Journal of Heat Transfer: Recent submissions
Now showing items 3101-3120 of 3611
-
Simple Explicit Equations for Transient Heat Conduction in Finite Solids
(The American Society of Mechanical Engineers (ASME), 2009)Based on the one-term Fourier series solution, a simple equation is derived for low Biot number transient conduction in plates, cylinders, and spheres. In the 0<Bi<0.3 range, the solution ... -
Numerical Investigation of Electrohydrodynamic-Conduction Pumping of Liquid Film in the Presence of Evaporation
(The American Society of Mechanical Engineers (ASME), 2009)Electrohydrodynamic (EHD) conduction pumping is associated with the heterocharge layers of finite thickness in the vicinity of the electrodes, generated by the process of dissociation of the ... -
Forced Convection Flow in a Wavy Channel With a Linearly Increasing Waviness at the Entrance Region
(The American Society of Mechanical Engineers (ASME), 2009)This research studies the fluid flow and heat transfer in a wavy channel with a linearly increasing waviness at the entrance region. The considered model consists of a channel formed by two ... -
Analytical Solution to Transient Asymmetric Heat Conduction in a Multilayer Annulus
(The American Society of Mechanical Engineers (ASME), 2009)In this paper, we present an analytical double-series solution for the time-dependent asymmetric heat conduction in a multilayer annulus. In general, analytical solutions in multidimensional Cartesian ... -
The Heat/Mass Transfer Analogy for a Simulated Turbine Endwall With Fillets
(The American Society of Mechanical Engineers (ASME), 2009)Mass transfer measurements are employed as alternative methods for heat transfer measurement because of the difficulty of heat transfer measurements in thin boundary layers, complicated secondary ... -
The Effect of Pore Size on the Heat Transfer Between a Heated Finned Surface and a Saturated Porous Plate
(The American Society of Mechanical Engineers (ASME), 2009)An investigation was performed to examine the effect that the pore size in a porous plate had on the heat transfer between a heated finned surface and a saturated porous plate at different ... -
A Method for Determining the Heat Transfer Properties of Foam-Fins
(The American Society of Mechanical Engineers (ASME), 2009)Metallic and graphitic open-cell foams are being used or proposed as extended surfaces (fins) in heat sinks for electronic cooling and compact heat exchangers for aircraft applications. Three ... -
Transient Method for Convective Heat Transfer Measurement With Lateral Conduction—Part I: Application to a Deposit-Roughened Gas Turbine Surface
(The American Society of Mechanical Engineers (ASME), 2009)The effect of lateral conduction on convective heat transfer measurements using a transient infrared technique over a rough surface is evaluated. The rough surface is a scaled model of gas ... -
Effects of a High Porous Material on Heat Transfer and Flow in a Circular Tube
(The American Society of Mechanical Engineers (ASME), 2009)This paper describes the heat transfer and flow characteristics of a heat exchanger tube filled with a high porous material. Fine copper wires (diameter: 0.5 mm) were inserted in a circular ... -
Mixed Convection Along a Semi-Infinite Vertical Flat Plate With Uniform Surface Heat Flux
(The American Society of Mechanical Engineers (ASME), 2009)Mixed-convection boundary-layer flow over a heated semi-infinite vertical flat plate with uniform surface heat flux, placed in a uniform isothermal upward freestream, has been investigated. Near ... -
Steady-State Behavior of a Two-Phase Natural Circulation Loop With Thermodynamic Nonequilibrium
(The American Society of Mechanical Engineers (ASME), 2009)A model to predict the steady-state behavior of a rectangular two-phase natural circulation loop has been proposed. The analysis employs a one-dimensional two-fluid model to identify various ... -
Effortless Application of the Method of Lines for the Inverse Estimation of Temperatures in a Large Slab With Two Different Surface Heating Waveforms
(The American Society of Mechanical Engineers (ASME), 2009)The boundary inverse heat conduction problem (BIHCP) deals with the determination of the surface heat flux or the surface temperature from measured transient temperatures inside a conducting body ... -
Numerical and Experimental Study of Solidification in a Spherical Shell
(The American Society of Mechanical Engineers (ASME), 2009)The present study explores numerically and experimentally the process of a phase-change material (PCM) solidification in a spherical shell. At the initial state, the PCM liquid occupies 98.5% ... -
Mixed Convection in an Impinging Laminar Single Square Jet
(The American Society of Mechanical Engineers (ASME), 2009)The effect of Richardson number (Ri=Gr/Re2=Ra/Pr Re2) in a confined impinging laminar square jet was investigated numerically through the solution of Navier–Stokes and energy equations. The ... -
Influence of Near Hole Pressure Fluctuation on the Thermal Protection of a Film-Cooled Flat Plate
(The American Society of Mechanical Engineers (ASME), 2009)The pulsation of film cooling jets in turbines is driven by the near hole pressure fluctuation caused by the deterministic interaction of stator/rotor blade rows. Jet pulsation is characterized ... -
Thermal Transport Characteristics of Mixed Pressure and Electro-Osmotically Driven Flow in Micro- and Nanochannels With Joule Heating
(The American Society of Mechanical Engineers (ASME), 2009)This study investigates convective transport phenomena of combined electro-osmotic and pressure-driven flow in a microchannel subject to constant surface heat flux, with Joule heating effect taken ... -
Relative Contributions of Inelastic and Elastic Diffuse Phonon Scattering to Thermal Boundary Conductance Across Solid Interfaces
(The American Society of Mechanical Engineers (ASME), 2009)The accuracy of predictions of phonon thermal boundary conductance using traditional models such as the diffuse mismatch model (DMM) varies depending on the types of material comprising the ... -
Turbulent Rotating Rayleigh–Benard Convection: Spatiotemporal and Statistical Study
(The American Society of Mechanical Engineers (ASME), 2009)The present study involves a 3D numerical investigation of rotating Rayleigh–Benard convection in a large aspect-ratio (8:8:1) rectangular enclosure. The rectangular cavity is rotated about a ... -
Natural Convection Reduction in a Composite Air/Porous Annular Region With Horizontal Orientation
(The American Society of Mechanical Engineers (ASME), 2009)This paper deals with a numerical investigation on natural convection heat transfer in a long horizontal annular region formed with a heated inner cylinder and a cooled outer cylinder. Identifying ... -
Microscale Transport Phenomena in Materials Processing
(The American Society of Mechanical Engineers (ASME), 2009)Microscale transport mechanisms play a critical role in the thermal processing of materials because changes in the structure and characteristics of the material largely occur at these or smaller ...