Mechanical Engineers (ASME), 2010)The heat transfer and the pressure drop characteristics of laminar flow of viscous oil (175<Pr<538) through rectangular and square ducts with combined internal axial corrugations on all the ... -
Bubble Dynamics for Nucleate Pool Boiling of Electrolyte Solutions
(The American Society of Mechanical Engineers (ASME), 2010)Bubble dynamics is the most important subphenomenon, which basically affects the nucleate pool boiling heat transfer coefficient. Previous investigations state that the effect of physical properties ... -
Rendering the Transient Hot Wire Experimental Method for Thermal Conductivity Estimation to Two-Phase Systems—Theoretical Leading Order Results
(The American Society of Mechanical Engineers (ASME), 2010)The transient hot wire experimental method for estimating the thermal conductivity of fluids and solids is well established as the most accurate, reliable, and robust technique. It essentially ... -
Impact of Thermodiffusion on Carbon Nanotube Growth by Chemical Vapor Deposition
(The American Society of Mechanical Engineers (ASME), 2010)Thermal diffusion, the process by which a multicomponent mixture develops a concentration gradient when exposed to a temperature gradient, has been studied in order to understand if its inclusion ... -
Criteria for Cross-Plane Dominated Thermal Transport in Multilayer Thin Film Systems During Modulated Laser Heating
(The American Society of Mechanical Engineers (ASME), 2010)Pump-probe transient thermoreflectance (TTR) techniques are powerful tools for measuring the thermophysical properties of thin films, such as thermal conductivity, Λ, or thermal boundary conductance, ... -
A Meshless Finite Difference Method for Conjugate Heat Conduction Problems
(The American Society of Mechanical Engineers (ASME), 2010)A meshless finite difference method is developed for solving conjugate heat transfer problems. Starting with an arbitrary distribution of mesh points, derivatives are evaluated using a weighted ... -
Numerical Simulation of Convective Heat Transfer Modes in a Rectangular Area With a Heat Source and Conducting Walls
(The American Society of Mechanical Engineers (ASME), 2010)Laminar conjugate heat transfer in a rectangular area having finite thickness heat-conducting walls at local heating has been analyzed numerically. The heat source located on the left wall is ...