Journal of Structural Engineering: Recent submissions
Now showing items 4721-4740 of 10765
-
Finite-Element Investigation and Design Recommendations for Perforated Steel Plate Shear Walls
(American Society of Civil Engineers, 2009)This paper presents results from an investigation of the behavior of unstiffened thin steel plate shear wall (SPSW) having a regular pattern of openings (a.k.a. perforated SPSW). Finite element monotonic pushover analyses ... -
Damage Avoidance Design Steel Beam-Column Moment Connection Using High-Force-to-Volume Dissipators
(American Society of Civil Engineers, 2009)Existing welded steel moment frames are designed to tolerate substantial yielding and plastic rotation under earthquake loads. This sacrificial design approach can lead to permanent, and often irreparable damage when ... -
Seismic Behavior of PC Column and Steel Beam Composite Moment Frame with Posttensioned Connection
(American Society of Civil Engineers, 2009)This paper presents test results of two large-scale precast concrete (PC) column/footing and steel beam subassemblies. In the model subassemblies, the steel beams were posttensioned by high-strength steel rods to the PC ... -
Response of Restrained Concrete Beams under Design Fire Exposure
(American Society of Civil Engineers, 2009)Results from fire resistance experiments on six RC beams are presented in this paper. The test variables included concrete strength (permeability), support conditions, fire scenario, and load ratio. Data from fire tests ... -
Hysteretic Behavior and Strength Capacity of Shallowly Embedded Steel Column Bases
(American Society of Civil Engineers, 2009)A series of shallowly embedded steel column base consisting of an exposed column base and a covering reinforced concrete floor slab were tested under horizontal cyclic loading to very large deformation. By adjustments to ... -
Behavior of Double Skin Composite Wall Subjected to In-Plane Cyclic Loading
(American Society of Civil Engineers, 2009)Double skin composite walls are composed of two steel plate “skins” connected by tie bars, with the space between them filled with concrete. They were developed to reduce wall thickness, to enhance constructability, and ... -
Nonlocal Damage Formulation for a Flexibility-Based Frame Element
(American Society of Civil Engineers, 2009)This paper presents the formulation for a novel flexibility-based one-dimensional (1D) finite element that captures material and structural softening within a reinforced concrete framed structure. Separating the total ... -
Generalization Capability of Neural Network Models for Temperature-Frequency Correlation Using Monitoring Data
(American Society of Civil Engineers, 2009)The parametric approach to eliminating the temperature-caused modal variability in vibration-based structural damage detection requires a correlation model between the modal properties and environmental temperatures. This ... -
Blast Resistance of Steel Plate Shear Walls Designed for Seismic Loading
(American Society of Civil Engineers, 2009)Steel plate shear walls (SPSWs) have become an increasingly popular lateral force resisting system in buildings. Although originally conceived to resist earthquake forces, recent developments raised questions as to the ... -
In-Plane Experimental Behavior of Stone Masonry Walls under Cyclic Loading
(American Society of Civil Engineers, 2009)Stone masonry is the oldest building material that survived until today, being used all over the world, particularly in impressive historic structures as an evidence of the achievements of ancient cultures. Stone walls are ... -
Air-Blast Effects on Structural Shapes of Finite Width
(American Society of Civil Engineers, 2010)In blast engineering, many designs begin with simplified hand procedures with the loading parameters determined based upon a reflective surface of infinite size. Individual structural members such as columns have finite ... -
Experimental Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns
(American Society of Civil Engineers, 2009)This paper describes an experimental program carried out at the University of Sydney to study the interaction of local and overall flexural buckling in stainless steel I-columns. The columns were composed of cold-formed ... -
Numerical Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns
(American Society of Civil Engineers, 2009)This report describes research carried out at the University of Sydney to study the interaction of local and overall buckling in stainless steel I-columns. A finite-element model was constructed using the commercially ... -
Performance of Steel-Concrete Composite Beams under Combined Bending and Torsion
(American Society of Civil Engineers, 2009)Eleven steel-concrete composite beams, four under pure torsion, and seven under combined bending and torsion were tested to study their torsional behaviors. Torsion-dominated and bending-dominated failure modes were observed, ... -
Physical-Parameter Identification of Base-Isolated Buildings Using Backbone Curves
(American Society of Civil Engineers, 2009)In this paper, a simplified system identification procedure is developed to investigate the dynamic characteristics of base-isolated buildings equipped with lead-rubber bearings (LRBs). The multistory superstructure is ... -
Discussion of “Buckling and Second-Order Effects in Dual Shear-Flexural Systems” by Tong Gengshu, Yong-Lin Pi, Mark Andrew Bradford, and Francis Tin-Loi
(American Society of Civil Engineers, 2011) -
Fiber Heat Transfer Element for Modeling the Thermal Response of Structures in Fire
(American Society of Civil Engineers, 2009)This paper introduces a novel type of heat transfer finite element that can be used to model the three-dimensional thermal response of structural beams and columns subjected to elevated temperatures associated with fire. ... -
Lateral Buckling Strength of Simply Supported LiteSteel Beams Subject to Moment Gradient Effects
(American Society of Civil Engineers, 2009)The flexural capacity of a new cold-formed hollow flange channel section known as LiteSteel beam (LSB) is limited by lateral distortional buckling for intermediate spans, which is characterized by simultaneous lateral ... -
Cyclic Behavior of RC Columns Strengthened by FRP and Steel Devices
(American Society of Civil Engineers, 2009)This paper presents several results of a wide experimental program undertaken to evaluate the seismic performance of RC columns, externally confined with fiber-reinforced polymers (FRPs). Specimens consisted of full scale ... -
Frame Element for Metallic Shear-Yielding Members under Cyclic Loading
(American Society of Civil Engineers, 2009)Modeling the energy dissipation capacity of shear-yielding members is important in the evaluation of the seismic response of earthquake resistant structural systems. This paper presents the model of a frame element for the ...